DIY Pocket Bike in 24h
Vložit
- čas přidán 25. 08. 2024
- I was bored! All my other projects end up dragging so I decided to build a pocket bike and give me a time limit and concentrate on the most important parts. A pocket bike is basically a mini electric motorcycle. This one even has a dual drive which makes it not only more expensive than needed but also insanely quick. I still didn't find out the top speed. Unfortunately I didn't have enough time to brakes. Keep it safe peepz, I'm a lunatic.
Here some details about the bike: It consists of two 1000W 48V BLDC motors. Two VESC-like controllers. 4x6S 6.2Ah LiPo two batteries in series for each motor.
Here some links to the parts (affiliate links):
1000W Hub Motor: aliexpress.bit...
Tires: aliexpress.bit...
Speed controller: aliexpress.bit...
Charger: ebay.bitluni.n...
6S LiPo Batteries:
- Ebay: ebay.bitluni.n...
- Aliexpress: aliexpress.bit...
Throttle ($1.29 lol): aliexpress.bit...
My camera and lens (4k 60fps): amazon.bitluni...
plz share :-)
Github Sponsors: github.com/spo...
Patreon: / bitluni
Channel membership: / @bitluni
Paypal: paypal.me/bitluni
Twitter: @bitluni
reddit: u/bitluni
Discord: / discord
#electric #motorcycle #diy
What music is playing at the end?
Looping Ascent - Joel Cummins
I'm glad you asked. I spent ours to re-cut the ending to match this track. I just discovered it in the YT Music Library and it gave me instant goosebumps so I had to swap it. Must be a new addition since I'm browsing the lib quite rigorously.
Fun fact: there are three different cuts of this video (unlisted) with different music at the end
@@bitluni just checked, it's from February 2022 :)
@@bitluni ah you made the right choice with the new music 😄
@@bitluni The other music tracks in the video are also very nice!
Darude - Sandstorm
A true Luni ... wobbling drills, top notch welding, machinists skills like from another galaxy ... and the final call: SHIP IT!
SHIP IT!
true freedom is going 40 km/h in an electric pocket bike hastily made in 24 hours, it looks so fun
The interesting part is that the record I hit was going uphill at 42km/h. I didn't feel compfy going faster with only the jeans as protective gear. But what is interesting that the acceleration really starts at around 20km/h
Any idea of torque produced by the motors?
I love the fact you included sleep in the 24hrs. It turns it from some fanciful youtube "24hours challenge" to an achievable and captivating story of trial and tribulation.
Awesome project :D That thing is a bloody death trap, I love it
Even though I might appear like a desk jockey I'm actually trained in several extreme sports.. so don't try home unless you are equipped :-D
Lovely video. Great editing, storytelling, and a cool build to boot. Well done sir.
3:44 Klingt wie "Gudde Nacht" 😂
As a welder I am impressed On how awful your welds are 😂😂😂😂😊
What a wild ride!
beautiful country.
cool project
That is the same feeling I got when I made my first go-kart. Just straight thrill and excitement. Not to mention the pure joy of successfully building something I can ride.
Rock and roll my guy
I need one of those....
put a smile on my face :)
That's some This old Tony welding right there
🤣🤣🤣 TOT probably cringes right now
the sleeping in the middle is great. made it real
I gotta build my own!!
there is a low brake wire on some of those basic controler...
Omg I love it
Danke!
Hey Bitluni, du hast mal ein Projekt mit Beamern angekündigt, steht das noch?
es wird passieren. ich arbeite noch am use case. die platine geht gut
@@bitluni Cool, ich freu mich schon :)
But... There was no cushion! What about the balls?!
whipped cream
I best your Search history looks something like how to operate a TIG welder instead of how to weld with a Welder😂😂
Cool project
For a close to 24h build. GOOD JOB !
stunning content quality !
Proof you don’t need fixtures or a jig to build frames. Don’t obsess over tools and just start building! Great video!
That will do, that will do...
Can you please add a command to clean display in your esp32 VGA out library. As it will be very useful for displaying moving data on screen.
You deserve a like a subscribe for risking your health like that for us
Crazy guy!
Put BMX pegs on the front wheel/stem! Will let you relax the legs when cruising. :D
Besides being informative I found this to be very entertaining :) Thanks for sharing.
German Engineering at its peak
*Quality*
Pocket bike?
More like rocket bike! 👍
Any idea of sustainable motor torque?
How much would it cost to make one excluding tools.
This video is an actual art piece ! The editing was trully amazing !
Some fine German engineering that. ;) Looks like fun! :D
Such a good vibe! DIY, creativity and fun!
6:27 Timmy! haha
love you duuude!
Give this man a week and i cant imagine what he cud do
What wheels are those
My floor has those marks😂
The only word that continuously comes to mind is..... Goober
Hollywood < Scrayzor
ja was fürne geile Produktion
Loving the subliminal messaging in this one!
but can it fit inside a pocket?
Arbusa Productions did the same 3 years ago 😁
Somehow you look like waluigi riding that bike
Whose pockets does that bike fit in? :)
Our government - considering what's left of my paycheck.
Absolutely brilliant lol. If given a few additional hours to fit basic brakes and a way to put your feet on as well, it would be a perfect pocket bike haha
Too bad its illegal in Germany.. looks like fun!
Leider, hätte es gerne mal auf einer befestigten Straße getestet. Vlt mal auf ner Rennstrecke mit Schutzkleidung
great cintent my dood, as per usual. i'm strapped in for the ride, geilstes zeug uaf youtube, mach einfach dein ding und wir schauns es!!!!
Awesome video! You couldn't pay me to ride that thing though!
what we all need to know: How has Luni solved the wrong turning drill bit situation?
thee was no time to fix the chuck. I needed to hand drill that 5mm steel. drilling steel with that makita is haunting me
Share this video so my mans can get PPE!
Brilliant work as always. Would love to take it for a spin!
Unfortunately here in NL its possibly even more illegal than there.
Oh yeah, amazing and really funny video, I was missing this kind of crazy videos. Really funny 😅. I also listen a couple of seconds of Cuban music 🥁🎷🎺
This video is edited so differently than your other videos. Different editor, or just limitations from the reduced amount of footage compared to your usual projects?
it is an experiment to improve on my bad retention rate. That's one extreme. I'll probably end up in between
@@bitluni I do hope so. I'm not interested in more "junk food" videos which require no commitment and don't provide much substance.
I've subscribed on Patreon to show my support for the longer videos. Your 30% retention loss is not from people who care about your work.
@@Phoen1x883 Thanks for the support! That experiment seem to have failed so far.. it's a bummer since I quite often struggle to reach people with projects I like the most.
i want it but i just need brakes
Sehr geil 😎👍
what metal did you use and where did you get it?
Cute
i always suspected primosz roglic was motordoping
very subtle 😂
I hope we still have the 10 fingered luni we all know and love. well maybe not the love bit ;-)
There is a reason I didn't get a band saw a table circular saw
so sick cool
I missed your Luni projects. Love your videos.
Thats 24 hours of insanity Luni... I always love your work, concept and humorous you include, Please make 2nd version of this one ☝️. Also keep making and uploading videos. ❤️Love from big Fan of yours.
Love that I am not the only one working on the ground. So recognisable. 😁
Where are the, "NEIN! Das ist NICHT TÜV Zertifiziert, und darf NICHT auf Straßen verwendet werden!!" comments? Oh yeah right, mostly international audience :P
i'm waiting for the uncensored version...
one esc per motor right?
unfortunately yes. I didn't know they doubled in price. I think the bike would also work fine with only one motor
@@bitluni actually my question was a sanity check question just to make sure that there is no way to wire-up 2 motors to 1 esc.
the price of the esc isn't a deal-breaker though it doesn't look fair to surpass the price of a 1kw motor with the tire..
my ultimate question is: has anyone created a elegant DIY scooter that he uses everyday? the hardest part to create is the chassis. who is the target group for those parts? creating a chassis on top of the electronics looks a bit too much for a hobbyist. are those parts intended for modifying a retail scooter?
Wouuuuuuuuuuuuuuuuuuuuuuuuuuu😮😮😮
I built an electric pocket bike that would do 37kph on flat ground with a 127kg rider. Battery life was 4.8km.
You win on the loadbearing. I'd love to take a cruise with you. unfortunately, I'm in Ger
@@bitluni It was converted from a terrible gas powered bike. I don't remember if I still have it, but it ran a 1HP 36v PMDC motor. I still have a Razor pocket bike with the 24v motor and mountain bike disc brake I added to the rear wheel.
Great video, epic fun at the end.
keren banget pak luni....saya senang sekali melihat video2 anda...mantap 👍👍👍
Die Idee ist super. Hatte meinen Kindern aus eins gebaut allerdings mit bremse. Ein E-Dreirad diy gabs auch noch dazu. Sind die Highlights wenn die Nachbarskinder vorbeikommen.
die motoren sind auf jeden Fall für scheibenbremsen ausgelegt
This is awesome, I want one!
Embrace the sparks, they only hurt for a second or two ;) cool bike.
Hello I'm NOTORUS IRBY IN NEWARK NEW JERSEY I HOPE THAT YOU MAKE THE FINISHING TUCH OF THE POCKET BIKE PUT BRAKE ON IT AND SOME PEDDLE TO PUT YOUR FEET ON SO PLEASE MAKE SECOND VIDEO ON THIS I WILL LIKE TO SEE YOU RIDE THIS POCKET BIKE WITH EVERY THING ON IT THANK 👍👍
amazing, I'd love to see it more...refine.
You scream like a girl... But EPIC project!!!
I like you bro
I am not that capable to support you on Patreon or in any other manner but know that you inspired me since 2019, when i started watching your LED wall version one.
I would like you to givs us an occasion to ask you many questions on which we are curious about you,via different platforms like Twitter and have the time to answer them on your youtube,😊
@@jontech_Lab he live streams every week on his second channel!
czcams.com/channels/8rQKO2XhPnvhnyV1eALa6g.html
@@bitluni thanks bitluni
Just how illegal is it, in Germany? Because it’s very very illegal in the UK. Like anything fun.
it's not on public roads. hence testing on private parking space and that bumpy field
@@bitluni Oh but do you own the field?! Because if you don't, you're breaking the LAW! CAN'T DRIVE UNREGISTERED AND UNINSURED VEHICLES ON PUBLIC LAND M'KAYYYY?! (I'm being facetious obviously)
"Stop right there, criminal scum! Nobody breaks the law on *my* watch!"
6:06 🤣
Why do we man laugh if we salvage items for another project XD
Nice project - but you should at least wear a helmet when testing such a crazy vehicle.
So Good Considering 1 Day Work 😍
With the vesc, is it possible to limit the top speed? Seeing as some EU countries have strict rules about top speed.
I would have accepted being blinded instead of using a spider infested welding helmet
I swear it was full of nests and I was trying to get rid of the araneus that was crawling towards me. Otherwise I'd try to get a better shot
@@bitluni xD this is pure gold
Oh those wires dragging at the end, diy vasectomy is not all its cracked up to be.
TÜV sagt nein :D nice job tho
Lets not show that to the TÜV.
Seems to work pretty well though with that much power
Alles Privatgelände 😬
с таким же успехом можно было трубу вилки а задницу вставить и ездить с таким же комфортом.....
nice! needs brake & helmet
my hair was so greasy after the 24h I counted as a helmet
Now I wanna see abs breaking system for the bike
I'll follow up with regen brakes waiting for the handle to arrive
@@bitluni gr8