Bag Heat Sealer: How to Seal Plastic Bags & Poly Tubing
Vložit
- čas přidán 10. 09. 2024
- www.interplas....
After loading products in open top plastic bags or poly tubing then generally need to be sealed to for packaging, shipping, and storage. Hand impulse poly bag heat sealing machines impulse sealers are designed specifically for this reason. Manual impulse machine often are extremely handy when using poly tubing, where neither side is initially sealed.
References:
www.interplas....
www.aieco.com/...
www.interplas....
Best way of sneaking booze into a concert.
Hi 👋 where do you buy your plastic bags
Que empresa distribuye en Ecuador att. Fernando
Actually l have used clear vinyl. and the water leaked. l ll try the deep freeze bag....are they good for the job???
+TheRockerxx69 They could seal a Polyethylene bag NOT a PVC bag. Even if you get a good seal a water proof seal can not be guaranteed. We do sell leak proof bags but it still may not perform the way you may want them to. Water proof is a very difficult thing to achieve with a relatively cheap material. www.interplas.com/ziplock-bags/3-mil-bitran-liquid-tight-leakproof-bags
Where can i get the plastic?
www.interplas.com/plastic-bags-on-roll
Can I seal a hard plastic sheet over a remote camera control to make waterproof??? Will it keep what s the better plastic to be used and width ?
+TheRockerxx69 Yip it will work. The better plastic to use would be once again is LDPE as it is very flexible and stretchable. The thicker you go the more stiffer it will be. 30 microns would be good for what you are wanting to do.
+TheRockerxx69 I am not sure of your question. If you are asking whether or not the seal would be water proof... it would not. Especially on a "hard" plastic sheet. These sealers are only good for poly film up to 6 mils thick.
I got a machine. Doez it work for Mylar bags?
Yes, it does seal mylar. You can find the size you are needing on www.interplas.com/impulse-sealers
How did you get vac seal roll that narrow was size is the roll?
That is regular poly tubing and not Vacuum tubing. However, we do offer a number of widths and lengths in our Vacuum sealer bags if you are interested. Custom sizes may also be a possibility depending on the specifications you may need. www.interplas.com/vacuum-sealer-bags
Does that tubing come in a UV type so it could be out side???
+alphasxsignal We do not stock UV or UVI poly tubing. HOWEVER we will be glad to have a custom order run, but it would require a certain minimum of pounds of poly film to be run. Please be sure to call our sales department at 1-800-820-4722 for all the details. Thanks for asking. Great question!
thanks a lot
Can it be used for Poly Bubble Mailers. To make custom sizes?
That is a little bit of a tricky question. There are many variables at play with the type of plastic or film, the size of the bubble, and other factors that make it difficult to provide a complete answer in this format Andrew. We'd love to have a discussion with you about how we might be able to provide a solution to what you are after. Feel free to call us at 1-800-820-4722 or you can check out www.interplas.com/custom-poly-bubble-mailers. Thanks for the question it is a great one.
I want that plastic roll. Please tell me name and where to get it. I want 50 cm pouch . It is not available in market. So need to buy roll like this to make 50 cm pouch. Width is sufficient for me. Please tell me.
Krishna, while we don't have poly tubing that is 50 cm or 19.685 inches wide we do have 20" wide poly tubing available in various thicknesses. www.interplas.com/poly-tubing We do offer the ability to custom order poly tubing in any thickness, length, and width. www.interplas.com/custom-poly-tubing
@@InternationalPlastics I want 50 cm long , 4 inch width.
@@krishnareddy-sd5kr the nice thing with our tubing is that you can cut it to whichever length you wish. www.interplas.com/4in-2-mil-poly-tubing-on-roll-p-pt204
Prix combien
What type or brand is that dispenser?
Rahid R, Great question! That dispenser in the video is actually a converted portable shrink wrap dispenser being used for a roll of polyethylene. Please DO NOT use that dispenser for rolls of poly. Please consider an adequate poly tubing dispenser like these www.interplas.com/poly-tubing/poly-tubing-dispenser Polyethylene comes in much heavier rolls than shrink film.
How long does the element wire last? Should it be replaced often?
That is a fantastic question. There are many variables that come into play that would allow your question to be answered easily. Some factors that would need to be considered would be
• Thickness of film
• if the element has come into contact with ink on a bag
• How long the element stays heated in each use
• How many times the element has been engaged
We know that doesn't directly answer your question, but hopefully, it might give you an idea of what to consider. We do offer replacement kits and replacement elements should the need arise.
www.interplas.com/12in-element-wires-bag-impulse-thermal-sealer-p-smh300-e
www.interplas.com/12in-repairkit-bag-impulse-thermal-sealer-p-smh300-r
there are other sizes of elements and repair kits on www.interplas.com/impulse-sealers
how to order
Can I buy a bigger version that will seal bags 37 inches wide?
Dan Cox Plumbing,
Would like to say yes, no sweat. However, there isn't one on the market of that size, from any manufacturer or distributor. You may consider a handheld constant heat sealer with a roller. Try googleing "AIE-RS1 roller sealer".
They are quite tricky to master as they must be in constant motion without rolling it to fast or to slow for a decent seal. Not to mention if a straight seel is crucial, it is difficult to have that as well. Plus what is between the poly film being sealed and the surface the film / bag is laying on.
Depending on what you are trying to seal, have you considered heat shrink film? www.interplas.com/shrink-wrap
You may find it more helpful to give us a call and discuss what some possible solution might be, as it is difficult to provide a clear cut answer through communicating through youtube. Please call 1.800.820.4722 and you will speak to a real person immediately during regular business hours 8am-5pm EST. You may also email us at sales@interplas.com, but a phone call will get you the quickest response.
Wish I could have been more helpful in this response, as we pride ourselves on customer service. No matter the size of the business. Thanks for reaching out.
Ye times purchase Karna hai.
very nice tool, is it possible to buy the Lay Flat Poly Tubing on Rolls with print? and if so, do you have any price suggestions?
Yes it is possible. The pricing would depend on to many variables to cover in a simple explanation. Your best option is to call 1.800.820.4722 or email sales@interplas.com. You may also visit www.interplas.com/custom-poly-tubing to have a little better idea of options and to fill out a form that helps guide you with what you might need. Our customer service is second to none and calling us and speaking to one of our award winning reps will be your best option because we can give you a much better idea if what will work best for your application without you over buying and paying to much.
I want it can I be connected to you
Where can I get this to buy please
www.interplas.com/impulse-sealers
sir how to seal bag roll without cuting small pieces
That is certainly a possibility when using one of our sealers.
Hi There !!
Where can I get the Roll Dispenser. Thanks
+Dj Yuberth Great question! That dispenser in the video is actually a converted portable shrink wrap dispenser being used for a roll of polyethylene. What you would be looking for is a poly tubing dispenser like these www.interplas.com/poly-tubing/poly-tubing-dispenser Polyethylene comes in much heavier rolls than shrink film.
I need a tool that is going to make a kind of seal/separator line down the center of a piece of plastic, kinda separating it into 2 sides. Would this work? Kinda like you know how the baseball card protector sheets are, how they have the lines to separate each spot for a card? That's what i'm looking for.
+Jsunsetsky87 You can use any heat sealing machine. The bag he is using here is LDPE which is similar to the sleeve you would seal your card collectables. Now days you can get special card collecting sleeves... check EBAY it will be way cheaper.
+Jsunsetsky87 if you are looking to make "pockets" it could be done but you'd want to make sure you have some extra pieces of poly to experiment on since the type of sealer that is shown in this video makes a single straight seal the length of the sealer. If you are wanting to have a sealer that seals in a "dashed line" there is only one way I can think of that you might achieve that and that would be with a Hand Held Roller Constant Heat Sealer. We do not sell those at the moment. The rolling sealers are difficult to use in that you have to keep the sealer constantly moving or else you will put holes in the plastic film. If you move to fast then the film doesn't properly seal. Trying to seal both sides of the film is going to be even trickier. NOT that it can't be done. It will just present some challenges. Hope this helps you out. Post a video and let us know how it turned out!
How much available to delivery
Please refer to www.interplas.com/impulse-sealers for quantities and delivery options.
Can you give me the name of this plastic pls?
+Jashna Gujudhur its a LDPE Poly sleeve
+Ashna Gujudhur Polyethylene
Hello, Can this device sealed the Aluminum foil bags and if can what is the max. thickness which it can seal
Thanks for reaching out to us. We are a little unsure of which aluminum foil bags you are referring to. Can you be a little more specific?
Thank for fast answer. Please see, I want like this:
www.aliexpress.com/item/12-18cm-aluminium-foil-bag-heat-seal-packing-bag-food-bag/1670432911.html?spm=2114.13010208.99999999.277.4aWW8K
You are welcome. I am looking into it. Since you have contacted us through more of our social channel than a direct connection to a customer service representative, it will take a little longer to get a more knowledgeable answer than what I could tell you.
I am working on it and once I know the answer I will let you know. Your best option is to email sales@interplas.com or call us at 800.820.4722 when you have a detailed question, if you are needing a very fast response.
Please contact us through sales@interplas.com to get specifics on that answer and which one of our sealers we offer you want to order. www.interplas.com/impulse-sealers
I need this sealer
what cost is it?
Bikram Kumar Sahoo, that you for your question. Due to this video being for demonstration purposes only and not specifying the exact model of the sealer, a price is better found on our web page. That way you are able to find the most up to date pricing with the exact model you are needing. www.interplas.com/impulse-sealers
what mil thickness is the tubing in this video? thanks
+RealSoundNow looks like its a 40micron LDPE sleeve.
+RealSoundNow I am unsure of the thickness of this tubing but best guess would be 2 mil
what kind of heater is used?
Would you be so kind as to explain your question a little more? We are not sure if you are asking what type of heater in terms of the element ( www.interplas.com/8in-element-wires-bag-impulse-thermal-sealer-p-smh200-e ) that heats up and then seals the bag or if you are referring to something else.
This is very good machine can i buy this in india ? Because your site shows prices in dollars . . .
We are located in the United States. There certainly must be a company in India that sells Impulse Heat Sealers.
How much
I enjoy eating popcorn kernels.
I want that machine n that plastic
Where from i get this machine in Kolkata, pls address me
Nizam Uddin,
Doing a quick search of the internet, was able to find a possible supplier for you. It appears that this sealer supplier is located in Kolkata. www.indiamart.com/proddetail/plastic-impulse-sealer-14793102191.html
Kind regards.
can this be use for ice candy sealing
This suitable for sealing all polyethylene bags. However with cellophane bags you would want to use this sealer www.interplas.com/cellophane-bag-sealer-p-cesm01. Cello (abbreviation of Cellophane) are used predominately with food products that are not already packaged.
is it run in DC input?
yapp
12 dc
just make one at home
Harganya berapa ..??
Sir place price or packing
www.interplas.com/impulse-sealers
Price pls sir
Nuwan, please refer to www.interplas.com/impulse-sealers for an up-to-date product listing along with current pricing. Thank you for your request.
hello guy, we are no more in 2000 , put your video in 1080 p so we can see clearly everything
Wish we could. Thanks for the suggestion.
कस्ट कितनाहै यिस का
the impulse sealer comes in many different sizes and therefore it has different prices. www.interplas.com/impulse-sealers
I can see that you've got a lot of these machines at the back.
YES! We stock many many many bag sealers. www.interplas.com/impulse-sealers
I WANT TO BUY THESE SEALER GIVE ME THE PRICE
Your best option is to visit this page www.interplas.com/impulse-sealers and select the size and type of sealer you are needing. Hope this helps. Let us know if there is anything else we can help answer.
How I want this.price plz?
Please refer to this web page since there are a number of them to choose from with different options. Thank you for your interest. www.interplas.com/impulse-sealers
Hahaha no talk
can it be used for liquid packing
Rohit Jain, What a great question! It isn't necessarily a question of the sealer being able to seal a package that is holding liquid but more of the material that you are sealing. The short answer would be yes, BUT the seal would not be able to be guaranteed to keep a package from leaking. You may need to consider a laminated water proof package using a Lemo type sealer.
We do offer www.interplas.com/ziplock-bags/3-mil-bitran-liquid-tight-leakproof-bags