How to Repair Bad Sectors on Damaged Hard Drive Best HDD Repair Program (Easy Tutorial)
Vložit
- čas přidán 5. 09. 2024
- How to repair bad sectors on damaged hard drive best HDD repair program
Hi guys, here’s a best solution for bad sectors on damaged hard drives. Even if your computer does not boot due to bad sectors, you can try once. I hope this tutorial will definitely help to fix your problem.
Here’s some reasons, which can help to identify the actual reason behind formation of bad sectors.
Such as -
No.1 Generally bad sectors are formed mainly due to physical damage to the media surface.
No.2 Overtime usage may cause overheat to the device, which is another common reason behind formation of bad sectors.
No.3 Suddenly system termination due to power failure or power interruption while using HDD.
No.4 When your computer hard drive reads writes data to an incorrect location due to not organizing hard disk data for a long time.
No.5 A harmful virus can lead to the formation of bad HDD sectors.
And No.6 Header crash and ageing of HDD, this is another common reason behind developing bad HDD sectors.
Watch this video for detail information about how to repair bad sectors on a damaged hard drive.
💽“HDD Regenerator” Best HDD repair program
-------------------------------------------------------------------------------
Of course, let us know your opinion.
Please Like, Comment we need your support.
And guys please don't forget to Subscribe our channel ASA Technical.
Thank you.
My HDD works.. but moving documents to or from makes it crash almost 75% of the time.. some files cause it to do this and some don’t.. Will this fix it?
Note: You can't fix bad sectors but the OS will ignore the bad sector. A few is not an issue as HDD has spear sectors. If your HDD has bad sectors and the only way of fixing it is to replace the HDD.
The software they use is to force the OS to use the bad sector but it will go bad again. Buy a new HDD if you got too many bad sectors or if the bad sectors increase rapidly.
There is two types of bad sector, logical and physical. It will only help you to remove logical bad sectors. There is no such software to remove a physical bad sector. Physical bad sector remove means removing scratches from a disk which is impossible. So if it's said it recovered go with it. Because the other option of doing this is delete all partition and repartition and format drives, will give you same result. If it's a physical bad sector after restart if you check it will appear again.
What about weak sectors?
@@marshallcarter3282 a weak sector also know as a pending bad sector. Is a bad sector waiting or a rewrite or reread. It that succeed then there is no problem but it fails to rewrite then it will be remapped to a special space on the hard drive. And the sector that was weak will be ignore and will change to bad sector. Basically just backup all the time. Less to worry about. You could try overwriting the sector with zeros then see it fixes your weak sector.
It means that you had a problem reading or writing data to that sector and the HDD wants to confirm if it's a bad sector.
can this method be used to temporarily restore the bad sectors in order to recover the data in it ?
Usually if you have bad sectors on hdd you identify block, than do manual partition cut out. Some partitions will be with bad sectors some with good. Sadly you cannot combine them, and partitions sizes will wary. SDD if you get bad sectors - you cannot isolate them - you just use it for steam games not sensitive data like photos. If it gives lots of trouble and pain than just recycle...
This is exactly what I am looking. I have a 1 TB hard drive that was previously used as an internal drive for a HP laptop. After the machine had frequent but random BSODs, it was determined that the hard drive be replaced as it was failing. Indeed its a drive with issues but I realized it actually has a lot of good sectors (more good than bad). So how can I be able to separate the bad from the good so that now as an external drive, whenever I plug it in to a computer, the machine completely ignores the bad sectors and only read and write in the good sectors? How can I manually choose and partition off the bad sectors? Any suggestions will be appreciated.
@@joejoe3338
If you have like 10 bad sectors Use the program Victoria HDD and mark "fix" checker.
If your HDD was SCRATCHED and has more bad sectors then do the following:
Use the program Victoria HDD in read mode to test drive. Do not mark "fix" checker. Then you will find out the first and last bad sector. Like 11112222 first sector. And 22223333 last bad sector.
And you have max sectors count on the screen Like 99000000.
Then use calculator and calculate.
And create 3 partitions: good, bad, good.
The bad partition should be 1gb bigger than you counted it should be.
Than delete bad partition.
I'll give it a try though I've had too many disappointments repairing HDDs. This software is available from Hiren's Boot CD also.
You are a pro dude - showing how to fix without showing all screen to see the name of the software! Good job - fist software I think are most effective that is the reason why dont show us?
its Defraggler and the 2nd one is HDD Regenerator
Thank you for this, you sound so intelligence
Yea process karneke pahele keya mujhe HDD ko clean format karna parega?? Qki mere hdd main windows dala huya hain already..
Do this work even if my pc doesn't recognize thr external hard disk? i have a toshiba external hard disk which suddenly stopped working, the pc refuses to recognize it no matter what..if i plug it to the pc it doesn't allow me to open folders..i have very important data in it pls someone help me
You're a life saver dude 🙌🏼
Nice video and explains, but does it work for external hdd?
Yes.
Scan AFTER 5 MINUTES SHOWS HDD NOT READY IN RED COLOR BLINKING. PLEASE ADVISE
i have like 40 or 60 or 104 normal sectors but all the other are damaged will it work
Sir, can u make a video on Raw hard disk unexpected I/0 Error device problems ..?
Well done
Explained clearly 🤝
j'ai effectué aves chystal disk mon d.dur interne j'ai 2000 secteurs réalloués comment faire pour les enlever merci de me répondre
I'm getting a blank screen after changing the settings and starting the system
What if my laptop system GPT not MBR , how to bootable the flashdisk?
Sir my external hard drive has only shows icon but not shown inner data ...is your this method which I can try?
The case is head bad sector of detected on HDD regenerator very sure can to fix
Is it safe to use chkdsk option regularly say weekly?
what if it take longer time and want to terminate will my laptop be switched on
Hello can you help me out I have 1tb HDD and it health was 90% and now it is 8% because when I was formation the hard I unplugged the hard disk
It didn't repair my hdd and show a massage telling scsi interface hang out. Change setting to ide mode. Can you guide me about this?
Thanks you, sir. Now I’m following your structures. Hope it will be fine after that.
A tip: you can watch series on Flixzone. I've been using it for watching all kinds of movies recently.
@Graysen Gordon yea, have been watching on flixzone for since december myself :D
Good creative knowledge
Can I restore data after repairing the bad sectors.ichave too many bad sectors..☹️
As we all know, bad sector repairing damages data, thus you should backup or recover data beforehand. Some Programs provides data backup and data recovery features, thus you can back up important data and save lost data, such as clone damaged disk, create a sector-level image for disk / partition, recover data from RAW drive or unallocated disk, restore lost partitions, etc.
If bad logical can repair but you must backup data
If I use the HDD regenerator, does it format the drive? or my files will still be okay?
I have dell optplix 755 and after boot from the usb nothing happens
What to do?
Setting the BIOS
what if it did not scan, instead im getting error "if your SATA controller works in AHCI mode, change it to compatible IDE mode, which is set up to my bios, it doest let me scan the hard drive.
bro its so simple ig u messed up in bios settings . In your typical bios settings, in storage tab most prob ull have to go through some options until u see AHCP type optuion or AHCI i dont know exactly but yeah ull have to change it to IDE and it will fix
Does this work for SCSI drives?
My hdd is regenerating for an 36 hours is that normal?
When you try to use this don't forget to change bios boot setting ACHI mode to IDE and choose legacy then try it
It does not show "drive is not ready" message, if it shows after this settings changed, then hdd have more bad sectors damaged
Howsit bro
DRIVE IS NOT READY still showing for me
while starting pc it shows press F! key , repair, bad sector, and pressing F1 key but pc not start and when connected external mode hdd show format option ....so how to fix it sir
thank you so much
Can i use this on an external Hard drive?
Yes.
HDD regenerator shows your drive is not ready, plz guide me how to fix?
Scanning with hdd regenerator is stuck at some point. scanned 0.30% (2884mb) and stuck or too slow(0.03% im 6hrs) after that !!! 😢
please share your email id so that i can share screenshot
So sad
What to do if hard disk is not detected in bios. and cabls are ok.
I am having issue with drive is not ready!
I have changed sata from AHCI to IDE
My motherboard model GA-H81M-S2H
How can i fix that?
Do i need to use bootable flash drive for external HDD?
Good program am using same one as I speak I put on USB stick am going to burn this on disc
Can this hdd regenerator fix the badsectors on Linux formatted drives
Good effort you great
Error - Connect as internal USB.
I got same Hard drive and same laptop. My usb drive is not detected as bootable in bios
can this work in unrecognized damaged HDD???
I have the same issue bro.dont know what happened to my HDD.its not even formatting..I thinks mines gone
@@gouthamanguna7007
Put bad HDD in High end motherboard Z 370 and format
will it loss the data stored on that drive..
i m asking because my drive working good but showing one bad sector in drive C:/
If you can access the HDD data, backup first before running this program as it can cause the drive to become inaccessible. But yes it can repair that one bad sector in most cases. I've used this and HDAT2 for resurrecting drives for use or data recovery. If you have one or a couple bad sector run HDD Regenerator or HDAT2 2x on that drive. First to repair 2nd to see if that sector/s comes back bad.
I'm getting error like DRIVE IS NOT READY what should i do bro ?
can we use on external hdd?
Yes.
I have a seagate 8tb portable hdd which one is giving me trouble for last two days. I am trying to format it but it’s showing unable to format. I guess the hdd has bad sectors. I am using it for 40 days only in my Mac. Can you please give me a solution to fix this problem ?
Regards
Dew
Use f3t in my country make a recondition hdd
my usb is working fine but it says no usb flash drives found! what to do?
4 - Drive is not ready blinking.... In red color
Good tutorial
Is It Okay? BSector Found: 1942 RSector: 0 Repair mode 0.00% It's been a day since I scanned but he's still 0.00%.
My External Hdd Is 1TB
my one didnt repair but after scan i cannot set up windows
Is there any way to make it faster?
How does this works on a portable hard disk?
It shows DRIVE IS NOT READY, but scanning is going on. Will it repair the bad sectors? Or it's completely waste of time. Kindly, reply.
Me too,how to fix it?
Great work
DRIVE IS NOT READY showing for me
5:35 mine stops at 0.03% and says "DRIVE IS NOT READY!" in red. What do I do?
Same problem i have also the red flashing sign that says "DRIVE NOT READY
in my hdd getting many bad sectors and got message unable to continue "Hard disk seek" can help
Reset setting command
will you lose data by doing this ?
No, I did not face any data loss problem.
there is note :- drive is not ready why?
I have 8 error (blue) sector in my main HDD. is it safe to repair the main HDD which has c drive in it?
Yes. It just checks and repairs but not format your harddisk
Hi I tried using this software to fix, it started well, but at 6 % it stoped and started showing a message in red colour "6: Disk is not ready" and it didn't go further any help on this. Thanks in advance
Stopped it there and started regenerating the sector it's really slow and it's showing time left as 90 hours.
@@ganeshs1360 your hdd size ?
@@MrCHATTERJEE01 it's 931 Gb. It has data over 700 Gb
@@ganeshs1360 did you fix the problem ??
@@MrCHATTERJEE01 no it's still like that, disconnected it now. Tried many different methods and ran the system for 3 days straight, still didn't fix, instead more sectors started failing, that's when I admitted it's not going to work and quit.
Thank you
Welcome!
SIr I want To This Software Vaild Key Avail ? HOW TO CRACK THIS ?
mine stuck at 2% and it flashes red (drive is not ready) but it continues to find bad sectors
Mine too. But dosen't want to continue. It says "drive is not ready". What does it mean and how could i fix it? Tanks.
@@mobsize7 i think you have to change in bios something and make it to ide something like that i don't remember.but mine did not made my hdd any changes.still 4% health
@@lefteris.adamou.1 Mine got 30%. Thank you for advice. I 'll try to switch SATA to IDE in BIOS and try again. Maybe you should try that too.
@@mobsize7 oh.. yes that was what i was trying to tell u sata to ide.i forgat that because i stoped doing that since 3 mounths.i did this but after it comes up that my hdd has a broken sector and then i can hear that my hdd taps and the procress stops when it finds a broken sector.one time i made something with cmd with other hdd that had 5% and after restart it started the procres and i was going slow and then i left it doing that all night and when i woke up it said that there's no os on the hdd and i did restart and then it was booting until the win 7 animation and then blue screen.when i opened the hdd i saw that the actor head was off its place.i tried to stick it somehow with my hands without glue but it didn't work
sir 1 error 1. device is not ready
I got 1 bad sector but it's not going forward and it's a sentence "DRIVE IS NOT READY".
Break sector 339141....(165596)
Hard drive is not ready
Press space to exit.
Please help
Your HDD getting hot
It wont show the usb in bios
bro, i accidentally delete inside the software. now my hard disk show no media, and not detected please tell me what to do thanks
Data recovery software
Re install windows
Drive not ready 😕
yes same note showes on mine pc
Can i try this on ssd
Great video. Does this software work on SSDs?
Yes
Yes
why are you showing a hardrive repair tool that is 10 years old and inaccurate?
Im currently doing this now but it says 32 drive is not ready. Please help on what to do with this
It means yours drive or card has power failure
My Damaged HDD is not being detected by HDD Regenerator. Can you Please Help to restore my non detected HDD. THANKS
Try to switch off the drive, turn on computer and than switch the drive on and go to the "device menager" in control panel menu and go to the "scan for new drives".
সফটওয়্যার টার একটি কপি পাওয়া যাবে?
Our situation is worst, removed a dead hard drive from the laptop, connected it with SATA to USB converter, downloaded a software and the bad sector scan result so far its all damaged (red), windows disk mgt shows unallocated, need to initialize but it cannot be achieve due to I/O error. Is it a physical hardware damage?
Above 1000bad secter found is any solution.repair mode stop
Try to fix by using Regenerate all sectors in a range operation.
Whn I connect my hdd it get hang .. solution
Bad pysical
it comes that the drive is not ready
How to increase hidesk helth
Im doing this on a PS3 fat32 320gb but its taking far too long ....i'll try something else..
Yes is take long time because they regenerating all sector & low level format
@@vrinskeysandika987 is it normal that my hdd is regenerating for 36 hours?
Doesn't support USB drive
alhamdulilllah fine
Divce is not ready it shows is any solution sir
Same
I was doing this to my external Hard drive but unfortunately I chosed the "pre scan" option.. then for taking much time I intrupted that process.. right now when I chosed normal scan and follow your instructions then it is showing "master boot record of this hard drive is damaged"
Is there any way to revive it?
My precious research work is in it
download the hirens boot cd and fix the MBR then it will work inshaallah
Though i was working under windows process
Slow process when you ran on windows
dammit! My 1 lakh vintage laptop have gone to waste when ide hard drive don't even detected! what of kind local store would i even go to if i need an IDE Hard drive!
I think you can get a ide to sata adapter . ..that may work right away . ....but you might need to command the computer to run the new harddrive in ide mode
SOFTWARE NAME THIS ?
It says the process is terminated bcoz of limitation of demo version 🤧🥺
Download crack
This crack not available but you can find on DLC boot & hiren
@@vrinskeysandika987 thanks
@@stuff6585 sure
When I ran the Regenerate all bad sectors in a Range Hard disc got disconnected during the process. Afterward, the Hard disc stopped detecting. It is making more sound than before when I connect and Hard disc. I Have shown it to a local professional but he is not able to find the problem. Please Need your advice.
That means there is a physical problem with your drive, which cannot be repaired by only software. HDD sound means something is not right, either media is touching the body or head is scratching the media, if you know some one who can do this you can repair it, but remember if the head is scratching the media then there will be some permanent bad sector in your drive. So it's better if you replace the drive.
Bad fisik
Sir key ??
I have 4 bad sector i can use it
Definitely, you can try once.
@@asatechnical When I ran the Regenerate all bad sectors in a Range Hard disc got disconnected during the process. Afterward, the Hard disc stopped detecting. It is making more sound than before when I connect and Hard disc. I Have shown it to a local professional but he is not able to find the problem. Please Need your advice.
HDD is working normally but now speed decreases nearly 1mbps.
Writing speed is 1
Realy sir?
Format HDD
I did hdd is old and speed is slow format not work
Formated with cmd and also from boot menu but not worked
@@backbencher3689 - use Diskpart in cmd
Use low level format or regeneratif all sector on HDD regenerator
have to pay?
yeah and no, i mean it need money to really use it, but u can find way to avoid it on internet
plzz give me the fixing file
Try hiren or DLC boot