Mazda Miata MX-5 - Part 022 - Widebody Fiberglass Prep & Primer
Vložit
- čas přidán 5. 05. 2020
- Welcome back viewers. On part 022, I've already fixed most of the issue on the fiberglass. Sorry no video on that progress, many days involve into that process and I've haven't had time to film it. What you are watching is the final prep before I spray the primer on the panel. Enjoy !
FULL BUILT PROCESS : www.miataturbo.net/build-thre...
Please support the channel, buy our Merch here:
hyper-speed-media-2.creator-s...
OR..
You can, buy me a coffee. Thank you soooo much!
ko-fi.com/hyperspeedmedia
Follow me on IG :
/ hyperspeedmedia
Follow Midnite Runner on IG :
/ midniterunnermiata
Music :
Falls - "Kitt"
#fiberglass #fiberglassrepair #fiberglassprep #prepforpaint #widebody #progectG #ProjectGLA #widefender #overfenders #overrearquarter #miatawidebody #widebodymiata #basecoat #clearcoat #primer #2kprimer #bodyshop - Auta a dopravní prostředky
I love your front turn signal indicators. Do you have any information on how you did them? What leds did you use? Were they incorporated into the oem tsis? Are they just hooked up to the oem harness? What do you do about hyper blinking?
So you took all that time to ask 5 questions, but didn't give a like to video lol
I've made a few turn signal, if you referring to the one in the intro of the video then here : First, you have to open up the housing, install any LED of your choice. But, on the intro video, I use a COB leds with switchback. White LED for Daytime running lights, and Amber for turn signal. To solve hyper blinking problem, you can buy a Flasher module for leds, or modified your oem ones, as well as installing a load resistor, that choice is yours.
What is this rear fender?
ProjectG?
The front fender is Project G, and the rear bottom Flare is project G. The rear over fender is JP fiberCRAP. The fitment is very bad, I have to cut, trim, fiberglass, lots of work to make it fit right. I do NOT recommend them. Since I've already bought it. I had to make it to work.
Full Build Process on this website : www.miataturbo.net/build-threads-57/project-midnite-runner-miata-build-thread-101714/