24 Can Am Defender JL Audio Roof unlocked and tuned
Vložit
- čas přidán 24. 08. 2024
- HUGE difference once you unlock this Radio and tune the JL Audio 280/4 amp. The video does not do justice to how much better it sounds. Also, standing outside of it you can hear the bass that’s clear in person. However, in the video you can mainly only hear rattling/distortion that’s not clear. If you have any questions feel free to ask or feel free to leave a suggestion.
Please subscribe for future videos!!
Thank you for this video. I fixed a customer issue with this unlock tip.
Glad I could help!!
I’m glad you posted this video, I took possession of my 24 lonestar cab around Christmas and was very disappointed with the audio.
One other thing I did see, is a JL 500x4 amp will fit very nicely behind the rear seats, you can use that to hook up to your rear speakers and a mild sub under the seat.
I will have to make a video once I install my setup. I purchased 2 rockford 12'' subs for under the rear seat. I'm dding two more 7.7's in roof and then powering them with two JL 600W/3 amps. I'm running 1 sub, 1 new 7.7, and the other 7.7 thats power by the headunit only on each amp. I.m hoping to have it all installed by end of month, just starting to sound deadening this week. Thanks for watching, please subscribe if you get a chance!
@@bjmmotorco, did you run your rca wires down yet?
When I select FM hit play and then hold day/night I only get the display settings screen
Make a video explaining how you run wires for sub
@@johndsundayme too how did you fix this
thank you
When I try to unlock by pressing the day/night button the only thing that pops up is the day or night icon to select. Please help!
@@LifeofJbird make sure to go to FM radio, then hit the play button before the day/night button
@@bjmmotorco yep I did that..I skipped that step and still adjusted the amp…I will try it again but for some reason it would not work for me.
My 24 defender jl audio amp has no access to the amp controls...just holes where the set knobs should be!
@@b.c.7799it should show the controls on the back cover, the. You remove the screw on the backplate and they’re are underneath it
@bjmmotorco mine was the last 24 ordered from my oklahoma dealer, the plate is there, but unmarked...then once removed there is a rubber water seal, and behind that is where the controls have been removed...the holes are stamped out but the typical gain, hz, lpf, hpf etc has been removed...I was super pissed off lol...all that time trying not to lose the damn screws, nuts and tiny bolts
@@b.c.7799 that’s wild man, never heard of that. Those little screws will make you go cross eyed and are a pain not to drop! lol
What sub envlosure did you end up with???
It’s from Wetbox. Chris Finch is the guys name if you look him up on Facebook. Great quality and finish box! I’m about to post another video with updated full system installed
what does unlocking the head unit do?
Allows for more control and volume
What did you adjust head unit to
Default MM50@@zachelliott9355
Has to be unlocked as well to run RCA outputs for the subwoofer.
But how do you shut the dumb ass speaker led's off. At night they give a bad reflection
May be a power button on and off on the Light Mesh app. I will have to try it
I can hear your led are doing the same as mine in my Lonestar it’s like there’s a buzzing from the led lights goes off when I shut them off ??
What percent tint are you running?
20% on all 35% on windshield