Video není dostupné.
Omlouváme se.
अगर CNC टर्निंग मशीन का टरेट opposite Side मे दिया हो तो CNC के axis कैसे काम करेंगे आइये जानें
Vložit
- čas přidán 9. 05. 2024
- अगर CNC टर्निंग मशीन का टरेट opposite Side मे दिया हो तो CNC के axis कैसे काम करेंगे आइये जानें
#appositesideturretcncmachine
#operatorsideturrwtcncmachine
#turningmachine
#cnctirning
#2axiscncturningmachine
#allfunctionofcncmachinecontrolpanel
#cncprogrammingkaisesikhen
#cncgurumahendravermahindi
Aug 7, 2011
#1
Do you use right or left tooling in your turret lathe?
I use a combo of both.
It seems to me that for max rigidity, you'd want left handed tools. The workpiece is pushing the tool and turret down. Gravity already had the turret sitting on its ways, and that is the same direction the force is going.
When you run right-handed tools, the force is trying to lift the turret off of its ways.
My roughing tools are generally left-handed due to this logic. But, I may have the wrong idea. Do MTBs build the machine with right-handed tools in mind as primary/normal use goes?
I like my finishing tools to be right hand, as gravity helps the long stringy chips from getting tangled up.
B
Billiam
Aluminum
Aug 7, 2011
#2
I use RH tools. Turrets on modern machines are plenty rigid and should be able to take the force in any direction, especially if it uses preloaded ball/roller guides. Might as well keep the tools upside down, as intended by the MTBs for chip evacuation.
When rigidity is an issue, it's typically due to workpiece or tool flex. Tool orientation is the least of my worries.
S
screensnot
Hot Rolled
Aug 7, 2011
#3
I appreciate your response, Billiam.
During roughing, I don't have much trouble with chips, usually.
One thing I forgot was, LH tools give you a better view of the tool doing its job. If you can see anything past the coolant on your window (I'd love to have a spin windowYou can find on this page, Mechanical CNC Turret Punching Machine, Servo Motor CNC Turret Punching Machine, CNC Punch Laser Combination Machines, CNC turret punching machine is a kind of CNC machine tool. It is a high-precision and high-efficiency metal sheet punching and nibbling processing equipment controlled by CNC technology. It uses single punching cutting method, nibbling method and punching cutting method. Holes and parts of various shapes and sizes are punched out by methods such as nibbling, and it is especially suitable for multi-variety medium and small batch or single-piece plate punching.
good infiltration.
Thanks dear 💕
गुरु जी इस मशीन को बनाने वाले का दिमाग़ बहुत advance level का है
Ha ji
Good sir
Sir face grooving ka video banaye G01 code se
Ok dear