Replacing a bad tie rod end on 2006 Volvo V50, S40, C30, C70. P1 Platform
Vložit
- čas přidán 30. 07. 2023
- 2006 Volvo V50 T5 AWD with 65,000km / 40,000 miles.
Bad driver side outer tie rod end. Replacing both sides and performing alignment after fixes the knocking noise.
TRW - JTE1107 Left side Driver / Volvo 31201413
TRW - JTE 1106 Right side Passenger / Volvo 31201412
Thx to Minute Muffler Auto Service Centre for Alignment service. Well recommended
Address: 1011 Main St, Winnipeg, MB R2W 3P9
I don’t have a V50, but I owned a 2012 XC70 for 5.5 years that I just sold. Throughout my ownership, anytime I needed to perform any maintenance or repair, the first thing I did was visit your channel. Thanks for the hours of extremely useful content. You saved me a lot of time, sir. Thank you.
Excellent video, very well filmed and you explained things so that anyone can understand, I have to replace both the inner and outer tie rods on my Volvo C70II 2011, so this video has been helpful.
I have installed those TRW for my S40 in spring 2023 and purchased from FCP Euro. They are working great for such cheap price and guaranteed for life!
Thanks for filming these repairs. They're useful to watch, even when working on a car that's not the exact same model.
It is great you do all the repairs yourself. If you would go to a dealer these kind of relatively simple repairs would indeed cost a lot.
100%
Great video
Not even dealer another shops as well charge 700$
@@sandhusbythesea1122 My diesel filter has gone really really bad, i changed it for the first time, i needed to pump it by my self... i was curious and i called Volvo dealer garage. These thiefs asked me 320€.. i did it by my self for 42€- 25min of work. Filter cost me 22€ and handpump 20€
I love all your vids have helped me so much with my 2011 s80 T6 . Thank you !!
Thx!
Т6 супер мотор мой любимый которых уже нет и не будет
You’ve nicely torqued the nuts with a torque wrench… and the garage guys just did it with an airgun again 😂👍🏼
Wanna do it right? Do it yourself
well done!
Plz video for how to clean VVT sensors at S60/XC60 2011-2013
It may soon be the end of my 08 xc70😢😢. Despite undercoating, rust underneath. Small hole in quarter under neath under the edge of the plastic molding. Right underneath in front of rear tire behind the plastic molding. Rest of the underneath has a bit of rust too, but more so toward the back. Deciding what to do. Its at a 160k miles running great. 😢😢😢😢
👍
can I ask what type/brand of torque wrench you used? thanks
www.princessauto.com/en/3-8-in-dr-click-type-torque-wrench/product/PA0002920935
400 dollars? That is insane, i love Europe, this would have been 100 $ for both trw parts
Well it was less. 130$ for both tie rods and 180$ for alignment. All Canadian dollar.
@@volvosweden That must be a very good alignment, almost double the price of what I usually pay.
Then again, in Europe these parts are probably more easily accessible than in Canada. A set of the TRW tie rod ends costs 45 EUR, that's about 65 CAD.
did you say you took a cheap TRW off then put TRW back on ?
Are TWR-s bad now days? I bought (2019 june) TRW tie rods for my P2, still kicking @ 75000km / 46000 miles later.
No. Aftermarket unknown tie rod went bad.
@@volvosweden ah right sorry my mis understanding.