YOUR tank looks like mine😎my seat too resembles a lot. I shaved of my original seat post off.. And fabricated a tank on my frame (welded/unified). Awsome great work!
This is one of my favorite board track frames! I really like it nice job! I’m planning on building mine soon, I have one question though, I was going over the comments and saw you answered about oil but my question is how much oil you put inside and how do you check it through the plugs? Is there a certain way to check because when vertical, oil will not drip like when it is place flat horizontal like it’s supposed to be, so how you check? And how much oil? It has to be more than the recommended when in normal orientation right? I believe this is one of the nicest renditions of board track I ever seen! Thank you for sharing! 🙏🏼
Hi. Thank you. I use a level a little close to the crankshaft, and yes, it is more than the recommended when in normal orientation. Don't khow how correct it is, but have no problems with it. I consulted about it with a man who built btr replica with the same engine position, when i was building my bike. I check the level with a strip of cardboard.
О , соседи , а у меня старый круизер швиновский , думаю неспешно , как бы его моторизировать при оказии . Если будет необходимость в винтажных кожаных элементах для очередного проекта , пиши vk.com/andrzejleatherworkshop , ваяю порой занятности .
Кожаные элементы, в том числе на этот бордтрекер делал сам и еще у меня запас этой рыжей 2мм остался большой, но в дальнейшем натуральную больше покупать не буду, как-никак 4й год уже без мяса. Написал об этом кожевеннику, лол.))) Моторизированный Швин можно сделать под Whizzer.) У меня тоже есть круизер классический американский- Мюррей 96 года. Как нибудь сделаю видео с ним.
Outstanding build ! Thank you for sharing ! What is the sprocket ratio and the size of the wheels ? I am building the same type of bike but with 28" wheels and Honda 160 + same CVT as yours. Thank you for your help ! I really need your feedback on the rear sprocket. Is it 420 type ?
Sorry for not answering so long. Thank you! I have a 10t and 44t sprockets on this bike. 415 chain, i made a standard tav30 cvt sprocket thinner for this chain. 26'' heels, 42mm wide rims and 26x2.35 Scwalbe Fat Frank tires.
Very cool! I love how you did all the mods to the motor to make it look old. I plan on doing the same thing with my predator 670 based board track racer replica. the build is on my channel if you want to check it out.
Thanks! Many people have noted my aluminium valve cover, the making time was spent not in vain.) I checked your project, nice work with sheet metal. A gas tank shape is in Flying Merkel style. And i noticed the Fat Frank tires, like on my bike. These tires are very popular on motorized bicycles, and early style motorcycles.
Sad, but i didn't make photos or video of this process. At first I made model of valve cover with cardboard, then draw all parts in vector graphic programm (Corel Draw), and cut it with cnc from 2 and 6mm sheet aluminium, and put all parts together with four longer bolts to the head. Other bulding process i posted on my blog: petrograd-cycles.blogspot.com/
Спасибо! Здесь стоит вариатор с центробежным сцеплением (грузики соединенные пружинами расходятся на больший радиус внутри конической формы шкива и зажимают ремень, начиная от легкого увеличения оборотов). А колесо крутится потому что ремень совсем чуть-чуть цепляет ведомый шкив, это нормально для этого вариатора, можно остановить мизинцем, или поставить на колесо убрав стенд и байк будет стоять на месте.
Olá boa noite caro amigo Me da uma dica como farei uma bicicleta ou motocicleta como queira chamar é pq sou um amante destas relíquias, inclusive eu tenho um motor muito antigo 100% perfeito sem nem uma avaria e da certinho p uma motocicleta desta. Me responde se puder
What an outstanding looking build. Great looking Bike! Sounds great as well I am curious how you build, or where you found that Round Head Valve cover for the GX200 Clone engine?
Thanks! At first I made model of valve cover with cartboard, then draw it in vector graphic (Corel Draw), and cut it with cnc programm from 2 and 6mm sheet aluminium, and put all parts together with four longer bolts to head.
Thank you for the reply. Outstanding work. I was hoping it was something available commercially! I have a GX200 clone I would love to do that type of cosmetic treatment too. Great build man, just outstanding. Do you have any videos of driving it? I am willing to bet with that CVT, it moves quite well.
Sad but i have only first test-drive video: czcams.com/video/VrJWiYXLCb8/video.html Now i build a new project with 420cc clone, some go-kart racing mods and 40-series CVT, this is a chassis: czcams.com/video/x_GoUYiYwMA/video.html For more information look my blog with my bike projecs and concept arts: petrograd-cycles.blogspot.ru/
I was curious too where the Head Valve cover came from. It most of these builds the engine looks just wrong but your work on the Head Valve Cover nails it. Good job!
Thanx. No it is not a motorcycle engine, it is engine for universal use, like waterpumps, generators etc., but you can get more rpm and hp with simple modifications. Without gearbox, i built it with variable transmission (CVT).
Made it by myself. At first I made model of valve cover with cardboard, then draw all parts in vector graphic programm (Corel Draw), and cut it with cnc from 2 and 6mm sheet aluminium, and put all parts together with four longer bolts to the head.
That looks extremely good however look good is all it is I would put that up on a picture frame somewhere and admire it because there ain't no way my Clumsy ass to get on that thing that open flywheel with you my shin to nothing yes it would
It is standard Honda GX200 (clone) , with my modifications: vertical cylinder position, carb, exhaust, no governor, CVT, decorative aluminium vintage style valve cover.
Rims: Weinmann DHL-42 26". Tires: Schwalbe Fat Frank. Hubs: Front drum brake hub, rear- custom made with laser cut high flange with holes for rear sprocket and disc brake mount.
Thank you. It is standard Honda GX200 (clone) , with my modifications: vertical cylinder position, carb, exhaust, no governor, CVT, decorative aluminium vintage style valve cover.
It is standard Honda GX200 (clone) , with my modifications: vertical cylinder position, carb, exhaust, no governor, CVT, decorative aluminium vintage style valve cover.
+chris carpenter Hi, I start it from 1:1 frame blueprint, then i draw all sheet metal parts in a vector-graphic programm and made it with laser cut. Then i cut and bent tubes... You can find some photos of a building process in my blog: petrograd-cycles.blogspot.ru/ And you can look some builders like Sportsman flyer and Wolf creative customs.
Спасибо. Двигатель Champion G200HK (клон Хонды GX200) доработанный, снят ограницитель оборотов, другой карб, плюс вариатор итд. В начале видео кратко написано. Можешь еще почитать тут: bikepost.ru/blog/49570/Bordtreker-Petrograd-200.html Увидеть можно летом, в Питере.
Не подскажешь где можно найти различные технические решения и почитать о них ? Давно хочу собрать что-то наподобие ,но для того чтобы ездить постоянно ! И какой ресурс у таких движков ? 20000км будет ? Спасибо !!!
Ну в принципе, чтобы просто ездить этот мотор и в заводском виде сгодится, только нужен вариатор или просто центробежное сцепление (и то и другое на Ибэе продается) для GX200. Я применял некоторые модификации для картов, тк эти моторы в картинге широко используют и тюнинга на них навалом на том же ибэе, можно сил 20 снять с него со всем фаршем, но тут уж либо дурь выжимать, либо ресурс, как и с любым двигателем. Гугли инфу по запросам: GX200 (GX200 clone) bike, GX200 go kart mods gokartmods.com/gx200-modifications/ Еще посмотри работы мастерских Sportsman flyer и Wolf creative customs. sportsmanflyer.com/ facebook.com/WolfCreativeCustoms/ Ну и конечно Motorbicycling.com там масса подобных проектов с GX200 и клонами, в теме по 4тактным.
Спасибо !!!! огромное !!!! А, другие менее мощные двигатели не используются ? 100-ка допустим или 50-ка GX от Хонды ? Вопрос ещё в весе конструкции и отсутствии документов ? Для того чтобы можно было выезжать зарубеж и запихать его в чехол для велосипеда , дабы провезти в самолёте !?
I don't know, 10+?. Remowed governor, heavy duty valve springs, vm22 carb, but cast iron flywheel that dangerous in highest rpm. I need cnc aluminium flywheel, but stock flywheel looks more vintage.
nice bike just dont wear your bell bottoms on it or theyll be shredded in crank....stop pulling my leg....and if you decide to never ride it you could always use the pulleys to sharpen knives
Привет теска! Я в Москве в Великой России, ищу борд трекеры для овала, где буду организовывать гонки с ставками как на бегах лошадей. Как купить ваши Петрограды 200?
My new bike project: czcams.com/video/5AXCGWOt34s/video.html
YOUR tank looks like mine😎my seat too resembles a lot. I shaved of my original seat post off.. And fabricated a tank on my frame (welded/unified). Awsome great work!
WOW... LOST FOR WORDS. THE BEST I HAVE SEEN ON CZcams. AMAZING BUILD AND THANKS FOR SHARING.
Thanks!
had that exact same clutch / belt drive setup on a mini bike when i was a pup.
This Sound Like music to my ears, not any music, but the best of the best.Thanx for sharing this video.
Job well done, beautiful bike.
One of the best around "Well done"
john michael Knight 0pñ
Love this build
This is better than the one with the lawnmower engine!!
Damn, beautiful broo
This is one of my favorite board track frames! I really like it nice job! I’m planning on building mine soon, I have one question though, I was going over the comments and saw you answered about oil but my question is how much oil you put inside and how do you check it through the plugs? Is there a certain way to check because when vertical, oil will not drip like when it is place flat horizontal like it’s supposed to be, so how you check? And how much oil? It has to be more than the recommended when in normal orientation right? I believe this is one of the nicest renditions of board track I ever seen! Thank you for sharing! 🙏🏼
Hi. Thank you. I use a level a little close to the crankshaft, and yes, it is more than the recommended when in normal orientation. Don't khow how correct it is, but have no problems with it. I consulted about it with a man who built btr replica with the same engine position, when i was building my bike. I check the level with a strip of cardboard.
Beautiful!
Very impressive 😎
крутая работа ! Вроде видел сей байк в Коломягах давненько .
Спасибо.
Да, его среда обитания.)
О , соседи , а у меня старый круизер швиновский , думаю неспешно , как бы его моторизировать при оказии . Если будет необходимость в винтажных кожаных элементах для очередного проекта , пиши vk.com/andrzejleatherworkshop , ваяю порой занятности .
Кожаные элементы, в том числе на этот бордтрекер делал сам и еще у меня запас этой рыжей 2мм остался большой, но в дальнейшем натуральную больше покупать не буду, как-никак 4й год уже без мяса. Написал об этом кожевеннику, лол.)))
Моторизированный Швин можно сделать под Whizzer.)
У меня тоже есть круизер классический американский- Мюррей 96 года. Как нибудь сделаю видео с ним.
Outstanding build ! Thank you for sharing ! What is the sprocket ratio and the size of the wheels ? I am building the same type of bike but with 28" wheels and Honda 160 + same CVT as yours. Thank you for your help ! I really need your feedback on the rear sprocket. Is it 420 type ?
Sorry for not answering so long. Thank you!
I have a 10t and 44t sprockets on this bike. 415 chain, i made a standard tav30 cvt sprocket thinner for this chain. 26'' heels, 42mm wide rims and 26x2.35 Scwalbe Fat Frank tires.
Very cool! I love how you did all the mods to the motor to make it look old. I plan on doing the same thing with my predator 670 based board track racer replica. the build is on my channel if you want to check it out.
Thanks! Many people have noted my aluminium valve cover, the making time was spent not in vain.)
I checked your project, nice work with sheet metal. A gas tank shape is in Flying Merkel style. And i noticed the Fat Frank tires, like on my bike. These tires are very popular on motorized bicycles, and early style motorcycles.
Anton. J. Glad you like the build. I will be posting updated often. Do you have any pictures of videos of how you made the valve cover?
Sad, but i didn't make photos or video of this process.
At first I made model of valve cover with cardboard, then draw all parts in vector graphic programm (Corel Draw), and cut it with cnc from 2 and 6mm sheet aluminium, and put all parts together with four longer bolts to the head.
Other bulding process i posted on my blog: petrograd-cycles.blogspot.com/
Where do you buy that kind of motor. thanks
очень хорошая работа
The clutch and variator are from a moped ?
Очень красивый борд трекер. Мне интересно как устроено сцепление? Почему в начале видео заднее колесо не вращалось а потом начало?
Спасибо! Здесь стоит вариатор с центробежным сцеплением (грузики соединенные пружинами расходятся на больший радиус внутри конической формы шкива и зажимают ремень, начиная от легкого увеличения оборотов). А колесо крутится потому что ремень совсем чуть-чуть цепляет ведомый шкив, это нормально для этого вариатора, можно остановить мизинцем, или поставить на колесо убрав стенд и байк будет стоять на месте.
@@anton.j. Спасибо
The sexiest bike ever
Gosto muito de inventar bike e tenho algumas aqui na minha cidade.
Imperatriz_ma
Olá boa noite caro amigo Me da uma dica como farei uma bicicleta ou motocicleta como queira chamar é pq sou um amante destas relíquias, inclusive eu tenho um motor muito antigo 100% perfeito sem nem uma avaria e da certinho p uma motocicleta desta.
Me responde se puder
Were did you get the frame from? I cant get anyone to contact me. Its ultra frustrating. Any help would be appreaciated.
Hi. I built this frame, but not sell anything, it's just my hobby.
What an outstanding looking build. Great looking Bike! Sounds great as well
I am curious how you build, or where you found that Round Head Valve cover for the GX200 Clone engine?
Thanks!
At first I made model of valve cover with cartboard, then draw it in vector graphic (Corel Draw), and cut it with cnc programm from 2 and 6mm sheet aluminium, and put all parts together with four longer bolts to head.
Thank you for the reply. Outstanding work. I was hoping it was something available commercially! I have a GX200 clone I would love to do that type of cosmetic treatment too.
Great build man, just outstanding. Do you have any videos of driving it? I am willing to bet with that CVT, it moves quite well.
Sad but i have only first test-drive video: czcams.com/video/VrJWiYXLCb8/video.html
Now i build a new project with 420cc clone, some go-kart racing mods and 40-series CVT, this is a chassis: czcams.com/video/x_GoUYiYwMA/video.html
For more information look my blog with my bike projecs and concept arts: petrograd-cycles.blogspot.ru/
Thanks! I'll check it out
I was curious too where the Head Valve cover came from. It most of these builds the engine looks just wrong but your work on the Head Valve Cover nails it. Good job!
with mounting the motor like that, do you have any oil starvation problems?
No. After 3 years still runnin well. Just always check oil level, and I topped up if needed.
Anton. J. ok thank you
Onde eu compro motorizado para bicicleta moro em Tauá Ceará
Nice!
awesome build, honda clone engine, what is the engine out of, is it a motorcycle engine clone with a gearbox or an engine without a gearbox?
Thanx. No it is not a motorcycle engine, it is engine for universal use, like waterpumps, generators etc., but you can get more rpm and hp with simple modifications. Without gearbox, i built it with variable transmission (CVT).
Where did you get that valve cover?
Made it by myself. At first I made model of valve cover with cardboard, then draw all parts in vector graphic programm (Corel Draw), and cut it with cnc from 2 and 6mm sheet aluminium, and put all parts together with four longer bolts to the head.
Hmmmm where is the spark plug? Love the bike my favorite over all!
Thank you. 3:42 Look at the spark plug cable, front side of head.
That looks extremely good however look good is all it is I would put that up on a picture frame somewhere and admire it because there ain't no way my Clumsy ass to get on that thing that open flywheel with you my shin to nothing yes it would
Open flywheel is not a problem for me, i have a pair of good old WW1 german army half chaps.)
How did you get it to oil right with the cylinder in the vertical position
In practic no problem with it after 7 years. Many of bike projects with the same engines have a vertical ctlinder position.
@@anton.j. This is wonderful to know I may be able to get away from the use of the old flatheads i I do like my old flatheads
Can't be ridden?
Why is the rear wheel spinning if the clutch isn’t engaged?
It is normal for this CVT belt. Very slightly moving, you can stop the wheel with one finger.
You can't feel it when the wheel is on the ground.
Anton. J. Ah got you
Hi friend, can you tell me what the size of this rim is?
whether it is 26, 27.5 or 29"
Hi. It is 26'' Weinmann DHL-42 rims, with Schwalbe Fat Frank tyres.
@@anton.j. thank you friend
Where can I obtain that engine ? I could use one on a similar project like yours!
It is standard Honda GX200 (clone) , with my modifications: vertical cylinder position, carb, exhaust, no governor, CVT, decorative aluminium vintage style valve cover.
@@anton.j. ok! Thank you very much!
Where did you buy the engine?
It is Honda GX 200 clone, with my modifications.
Wich kind of wheels did you use?
Rims: Weinmann DHL-42 26".
Tires: Schwalbe Fat Frank.
Hubs: Front drum brake hub, rear- custom made with laser cut high flange with holes for rear sprocket and disc brake mount.
hermosa
What engine is that? Nice build btw.
Thank you. It is standard Honda GX200 (clone) , with my modifications: vertical cylinder position, carb, exhaust, no governor, CVT, decorative aluminium vintage style valve cover.
Did you buy the engine or make it?
It is standard Honda GX200 (clone) , with my modifications: vertical cylinder position, carb, exhaust, no governor, CVT, decorative aluminium vintage style valve cover.
New riding video: czcams.com/video/-6EE-YdSPTA/video.html
Make me one!
очень круто! ! !
Спасибо.)
Кстати ручки не планируется в цвет седла обтянуть?
Нет, на оригинальных бордтрекерах рули и ручки обматывали в основном черной летой на тканевой основе. Я использовал хоккейную для клюшек.
where did you get the engine from?
It is standard Honda GX200 (clone) , with my modifications.
And what cylinder head it that?
ronnie yazid It is just my custom aluminium valve cover in 20's engines style.
hi I want to do the same build but how do u start it
+chris carpenter Hi, I start it from 1:1 frame blueprint, then i draw all sheet metal parts in a vector-graphic programm and made it with laser cut. Then i cut and bent tubes... You can find some photos of a building process in my blog: petrograd-cycles.blogspot.ru/
And you can look some builders like Sportsman flyer and Wolf creative customs.
Thank you
Another question what about the pull start. So how would u start it then if you don't have it
+chris carpenter I always have a rope for it.
You could also just go to the Sportsman Flyer website and buy board track frame and engine install kit if you are new to building bikes.
fellow, what a beautiful bike... but 4+ minutes of only engine noise and nothing more? I was all the way waiting to see it rolling... just an idea.
Looks awesome but very hard to ride on balls for more the 20 mins I find anyway
Authenticity is more important than comfort.)
Is that a CVT ?
Yes.
Здорово !!! Что за двигатель ? Можно где нибудь посмотреть в живую ?!
Спасибо. Двигатель Champion G200HK (клон Хонды GX200) доработанный, снят ограницитель оборотов, другой карб, плюс вариатор итд. В начале видео кратко написано. Можешь еще почитать тут: bikepost.ru/blog/49570/Bordtreker-Petrograd-200.html
Увидеть можно летом, в Питере.
Ок, спасибо !!
Не подскажешь где можно найти различные технические решения и почитать о них ? Давно хочу собрать что-то наподобие ,но для того чтобы ездить постоянно ! И какой ресурс у таких движков ? 20000км будет ?
Спасибо !!!
Ну в принципе, чтобы просто ездить этот мотор и в заводском виде сгодится, только нужен вариатор или просто центробежное сцепление (и то и другое на Ибэе продается) для GX200. Я применял некоторые модификации для картов, тк эти моторы в картинге широко используют и тюнинга на них навалом на том же ибэе, можно сил 20 снять с него со всем фаршем, но тут уж либо дурь выжимать, либо ресурс, как и с любым двигателем.
Гугли инфу по запросам: GX200 (GX200 clone) bike, GX200 go kart mods gokartmods.com/gx200-modifications/
Еще посмотри работы мастерских Sportsman flyer и Wolf creative customs. sportsmanflyer.com/
facebook.com/WolfCreativeCustoms/
Ну и конечно Motorbicycling.com там масса подобных проектов с GX200 и клонами, в теме по 4тактным.
Спасибо !!!! огромное !!!! А, другие менее мощные двигатели не используются ? 100-ка допустим или 50-ка GX от Хонды ? Вопрос ещё в весе конструкции и отсутствии документов ? Для того чтобы можно было выезжать зарубеж и запихать его в чехол для велосипеда , дабы провезти в самолёте !?
how hp?
I don't know, 10+?. Remowed governor, heavy duty valve springs, vm22 carb, but cast iron flywheel that dangerous in highest rpm. I need cnc aluminium flywheel, but stock flywheel looks more vintage.
Lawn-mower engine so 2 hp at most. Can you not ride it..? You would cool the engine better if it was moving.
nice bike just dont wear your bell bottoms on it or theyll be shredded in crank....stop pulling my leg....and if you decide to never ride it you could always use the pulleys to sharpen knives
Thanks. Bell bottoms is not my style. I have a pair of good old WW1 german army leather gaiters/half chaps.)
Привет теска! Я в Москве в Великой России, ищу борд трекеры для овала, где буду организовывать гонки с ставками как на бегах лошадей. Как купить ваши Петрограды 200?
Привет. Он только один и был продан весной человеку который его продает сейчас.
tuck in your pant leg
gadibawa jalan sih gmn sih lu cupu
Well that sure was fucken boring