Solar Panel Wiring vs Volts and Amps
Vložit
- čas přidán 13. 06. 2020
- The amps and volts of a solar panel array can be affected by how the individual solar panels are wired together. This video is going to teach you how the wiring of a solar panel array affects it's voltage and amperage. The key takeaway to know is that 'Solar Panels in Series Adds their volts together' and 'Solar Panels wired in Parallel adds their amps together.'
Blog Post: www.explorist.life/how-series...
How to Wire Solar Panels in Series: • How to Wire Solar Pane...
How to Wire Solar Panels in Parallel: • How to Wire Solar Pane...
How to Wire Solar Panels in Series-Parallel: • How to Wire Solar Pane... - Auta a dopravní prostředky
Finally someone explaining not just the maths, but why you’d do it. I’ve been looking for this info for a while. Great job.
The quiz was great. I failed before your presentation, and passed after. I appreciate the work you put into the videos and the quiz.
Glad it helped!
Clearest video on the internet about this, clearer than the Will Prowse guy. Thank you
🙂👍
As one that has taught and instructed, having a interactive portion is a fantastic way of developing an understanding.
Keep up the great work.
Cheers Scott
How could it still be confusing after the amazingly great way you’ve taught this. The combination of your succinct and accurate words alongside visuals was the best I’ve seen yet. Thanks for all the time you put to this.
Awesome! Glad it helped. Thanks for watching!
@@EXPLORISTlife I'm going to watch all your videos, then work out a plan. If I post my plan here would you tell me if I'm right or wrong ?? Thank you
How are amps determined?
These are incredibly helpful videos brother! Thank you for sharing your knowledge.
I had my panels in parallel. Changing them into series-parallel really increased the amps into the batteries. My voltage into the charge controller was too low. Increasing the volts increased my amps. Thanks a ton for these very useful videos!
Gosh it's my first time trying to figure it out it's so confusing I don't think I'm ever going to be able to figure it out and I need to so bad they cut my power off and I'm trying to figure out how to make this work
I don’t often subscribe to channels but I found yours to be some of the best diy solar around. Thanks!
This is EXACTLY the video and information I've been looking for!!! THANK YOU!!
Oh my! I’ve had sooo much trouble wrapping my mind around this! Thanks so much for the simple video. I learned so much in 10 minutes!
Awesome! Glad it helped. Thanks for watching!
Me too. I need all the help I can get with this.
Sending a link to my professor at university , hope he learns how to teach like this! Clear diagrams, relaxed attitude and passionate about the topic . Inspiring . You can learn a lot from fellas like this chap .
Thank you - great informative video series. Maybe discuss the affect of the sun shading when hits the panels in "series" vs. "parallel" and then vs. "series/parallel" setups?
Series together with MPPT will often be the ultimate winner
This series is fantastic! Some of the info you cover I already knew well, but I still fully enjoy watching. Even if you don't plan on doing any of this stuff yourself, if you own a solar system, you owe it to yourself to watch this series so you can at least understand what is going on with it.
Great job Nate! Kudos!
No problem. Happy to help!
@@EXPLORISTlife is 80volts dc 15watts more energy than 20volts dc 15watts?
@@EXPLORISTlife hello could you help me with the wiring of my pv array
@@boomblastjeno5226 For sure! That's what this video teaches you. Or perhaps you should just choose from the arrays we've already designed.
Ok I have six 270watt 24v panels voc is 38.55v the lsc is 9.10 vmp is 31.47v the lmp is 8.58a max system voltage 1000vdc max system fuse is 15a my inverter is a mppt 5000w 48v the max pv array is 145vdc could you please send me a diagram of how to wire these panels the proper way please thank you
Thank you! GREAT explanation video. Much appreciated.
Thanks heaps for making this series currently fitting out a 2015 VW transporter with no prior knowledge and have found your videos really helpful.
Awesome.... the clarification and how you slowly break things down into parts, which then allow folks to truly comprehend the information, to then apply it, is wonderful..
No problem. Happy to help!
Outstanding informational video Again! I reviewed this video 4 months ago, but it didn't sink in until I actually had the solar panels set up. I am humbled by your knowledge and help.
Just keep watching again and again.
After about a year you will start understand enough to at least ask questions
I'm all thumbs when it comes to electric work, but your videos are so good that I feel ok to try doing it myself.
Your videos are helpful. You helping a old man to be able solar up his Class A motorhome. I never want to old to learn. Thank You
excellent video, extremely informative! thank you explorist
Hey sw explorer, Thanks so much! Cheers!
Very important info, Loved it ✌️🇺🇸☮️🗽
This video really helped, seems so simple now. Basically add series that then run in parallel so the amps arent wildly high. Really helpful
This is the BEST explanation on CZcams that I've found so far to know which charge controller to buy. Thank you.
Hey Jay'man, No problem! Glad it helped! :)
I love ur way of explaining the dif panel configurations my question is when looking at the back of my 4 240w 37.2v panels i see 4 dif amp ratings im trying to figure out witch amp rating to go by 1. Maximum Power Current 7.89amps 2. Short Circuit Current 8.73amps 3.Maximum Serious Fuse 15amps 4. Minimum Bypass Diode 15amps when wiring witch amp rating u referring to ? thanks
240 ÷by 37.2 equals one of the numbers in the panel
What about a 3 way y split?
I was hoping you would address the function of the MPPT charge controller in how it coverts the surplus Volts into Amps and what the math is or how efficient the conversion is. Also, how the panels function when one panel is in shade and how that effects the output in V and A in Series vs Parallel.
Those are coming up in their own specific video. Stay tuned. :)
@@EXPLORISTlife, I am very interested in this as well. No one has covered this info that I have found. Any update on the time frame for the video? Thanks so much
@@EXPLORISTlife
I hope u also cover the difference in theory & practice of series/parallel...
ie. Parallel = higher current = more losses (so less efficient)
(& more expensive charge controller)
also fatter wire = higher cost..!
U should have mentioned it in this video as well...
Otherwise it's the best I've seen on this topic...
Thanks Nate! I enjoy your you repeat the info (I.e. V times A equals W) each time you go through a schematic. This helps me memorize!
Awesome! Glad it helped. Thanks for watching!
The best most concisely explained example on CZcams. Thank you so much, as this is exactly what I have been looking for.
Awesome! Glad it helped. Thanks for watching!
Great videos. Which configuration would charge a battery fastest? For example, does wiring it with higher voltage but less amps result in slower charging due to lower amps, or does the higher voltage increase the speed of charging?
Basis what I have, connecting in series would charge the battery quick than connecting the panels in parallel, but make sure the your mppt is capable of handling
It depends on your pv charge controller (pwm vs mppt)
The only confusing thing about all of this is which one is best to charge your batteries? When living in the van, you’re using amps, and concerned with how many AH your bank has. Do you want to push the most amps into the battery, or the most volts into the battery? Nobody bothers to tell you which is actually preferred or which will charge your batteries to full faster. Could you please cover this?!
Howmuch power is pushed in the battery does not depend on the series or parallel configuration. Higher voltage (more in series) means lower Amps for fhe same total power, thus smaller gauge wires, but more expensive charge controllers as he explains. You can calculate the amount of current into the battery by the power of the solar array (as you saw in this video all configurations with 4 panels had 400W) by rhe nominal battery voltage. Cheers!
With series and mppt combo you get the max output of your panels with the added benefit of smaller wires. Higher voltage systems give you more of a return on investment. In my opinion.
@@enki2gold Higher volts could kill
@@mas-udal-hassan9277 absolutely
@matthewjswider You want more Amps for charging! You only want your volts to be slightly higher than the battery you’re charging! If you have a 12v battery, you want a max of 13-14volts and between 3-40amps for charging, 3amp is slow charge, 10 amps is fast charge, and 40amps is rapid charge. Since most solar panels produce between 12-24volts, the charge controller sorts out the power differences and turns it into 13-14volts for charging. The closer you can get your solar panels to naturally putting out 14v and 10amps the less work your charge controller has to do and more efficient your system is
You are a teacher, you have the imagination to understand what the uninitiated don't understand, and take them through it. Some of the very big names in this field don't have that imagination - so thank you! Now off to try and find the quizzes you have kindly made for us, so thank you once again. If anyone is going to lead me through this maze, I suspect it's you!
Your are incredibly helpful and this is by far the best video out there I've researched for helping to understand how to not only connect panels but in the best way. I'm about to put together my 6 panels to my bluetti and I'm actually excited because I have much more confidence now from your very clear tutorials. Thank you so much!!!
This is a great video! Your way of explaining the way(s) to wire the panels is by far the best I have seen! You explained the methods very very clearly. Thank you so much for making this outstanding video!
Awesome! Glad it helped. Thanks for watching!
This is easily the best explanation I’ve seen to date on amps and volts for connecting solar panels. Wish I watched this before I bought four 200 watt panels with each panel running 12 amps into a Ecoflow delta max that can only handle 10 amps. Thanks!
Awesome! Glad it helped. 🙂👍
Just got a solar generator and some solar panels and started an education process beyond flipping on a light switch or jump-starting a car. Found your videos, and you have really brought me out of the shadows in using this system for emergency use. You have a very simple way of bringing a lesson that can be followed and understood. Keep up the good work...yes I did subscribe.
Awesome! Glad it helped. Thanks for watching!
Finally! Someone that explains things clearly and concisely. Subscribed!
Awesome, thanks! Welcome aboard!
OMG!
You made everything so understandable and your wiring diagrams made it so easy to follow. I have gone to several sites and, while they were quite knowledgeable you made it so understandable. You are a great teacher. Thank you.
Hey, thanks so much! Cheers!
Holy hell...this may be the most informative watts/amps/volts video I've ever seen. I'm in the process of getting solar panels setup on my backyard shed and this video helped so much at understanding the wiring.
Awesome! Glad it helped. Thanks for watching!
CZcams suggested this video. Since I have solar panel arrays and a few solar generators, I watched it. You did a wonderful job explain series/parallel hooks up. Showing the Ohm's law math will help people internalize this concept. Thumbs up and like.
Love the instructions and ease of understanding your video provides
I have to say - as someone who didn't "get" electricity as an A-Level student (40 years ago!)... this particular video explains this topic really well! The best explanation I've seen so far! Brilliant! Thank you for explaining this so well! :-)
Awesome! Glad it helped. Thanks for watching!
I have never seen a CZcams video with so many thousands of like so zero dislikes; that folks tells you something of the quality and clarity of this vlogger.
Hey Luc Delhaize, Thanks so much! Cheers!
@EXPLORISTLIFE…I hope you’ll put each of these into a playlist folder so I can find and watch all of them easier.
@@SalmonKing52 You can create your own playlist in your YT library and choose exactly what vids you want in it
This is awesome video. I just got a pair of panels to play with and trying to figure out how to wire. Thanks for the awesome explanation! :)
What a great, clear easy-to-understand explanation! You have natural ability as a teacher.
Oh, I'll watch again before I take the quiz! Thanks!
Hey Tchiarito, Thanks so much! Cheers!
This is super useful stuff, thank you very much for posting this. You just got a new subscriber ;) I am pretty sure I'm gonna watch this a few more times until it's sinking in. Keep this type of content coming!
Hey, super Neuro divergent brain here. I was super confused at first on how to calculate your volts and amps when wiring in both parallel and series at the same time.
But I realized that it’s a lot more simple than you explained it, or at least, that’s how it seems to me. Essentially, you just take the volts and amps of one singular solar panel times the number of sections that you have.
It doesn’t matter how many panels are in each section. It only matters how many sections you have. If you have 6 sections, you times the Amps and volts by 6, if you have 4, you times each of them by 4
This is such a great resource video! I finally have a full grasp how volts and amps can be adjusted for different needs ... and I passed your test, too! You just helped me overcome one of my biggest hurdles... Thank you!
Thank you so much for your great explanation. Thank you for sharing you time and knowledge. 🙏💪
Awesome Nate, I think I can do it. I’m going to enjoy upgrading my current solar system on my 4wd and camper trailer… drawing what I’ve got while watching your videos helps make clearer what I need to do.
Wow I'm glad I hung around at least to listen to that you know I wasn't fully paying attention but I was letting it go on in the background to try to absorb as a supplementary video. I didn't know that anybody really spent the time to answer each and every question but I want to take you at your face that you do. That's kind of refreshing to have somebody actually go up and flat out say that you answer each and every question on occasion and I can't do that forever but either way that's admirable thank you I appreciate that. Id consult with you, even pay. But I don't want to waste your time, there are lost causes lol
Wicked dude. Really enjoyed the quiz too, genuinely ironed me out!
You sir are without a doubt the best solar teacher on the net
Awesome! Glad it helped. Thanks for watching!
Thanks . You explain so well. Love your series.
Best Regards Martin
Well done! I'm glad I found your channel. I will be watching the rest of your videos.
Glad it was helpful. Cheers!
I love the way you explain things. I understood every concept you laid out. You have a real talent for this kind of stuff. A great way to break things down and uncomplicate them. Thank you, your going to save me time and money!! =)
I appreciate that!
Thank you so much, this is by far the best video about solar panels I ever watch
really thank you so much, you made me finally understand it 🙏🙏🙏
Great series Nate! Thanks!
Great series! I started from learning what was a lug 😂!
Thanks a lot for all your videos . You have broken it down in a simple way that everyone can understand. One love
Awesome! Glad it helped. Thanks for watching!
You're a star! New to this, and I've learnt everything I wanted to learn in a few minutes. Will now follow you. Thank you very much!
Glad it was helpful!
👍 Danke fürs Hochladen!
#👍 Thanks for uploading!
Dude thank you so much for these examples. Specifically the price comparison and the 6 panels setup as that’s exactly what I’m doing and I bought the 150/60 controller, but have time to return it and save money with the less expensive controller!! Thanks again!
Also it doesn’t show on the diagram but do I need a fuse for this setup? Thanks again!!
Thank you! This finally made things clear! I have all the parts for a small but expandable system but have been afraid to hook it up. Damaging that expensive charge controller was my fear. 100/50 like you showed. Now, the next chance I get, I have the knowledge to install the system correctly. Thank you again!
Thanks for explaining this in simple way. I won't forget it now
Happy to help!
Thank you very much out of all of do CZcams channels I watch on solar you are probably the best one and I love your little test
Thankyou . This cleared up a lot. Im building a off grid house system 240 volt . In Idaho so i want to use the most panel as possible for the bad days of solar.
Glad it was helpful. Cheers!
This is the best solar channel I have found.. Now I know how to maximize my victron 100/50 mppt.. Running 400 watts of solar to it nowbut about to add 600 watts more to it.. Thanks so much..
Thanks! :) Keep in mind that the "50" part of the 100/50 is referring to the charge controller OUTPUT amps. Not the input amps. 1000 amps pushed into a 12V battery bank will be somewhere in the 83 amps range; so the 100/50 will be a bit underpowered for that many watts.
EXPLORIST life - DIY Campers thanks i had that mixed up.. So it looks as if i can only hook up 700 watts of panels into it. Can You run 2 charge controllers on one 8 battery 12 v bank or would it be better to split the bank and controllers and have 2 separate solar arrays? thanks
Just knowing what you've described, I'd recommend 2 charge controllers if they array warrants it feeding 1 battery bank.
EXPLORIST life - DIY Campers thanks so much you are awesome..👍🏻🌞🌞🌎
Your a brilliant teacher, I actually learned a lot from you. Thank you👍👍👍
Hey Parmorama, No problem! Glad it helped! :)
This was such a good helpful video it will make a big difference on the project I'm on! Thanks for sharing!
This series is totally saving my beginner butt thank you soooomuch!
Hey Buddy. I love the videos. Detailed explanations and you answer what viewers are going to ask lol. Your pace of talking is almost as calming as the BBC Planet Earth guy too lol. I did want to mention that I've tried your super helpful charge controller calculator. Thank you for creating it! I don't know if you have an amazon affiliate link for the recommended item, but no matter which item the calculator recommends the link seems to go to the same 75v/10A controller. Cheers
Ahh... the vendor changed up their product page. The link USED to go a page with all of the charge controllers on one page. I'll make an adjustment. Thanks for the heads up.
Super helpful, thank you!! Your video was much more useful than any of the other sources I was able to find!
Glad it was helpful!
I'm just discovering this channel and it is so informative. So helpful. Thank you 👍🏼⭐
Awesome! Glad it's helpful. Thanks for watching!
Just started watching...and as an engineer (definitely not electrical eng) you rock. this helps so so much.
Glad it was helpful. Cheers!
Great video, best I have seen on the subject. Thanks Nate.
Awesome! Glad it helped. Thanks for watching!
Thank you for taking the time to help us.
Hey David Hayes, No problem! Glad it helped! :)
Hi there all the way from South Africa🇿🇦 love your videos
This is what the world needs a no bull full explanation fantastic vids
Awesome! Glad it helped. Thanks for watching!
Totally appreciated the quiz thanks for the info !
Awesome! Glad it helped. Thanks for watching!
Love it. This series is making the difference in my installation. thanks!!
Great to hear!
Quiz was very helpful, took it before and after I watched the video - 50% before and 100% after.
That's awesome! Glad it was helpful!
Thanks brother!! The wiring diagram will help explain a lot of my questions!!!
Glad it was helpful. Cheers!
Dude, the light bulb finally went off for me after watching this. Thank you.
Well done !Informative .
I really liked how you explained this, but I have just learned that there is a schematic to the panels which includes max. power, max. volts, short circuit current and open circuit voltage. When you were giving your diagram at the begging, which are you using. My 100 watt panels don’t have the same numbers that you used and I understand that can be important. None of my numbers were whole numbers and the multiplication didn’t work. Thank you!!
Fully informative and helpful video , thank you for sharing this series with us.
Awesome! Glad it helped. Thanks for watching!
Very well explained, clear and concise. Thank you sir.
Awesome! Glad it helped. Thanks for watching!
Excellent Videos, very helpful ! Thank you!
No problem. Happy to help!
Dude, your doing a great job. Your a good teacher. thanks for the videos!
Hey, Artatexture! I appreciate that. Thanks for watching! 🙂😀
Thanks so much for all the work on this one!
Hey Gentleman's Journey, No problem! Glad it helped! :)
Thanks so much for spelling it out in a way I could get to grips with it... makes so much sense now.. cheers mate
Glad it was helpful. Cheers!
You're a good teacher. I scored 100%!
Your piece is very informative 🙌🙌🙌
Many Thanks for your teaching!
Glad it was helpful! Cheers!
great information. Many thanks
Thank you so much for sharing this great knowledge! I saw it as an ample opportunity I wouldn't toy with
Wow. Perfect explanation. Thanks.
Hey BTC ain't crashing, No problem! Glad it helped! :)
YOU ARE SO HELPFUL!!! BLESS YOU NATE
Awesome! Glad it helped. Thanks for watching!
Yo bro, thank you for sharing your expertise with us. I plan on building my own system for a van in a couple months. I am going to try to digest all of this excellent information.
Thsnks
Rick
Hey R O, No problem! Glad it helped! :)
This is such a great resource, Thank you!
Awesome! Glad it helped. Thanks for watching!