Thanks I was having trouble with the back of the chair, I tried and tired until I got tired and had to walk away for a while pulled up your video and when I saw you lay the back flat in the chair it made it so much better had no trouble at all, I have Parkinson's Disease and simple stuff like putting a chair together is now hard for me, You tube Videos like yours has helped me a lot, Even fixed my Clothes Dryer last week with a video saving me a lot of money and videos like your save me back pain, and a bad Parkinson Spell coming
Just tackled what seemed to be an easy job and feel like I've been in a fight. One recommendation I have for this is to avoid putting bolts in too tight. Secondly, you may have to put bolts in a different order than this video. The back rest and seat bolts are super tough to get in last. Hope this helps.
Thanks so much for the upload, this was extremely helpful my chair dint come with assembly insteuctions but with your help I was able to put it up no problem. So thank you.
Thanks. I have a slightly different chair but your video helped much. Smart to rest the back face down on the seat for the lower back screws. I used to struggle with that. Thanks again. :)
Vid helped a lot, although I am fighting with this backrest, trying to get it lifted up to put the bolts in the top holes. I am scared I'm going to strip something.
I've been trying to figure out how to insert the seat ontop of the button and I can't believe it's so complicated, it still hasn't gone in yet. I don't understand why it seems easy, but it's so hard, lol! I was able to easily install my other office chair in 15-20 minutes, but this one, I am not sure why I can't get it installed after trying for two days!!!
My mom & I are having the exact same problem. It's as if that top button of the air pump is too big to fit into the bottom of the chair! It shouldn't be a problem, but it's caused a lot of stress and just won't work no matter what we fiddle with.
We're able to get it aligned, but it's insanely wobbly and won't support anything, which are not qualities one wants in a chair-LOL. Is it supposed to be that way? But the instructions don't indicate to tighten anything following that step..?
The drawing (no instructions) that came with the chair is pretty useless for how to assemble the chair back; This was very helpful. I had given up after 1/2 hour of frustration. I will be calling GRUGA to complain.
Thank you so very much sir, your video is very helpful and easy to follow, no complications, I do appreciate your time and effort put in this video 🙏🙏🙏🙏.
Thanks so much for the video. I just got my chair and there were a couple of things (well, maybe 3 or 4) that weren't clear in the instruction leaflet, and the video really helped. Thanks again!
I like how you showed how to insert the 1st chair back screw with the seat back flat. The instructions were useless in showing this trick, and it's nearly impossible to assemble with the back sitting up as it does during use.
Thank you for the video, big help!!! What does it mean if when you sit in the chair it sinks all the way down and you cant rise or lower? I just got it and put it together so not sure why it is doing this. is this an issue with the hydraulic??
i did everything like this but my chair doesn’t move up or down.. i press the lever but the part of the gas lift it’s supposed to push down doesn’t move at all as if it was stuck , what do i do
i think cross-head bolts and phillips screwdriver would've been easier getting armrest on back cushion, this way i could've used a ratchet screwdriver and NOT those POS allen-head bolts and wrench.
I can't get the back seat to not lean forward when I lift it to attach the top screws. I did not tighten any screws, it just won't lift all the way sit up straight for me to tighten the top screws. Any idea's, help please.
I agree with Joe P. 8 of the 12 screws have heads that just slip through the holes in the arms. Now I either have to replace the screws, add washers or whatever. The quality control of this product is miserable. I strongly urge you to buiy from a different company.
just ordered this chair and the pre-drilled holes in the arms were too big for screws. I was sent a new one and same thing.... Belleze seems to be more of a garbage company than reputable furniture company
REALLY NOT IMPRESSED with the build quality on the Big and Tall Office Chair 500lb Wide Seat Desk Chair I bought. None on the bolts have a lock washer included, that means they will get loose and fall out & the screw mounts will break. For a few pennies more spent per chair on mass production, this chair could have lasted longer & have been a much better experience over it's life time. *Note to manufacturers: Make an assembly video specific to the particular model that you are selling. A general guide video like this is absolutely useless for a specific model assembly problem.
Thanks I was having trouble with the back of the chair, I tried and tired until I got tired and had to walk away for a while pulled up your video and when I saw you lay the back flat in the chair it made it so much better had no trouble at all, I have Parkinson's Disease and simple stuff like putting a chair together is now hard for me, You tube Videos like yours has helped me a lot, Even fixed my Clothes Dryer last week with a video saving me a lot of money and videos like your save me back pain, and a bad Parkinson Spell coming
Thank you! I assembled something for the first time in my life watching your video
Just tackled what seemed to be an easy job and feel like I've been in a fight. One recommendation I have for this is to avoid putting bolts in too tight. Secondly, you may have to put bolts in a different order than this video. The back rest and seat bolts are super tough to get in last. Hope this helps.
Thanks so much for the upload, this was extremely helpful my chair dint come with assembly insteuctions but with your help I was able to put it up no problem. So thank you.
Your video was extremely helpful. It made assembling my chair very easy. Thumbs up!
Thanks. I have a slightly different chair but your video helped much. Smart to rest the back face down on the seat for the lower back screws. I used to struggle with that. Thanks again. :)
Thank you to the guy that made this video i was about to give up on the 80 pounds i paid for my chair but its done now thank you
Vid helped a lot, although I am fighting with this backrest, trying to get it lifted up to put the bolts in the top holes. I am scared I'm going to strip something.
I've been trying to figure out how to insert the seat ontop of the button and I can't believe it's so complicated, it still hasn't gone in yet. I don't understand why it seems easy, but it's so hard, lol! I was able to easily install my other office chair in 15-20 minutes, but this one, I am not sure why I can't get it installed after trying for two days!!!
My mom & I are having the exact same problem. It's as if that top button of the air pump is too big to fit into the bottom of the chair! It shouldn't be a problem, but it's caused a lot of stress and just won't work no matter what we fiddle with.
We're able to get it aligned, but it's insanely wobbly and won't support anything, which are not qualities one wants in a chair-LOL. Is it supposed to be that way? But the instructions don't indicate to tighten anything following that step..?
I’m an assembly technician and I am having trouble building this stupid chair.
The drawing (no instructions) that came with the chair is pretty useless for how to assemble the chair back; This was very helpful. I had given up after 1/2 hour of frustration. I will be calling GRUGA to complain.
Thank you so very much sir, your video is very helpful and easy to follow, no complications, I do appreciate your time and effort put in this video 🙏🙏🙏🙏.
So grateful for the upload of this video thank you very very much it was so helpful.
Thanks so much for the video. I just got my chair and there were a couple of things (well, maybe 3 or 4) that weren't clear in the instruction leaflet, and the video really helped. Thanks again!
You got an instruction leaflet? I didn't.
Thank you, I have a Sauder Leather Manager Chair same parts.
I like how you showed how to insert the 1st chair back screw with the seat back flat. The instructions were useless in showing this trick, and it's nearly impossible to assemble with the back sitting up as it does during use.
at least you got instructions. I just received my chair today and absultely no instructions !! Thank you to the poster for uploading this
This helped me! Thank you! 🙏🏻
Luffy It’s great- still comfy, sturdy and looks good as new. 😁
Luffy you’re welcome 😊
Thank you for the video
Thank you for the video, big help!!! What does it mean if when you sit in the chair it sinks all the way down and you cant rise or lower? I just got it and put it together so not sure why it is doing this. is this an issue with the hydraulic??
Did u figure out what was wrong mine is the same way
Thank you so much you were a BIG help
i did everything like this but my chair doesn’t move up or down.. i press the lever but the part of the gas lift it’s supposed to push down doesn’t move at all as if it was stuck , what do i do
Thanks, very helpful.
What size is that Allen wrench? I need to re-tighten mine and the ones I have are too big or too small. TIA to anyone who may know the answer!
Thank you!!!!
Great instructions thank you.
Ok. Which screws go with which holes. Shouldnt have to guess
Thanks man!! PERFECT Quick instruction!!!
Kewl music 🤙🏽
i think cross-head bolts and phillips screwdriver would've been easier getting armrest on back cushion, this way i could've used a ratchet screwdriver and NOT those POS allen-head bolts and wrench.
Beautiful instructor
My wheels not going in if I pit one other falls off..does it need to be fixed please help what should I do
how the heck do you get the wheels in???
You push down hard until you hear them click into place.
brute force. i looked up this video because i couldn't figure out how the wheels went in
You need a man to snap the wheels on.
I’m an assembly technician I found that if you jiggle the wheel that will help it go in.
It was tricky and took many attempts but you must apply pressure downwards until you hear a click.
What size screws is it to put on the arms?
I am an assembly technician and I am having trouble building this chair!
How do I dissemble the bottom part
Thank you
I can't get the back seat to not lean forward when I lift it to attach the top screws. I did not tighten any screws, it just won't lift all the way sit up straight for me to tighten the top screws. Any idea's, help please.
You have the bottom seat backwards lol
I agree with Joe P. 8 of the 12 screws have heads that just slip through the holes in the arms. Now I either have to replace the screws, add washers or whatever. The quality control of this product is miserable. I strongly urge you to buiy from a different company.
lovingia1 I feel like I’m falling forward in this chair, it is miserable. Agree
Easy to follow :)
just ordered this chair and the pre-drilled holes in the arms were too big for screws. I was sent a new one and same thing.... Belleze seems to be more of a garbage company than reputable furniture company
Thanks
Those buttons was a pain in the ass to put in. My thumbs feel broken.
@Luffy well it's as if I just got it. But, I'd rather a gaming chair if you know what I mean😂
Why not tighten all the way?
If you tighten too much, it leaves no wiggle room for the other screws which most times turns into having to start over
REALLY NOT IMPRESSED with the build quality on the Big and Tall Office Chair 500lb Wide Seat Desk Chair I bought. None on the bolts have a lock washer included, that means they will get loose and fall out & the screw mounts will break. For a few pennies more spent per chair on mass production, this chair could have lasted longer & have been a much better experience over it's life time.
*Note to manufacturers: Make an assembly video specific to the particular model that you are selling. A general guide video like this is absolutely useless for a specific model assembly problem.
This is my chair feels like I’m falling out .
You have the bottom backwards
I wonder if the 'no instructions' is so that people will pay $80 for assembly...shame on them !
Junk
Useless
Do not buy this chair. I wish I never purchased it. Think about how bad a company has to be to bot include instructions
tytyty
Thank you!!!!
Thanks
Thanks