PCX 160 MUFFLER FOR CLICK 160. Will it fit? (MT8 Racing Exhaust)
Vložit
- čas přidán 28. 01. 2023
- In today's video, we will try to fit a MT8 Racing Exhaust for a PCX 160 into our Click 160. We'll see if there will be fitment issues and performance issues.
LAZADA LINK: www.lazada.com.ph/products/mt...
#PCX160 #Click160 #MT8Racing
FIND ME AT:
FB: / marc.lawrence.ph.fb
IG: / marclawrenceph - Sport
Lazada link: tinyurl.com/ymwd4p2d
Update: The engine was burning lean after a few kilometers, even after the ECU reset. You'll need to have a ECU remap to correct the AFR after installing this muffler or else your MC's engine will burn hotter than normal.
@mohammedtomawis8733 hindi pa paps. Wala pang budget. Hehehe!
@mohammedtomawis8733 balik stock muna. Wala pa budet pang paremap.
Alam ko po kahit stock pipe, lean po talaga ang AFR ni click 160
@@harleyjustimbaste7031 yes. Masmagle-lean after ng aftermarket na pipe.
Yown. Ayos yan sir mac
yown sa wakas
Nice! Saktong bassy sound! Hindi bulahaw.
Very nice idol.
Noice papa
Congrats, bro!
-skgb nga pala
Thank you, bro! 🙏😊
@3:35 olats advice mo!kinokompromiso mo pa safety ng iba. Instead na grasa, epoxy gasket maker linalagay dyan to seal the metal gasket!
Sir lahat ng pcx pipe pasok kay click160?
Bomba responsibly mga paps! Lezgo!! 😁
I am installing the Dame exhaust as you on my Click 160. Did you have to do any remapping to get the best performance? Thank You
ECU remapping is the best route to get the best result. My ECU was reset after exhaust installation but still got super lean after 5,000+ km. SP tip was super white.
@@MarcLawrencePH Ya I went to the latest Honda dealership in Bohol and they couldn't do. Thanks for answering me back
@@davidkaiser810 you'll need to bring it to a reputable tuner. Be careful because there are tuners that claim to be legit. Price is usually a good indicator. A cheap tune usually results in poor performance. It can be a hit or miss. Legit tuners take time to tune your ECU and charge from 2k to 3k.
@@MarcLawrencePH Good information this helps a lot
So PCX160 exhaust set fits Click 160 without any modification needed ? 😉 Looking to get Yoshimura if yes and sell my Vamos 😁
Should fit. My MT8 is specifically for PCX160. Just needed to extend the bracket of the O2 sensor.
sir.. update po sa reset ng ecu... no need na po ba remap pag nag change ng pipe
May update ako sa latest video ko. Kailangan ng remap. Naglean sa akin kahit nareset ang ecu.
Ok ba yan sa LTO ? Di ba nahuhuli ?
boss all stock yon mga pang gilid mo pati engine? puwede po ba yon all stock tapos papalit muffler?
Yup. All stock engine at pang gilid. ECU reset lang ginawa.
Hi Sir baka pwedemalaman san ka po nakascore ng flatseat mo and yang mt8 pipe hehe thank u
Flat seat sa Shopee. Type mo lang Vario seat. Sa Lazada naman yung RCB. Sa official store nila doon.
di ba ma cocompromise yung CBS paps pag nag big disc brake? salamat sa sagot, plano magpalit big disc
Nope. Gumagana pa din.
@@MarcLawrencePH additional question po. Okay lang ba mag 325/330mm sa rear suspension na di na binabawasan ang front? Sabi di daw advisable yung pinapa lower ang front. Salaamt ulit sa sagot boss ride safe always 😇
@@andreyamoroso9795 naka 330 mm yung sa akin. Di na ako nag adjust sa harap gawa ng 10 mm lang naman ang binaba sa likod. Ayos naman. Pati yung tutok ng ilaw di masyadong nagbago.
May kasize po ba ang pipe ng click 160 na pipe? Tulad po ng pcx 160
Pang PCX 160 yang pipe ko. Sinabi ko sa video.
ecu reset lang ba kelangan gawin paps and no need na remap? tapos pasok ba sa rquired decibels ng lto mt8 natin paps?
Yup, reset lang ginawa sa akin. So far so good naman. Hindi pa naman ako nasisita abt sa db level.
@@MarcLawrencePH may tutorial ka ba for manual reset ng ecu?
Boss, update naman sa pipe, hindi po ba nag ka usok? TYIA
Binalik ko sa stock dahil sobrang lean. Kailangan ng remap.
May tutorial ka ba on manual reset ng ecu?
Walang saysay ang reset, kelangan remap talaga para sa AFR nya.
@@imfeelingluckypunk492 oo dn, nagrereset ako ecu wala dn kwenta naglelean unh sparkplug
pra san po ung sensor na un
O2 sensor. Yan yung gamit ng ECU para alam ng ECU kung anong value kukuhanin sa map. Para tama yung bato ng gasolina sa makina ng motor.
ano po pasok na seatcover na may tahi sa click 160?
wala kasi ako mahanap na may tahi pang click 160
Alam ko may sizes yun. Try mo yung mga large.
Idol pwede po ba sa lto yan?
Hindi pa naman ako nasisita. Kahit sa checkpoint hindi napapansin.
Pasok kaya yan sa adv 160 sir?
Possible since pareho halos makina ng mga 160 na modelo.
Same lang ba paps ung jvt pipe na pang pcx sa click 160 natin?
Not sure.
@@MarcLawrencePH nagparemap kana paps?
@@arielcariaga5057 hindi pa. May update ako diyan, soon.
@@MarcLawrencePH pwede ba paps reset ecu na lang kahit hindi na remap?
@@arielcariaga5057 kakaPMS ko lang for 10,00p km. Naglean yung sa akin kahit na reset ecu. Tinignan kasi namin yung sunog ng SP.
San mo nabili upuan ni click 160 mo pupz
Shopee paps. Search mo "Vario seat".
@@MarcLawrencePH pa send link ni shoppe boss
Sir Idol kasya po ba ang click 125/150 sa 160?
Yung MT8 muffler? Iba sukat ng 125/150. Pang PCX160 dapat. Modify mo lang konti yung bracket ng sensor.
@@MarcLawrencePH sir yung muffler ng mga pcx 160 sir, kasya po ba sa click 160?? Wla kc bumebenta ng muffler for click 160.
@@reynielbalenciaga8722 yes. Pang PCX160 ang gamit ko dito sa video. Kailangan mo lang iextend yung bracket ng sensor. Pinaliwanag ko yan mabuti sa video. Andyan na lahat ng details kung ano ang gagawin.
@@MarcLawrencePH thank you sir idol
Hm Po ung mt8 sir?
2.4k - 2.5k depende sa shop.
Hindi ba sakal boss
Nope. Maganda flow. Sa sobrang ganda ng flow, nag-lean. Kailangan ng remap. LOL!