JBL POWERED SPEAKER NO SOUND REPAIR LSR2300 SERIES LSR2325P
Vložit
- čas přidán 5. 09. 2024
- I have a JBL powered speaker that came in for no audio situation. After a little troubleshooting I found a bad voltage regulator and replaced all 4 capacitors just as a precaution.
If you would like to support my video efforts please consider making a donation at www.paypal.me/... Remember with your help we can keep these things out of the landfill, out of the recycle bin, and out of the E-waste facility! Thanks for watching.
Follow me on social media Facebook, Instagram, and Twitter @NorCal715
Email NORCAL715videos@gmail.com
A special thanks for all
who have contributed
to my video efforts!
Teri DeLeo
Kelly Knutson
Howard Goble
Diana Williams
Reed Graham
Christopher Wang
David Ammerlaan
John Johnson
Scott Kullen (thanks for monthly support)
Shaheed Amirkhan
Brett Sherry
Joseph L Ozvold
Sweidan Omar
John Eggers
Linda Kuo
Daniel Pyles
Melanie Branton
Lisa Sklar
Barry Marchant
Uri Cohen (multiple times)
Scott Kullen
John Harper
Larry Mcdonald
Annette Lewis
Howard Goble
Hugo Tajimaroa
M R Rajesh
Dan Latorre
You should have put a heatsink on each of them. They don't cost much and helps cool down the regulators.
I'm glad you give explanations of what you are doing and why. Like at 5:30 to 6:00 min. with the effect failed capacitors could have in that circuit. That is the kind of information that is not always available when reading books or watching other videos. Thanks again for another great video.
Good tip on the blk tape for IR temp reading.
I’m just dealing with this same board at present - same problem; I couldn’t source the exact same output filter caps for the 15v reg’s - I also used a 640uF 40v cap - which works fine.
It’s come back to life however my low frequency amp is extremely low output - more diagnosis !
This worked for as advertised. 2$ for the caps and a lot of patience with soldering. The speaker sounds like new.
Hi there! Good Video!! I actually own these speakers and had them for about 9 years. I replaced all those caps about a year ago when one of the pair had a buzz. I just wanted to do it for both. Recently I also had a deep low freq hum from one of them that I can't get rid or. I just replaced the Big filter caps but the problem din't go away. It's a low freq hum and also if you touch the speaker gently you can actually feel it's vibrating. It makes a large pop when turning on as well. I had it taken apart but could not figure out the issue. I am not a pro I am just a musician/ sound engineer with some chops for electronics. If I take it to the local guys they start from $120 plus whatever they find. I paid $150 for the speaker back brand new so it's not worth it right now especially being unemployed because of covid. It does work and the hum isn't super loud but sometimes it annoys me. Any idea what it could be?
Is the hum 60 Hz and does it seem to change as the speaker warms up or cools down?
@@norcal715 it is 60 and oscillating. Pulsing. No change in it when warms up. I have tested other parts of the monitor like input etc. I swapped this board into the other speaker cab just to cross test the problem is in the main board. But it did seem like that in the other enclosure the pop was a little less loud and a Hum was also not as great as here. But when putting the good board into this enclosure it was fine.
Hi Tomi, i have same problems with you know. my speakers have buzz when turn on. Do you have any ideas how to fix this? Please let me know. Thankyou !
Excellent info and repair! Thank you.
Brilliant! So much gear is tossed because a 15 cent part failed. Everyone push for "Right to Repair" laws.
checkout how far Louis Rossmann has gone for the "right to repair" He has a great channel.
Just say yes to acetone! 😆
When you recommend black tape for a consistent emissivity, are you referring to black electrical tape.
Yes
@@norcal715 thanks, good tip, I purchased one awhile back and found it kid of useless because each material has it' own emissivity, using some black tape should certainly improve the consistency of measurements
PERFECT DIAGNOSED
This was really helpful to see inside - I have a pair from way back myself. Mine really rattle at certain low frequencies (especially unmastered audio during recording). Any thoughts on what might be causing that? My assumption is maybe screws inside the cabinet. Ever notice that in your usage/testing?
These seem to be very well engineered speakers, at least as audio reproduction go's. I would look for a failing woofer, or something loose inside.
Who needs an o-scope, or a voltmeter, when you have an infracam.
amazing video
Hello, I am from Patagonia Argentina. By chance they brought a similar team to my workshop. I have no schematics. I found the 7915 with -2.65v at the output. Just in case I have replaced the 470uf and 100uf capacitors. Also the 1N4001 diodes. The device worked for a couple of hours and he had the same symptoms again. Treble is not heard. The bass is fine. I rechecked the 7915 and again there is no -15volt, only -2.60v. Can you give me any help, any advice? Anyway thanks for the video.
My speaker cone gets sucked in after changing the capacitors. Tweeter works fine thought. Any thoughts?
Did you get it figured out?
9:49 can you make a video about this? When is it safe to change microFarad? Thank you.
Usually capacitor value tolerances are +80% -20% I always try to avoid using smaller values but normally ok to increase values by a small amount.
@@norcal715 Great ty..
Hey bro, I just bought a brand new JBL 305p MK2 and it was playing very great first 2 days but today Its just playing at an insanely low level that i can barely hear. It's also making popping sounds here and their. Im still hearing bass but im hearing a loud Hiss noise when i put my hear close to the tweeters. Sometimes when i turn the volume knob at the back of the speakers up and down, after a while it will just start playing fine for a few minutes and then a pop and it start playing low again... Which makes me to believe maybe their is a loose wire of something inside the speaker? Im not an audio technition but I would appreciate your advice. Thank you
Get inside and flex things around and see if that makes a change. Probably loose connections.
Do You take questions at all or can I contact ? need some direction
the beancounters won this one
I have the exact same monitor but mine is making a buzzing noise when I turn it on. At first, it did it for a few seconds than stop but now its buzzing constantly so I am at the crossroad....these were supposed to last longer than five years ?
Try heating the components on the board with a hair dryer or heat gun and see if you can find that bad capacitor.
@@norcal715 Unfortunately, I do not have your skills (nor your equipment) to do such an operation. Instead, I will send it to the repairman although I have a much better knowledge of what's wrong with it. Thank you!!!
Hy sir i need esr meter circuit schematic diagram 🙏
google analog ESR meter diagram
I was expecting to see a D class amplifier! JBL seems to have gone down hill with some of the crap that they are making these days. This one is either an older model or they are actually using better Amplifiers on the better (more expensive) models and just selling the JBL brand on the cheaper one's. EEVBlog did one recently and it was powered by a class D amplifier, I was thoroughly disappointed! People are buying these things thinking that it's a quality JBL product! The brand is ruined for me, can't trust it anymore.
Class D doesn’t mean better… a well built class H or AB class amp with a good design will out perform any China built class D power amp design
@@dylandylan11731 at the end of the day, it all comes down to what sounds good to the individual person and that then depends on what equipment they have used...
When it comes to audio equipment, I'm a hoarder (self confessed) and I have at least over 100 amplifiers, whether consumer or pro grade or just amplifiers that are nothing more than PCB boards. I will confess that I don't own a class D two channel stereo amplifier, well not one that is commercially produced so I can't really comment on this but my Sony ES surround amplifier which is class D is terrible at music, movies are fine though...
How the hell you open it? Lol pls help
JBL professional "Baord" spelling not their strong suit.
Just Be Losing go M-Audio next time.
Do you ever have anything constructive to say, or you just a hater?
@@norcal715 , Steve, the haters are everywhere as you know. I watch many different CZcams channels, and they are everywhere. I guess the haters just don't have a life. Just remember, most of your followers like myself really appreciate your talent and teaching. God Bless!!