Bad class D solution TPA3251| What I learned on the Texas Instrument class d

Sdílet
Vložit
  • čas přidán 17. 10. 2023
  • the things I like and don't like about T.I. TAP3251 class D power amplifier
    Link to the report :
    can email me for now dandymenor@hotmail.com as goggle drive is not working, including my 1diyshare.com ftp
    Videos related to TPA3251:
    BEST sounding LIVE Class D TPA3251 | Reimagined Hotel California
    • BEST sounding LIVE Cla...
    How GOOD this Class D Power Amplifier judge by the Electrical Parametric Test
    • TPA3251 | How GOOD thi...
    Class-D Pure Path Ultra HD Texas Instrument TI Single Chip Class D
    • TPA3251 | Class-D Pur...
    Goodbye NXP Class-D WELCOME Texas Instrument Class-D | TPA3250 TPA3251 and TPA3255 class-D
    • Goodbye NXP Class-D W...
    Thak you.
    Project History:
    The TPA3251 chipset from T.I. runs the main chipset of the TPA3251 module PCBA which will be used to replaced the EOL chipset from NXP the TDA8920BTH and TDA8950TH.
  • Jak na to + styl

Komentáře • 6

  • @voltagetoe
    @voltagetoe Před 8 měsíci

    nice to see someone actually looking into the distortion problem of these cheap end boards. i've tried a few and the distortion has made them rather useless. next i'll be trying TDA7498E because i saw some okayish measurements of it (low distortion & low noise/hiss). The FOSI V3 has a very good sound btw but it is very limited in terms of its connections.

    • @dr100wconceptpoweramplifier
      @dr100wconceptpoweramplifier  Před 8 měsíci

      thank you for your nice comment. I agree with you about these TPA325x (50/51/55) standalone modules (from China, maybe) are useless modules in a point of maximizing its power output capability specially when loading it with 4 ohms load/speakers -- the worst when tried 3 ohms or even 2 ohms, if there is no supervisory Micro Controller that manage the killing point (shutdown caused by overtemperature). In terms of distortion parametrically was fine with 1 KHZ signal, however, I am not yet into the casing level where I can hook the real speakers and have my listening pleasure. Soon, once the casing done with all the cabling and its own SMPS, I can perform the Sound Quality, Stereo Separation, S/N, Distortion with my equipment and also acoustically. It looks the TDA7498E sounds interesting to look at, anyone send a sample to me for a try?

  • @CABohol
    @CABohol Před 9 měsíci

    Nice sir. 👍

  • @wilsont1010
    @wilsont1010 Před 3 měsíci

    Are you saying that we shouldn't buy one with the TPA3251?

    • @dr100wconceptpoweramplifier
      @dr100wconceptpoweramplifier  Před 3 měsíci

      Thanks for asking, the short answer is ...... not really! I am sharing the adventure of this chipset specific to the modular board (chinese made board), oppurtunities, improvements , the good stuff and the thigns I personally I don't like --- its the "killing point". This link is the updated test and observations/conclusion : czcams.com/video/qtGut4TUusg/video.htmlsi=FmrlH9wnxv9zYD2Z