4 days of pulling my hair out trying to get my 4400 trying to work with Air-Lap1131AG and getting nowhere. Watched your video, and now I can sleep at night!!!
Thanks for a very informative video. Perhaps a small suggestion: Your mouth noises are quite audible and distracting. Not trolling, just offering a little feedback that might make your videos more pleasurable to view. Thanks again.
Hi Raj, thanks for this impressiveand informative video, I dont have muchexperience in the field of Cisco networking but understand all your video exactly, can I request you to either create new or if you already have(include link) video for Cisco 887AVG Router configuration for this same purpose
Hi There. Could you please elaborate on how you have your physical network set up? I have a 3560 L3 switch, a 4404 WLC, a LAP1262-N-A-K9 LWAP, and a host of other equipment. I live in an apartment so I've got their private network as my "WAN" (192.168.101.X). Any advice you could give would be great. Note - I have my CCNA so I'm comfortable configuring everything, I just don't know how you have your setup mainly to your WAN.
Hi. i have followed the steps however i am unable to ping the service ip address in order to login via GUI. Is there something i am missing. After the reboot of the box, i can be able to login with the username and password used. At what stage are the licenses required?
I need to configure Guest ssid who have access only to interenet - not access to local LAN. Do I need configure on router (or switch) or on the wifi controler (and do you have example)?
Are you still looking for the solution ? You need to create an interface with the appropriate VLAN info(the one you want to use for interface only) and then create a WLAN (say name Guest). In the WLAN make sure under Interface/Interface Group you select the interface that you created for Guest. On the switch side make sure that VLAN(the VLAN that is only used for internet ) is allowed in the up link of WLC
Any idea why my guest SSID will not get the correct dhcp scope? I am using an external DHCP server and my main SSID works fine. My guest SSID however gets the same vlan and subnet as my internal ssid.
@@avijittalukdar6183 Hi thanks for the reply. I figured out my issue. My LAN setup required me to tag the AP VLAN on native and everything is working now, thanks.
I have problems detecting my APs, I follow the whole tutorial perfectly but when I execute the command "sh ip int brief" it does not show the APs that are connected in the network. Do I have to take an extra step ?? I work with a WLC 5500
Nice Video. I have a cisco 2504 wlc I used the express setup to give a new management IP. Now, I cannot log on to the wlc via ethernet. Serial connection via console won't even work. It only shows connected on the hyperterminal but displays NOTHING endlessly. Someone help
4 days of pulling my hair out trying to get my 4400 trying to work with Air-Lap1131AG and getting nowhere. Watched your video, and now I can sleep at night!!!
Very clear and detailed lab. Thank you so much for doing this as it's helped me a bunch.
A good introduction to WLC. Thanks for creating and sharing the video.
Nice vedio to learn many things about controller...
Upload part 2...
Very Comprehensive and Quick Video...Many Thanks....
Thank you for making this video!!!!!
This is an excellent accent and wonderful topic, thank you so very much.
what a nice tutorial sir....was really helful
This lab was really helpful. Thank you!
this guys is the best ever ... he was very detail .Thanks so much for this tutorial.
Great lesson!
Great job, thanks a ton!
thank you sir !! I love your explain
hi dear you have only part 1 to configuration or we have to wait for part 2 ....
what a great video thanks man!!
Tnx for this video guide!
Excellent !!
Thanks for a very informative video. Perhaps a small suggestion: Your mouth noises are quite audible and distracting. Not trolling, just offering a little feedback that might make your videos more pleasurable to view.
Thanks again.
Hi Raj, thanks for this impressiveand informative video, I dont have muchexperience in the field of Cisco networking but understand all your video exactly, can I request you to either create new or if you already have(include link) video for Cisco 887AVG Router configuration for this same purpose
damn son, you got an 887 rooster! Does it eat the antennas on the router
Hi There. Could you please elaborate on how you have your physical network set up? I have a 3560 L3 switch, a 4404 WLC, a LAP1262-N-A-K9 LWAP, and a host of other equipment. I live in an apartment so I've got their private network as my "WAN" (192.168.101.X). Any advice you could give would be great.
Note - I have my CCNA so I'm comfortable configuring everything, I just don't know how you have your setup mainly to your WAN.
hi i have Cisco 2600 Airnet but i lack of Power supply v48 can you tell me if i can install and configure with POE?
Hi, Very clear and detailed lab. to bad that there is no Part2 :(
Like to know how to config Security :)
thanks its very clear
Hi. i have followed the steps however i am unable to ping the service ip address in order to login via GUI. Is there something i am missing. After the reboot of the box, i can be able to login with the username and password used. At what stage are the licenses required?
I need to configure Guest ssid who have access only to interenet - not access to local LAN. Do I need configure on router (or switch) or on the wifi controler (and do you have example)?
Are you still looking for the solution ? You need to create an interface with the appropriate VLAN info(the one you want to use for interface only) and then create a WLAN (say name Guest). In the WLAN make sure under Interface/Interface Group you select the interface that you created for Guest. On the switch side make sure that VLAN(the VLAN that is only used for internet ) is allowed in the up link of WLC
How to enable email id and password in one of the wireless connection that has "open authentication"?
why set internal dns as secondary? Doesn't make sense
in the router does it support switchport mode access /trunk command ?
how to set alerts when AP goes offline on wireless controller 2504? any help?
I believe only Prime Infra can do that. Or you use some 3rd party monitoring tools.
Where can I download the WLC software?
Any idea why my guest SSID will not get the correct dhcp scope? I am using an external DHCP server and my main SSID works fine. My guest SSID however gets the same vlan and subnet as my internal ssid.
you need to create a separate interface for Guest. Under Guest SSD chose the right interface under interface/interface group.
@@avijittalukdar6183 Hi thanks for the reply. I figured out my issue. My LAN setup required me to tag the AP VLAN on native and everything is working now, thanks.
I have problems detecting my APs, I follow the whole tutorial perfectly but when I execute the command "sh ip int brief" it does not show the APs that are connected in the network. Do I have to take an extra step ?? I work with a WLC 5500
sh ap inventory
show interface summary
ping x.x.x.x
show ap summary
show ap inventory
Nice Video. I have a cisco 2504 wlc I used the express setup to give a new management IP. Now, I cannot log on to the wlc via ethernet. Serial connection via console won't even work. It only shows connected on the hyperterminal but displays NOTHING endlessly. Someone help
What if we have multiple aironet devices and how can we configure handover?
I need help configuring for a church. can someone please help me
Very nice, is there an email id I can contact you for questions?
CISCO AIR WIRELESS LAN CONTROLLER CONFIGURATION LAB part 1
Very clear and detailed lab. Thank you so much for doing this as it's helped me a bunch.