If You Use SNAPSHOTS, You NEED To Know This!! | Snapshot Bypass Control (Line 6 Helix/HX Stomp)
Vložit
- čas přidán 1. 08. 2024
- #line6 #line6helix #line6hxstomp
Line 6 Marketplace Presets: bit.ly/line6marketplace-sadites
Tonex Tone Models: bit.ly/tonexpresets
ToneNet Profile: bit.ly/3JosdwY
IK Multimedia Amplitube 5: bit.ly/3y02IfR
IK Multimedia Tonex: bit.ly/3Srb0pc
7% Off Your First Year Subscription: distrokid.com/vip/sadites
T-Shirts & Merch: bit.ly/2sWXLCm
Paypal: bit.ly/2sYbUiM
Patreon: bit.ly/2B7aBmf
Facebook Music: bit.ly/2SgbGlr
Website: bit.ly/2WwEEwy
Join this channel to get access to perks:
/ @jasonsadites
After my recent video about the new snapshot parameter feature added in firmware 3.50, I received a LOT of questions regarding the ability to control the bypass state of FX blocks independent for snapshots. We have actually had that ability for some time now and it seems a lot of folks are not aware of it. This will also solve the issue of having a block engaged on all snapshots when we add a new block. I really hope you fins this video helpful!
As always, thanks so much for watching...
Please visit my sponsors:
Line 6: www.line6.com
Vigier Guitars: www.vigierguitars.com
Mission Engineering: www.missionengineering.com
Morningstar FX: www.morningstarfx.com
Temple Audio: www.templeaudio.com - Hudba
Nobody deep dives the Helix better, Jason. Thanks, as always.
THANK YOU! For years I've struggled with that "one more block" idea after I thought I was finished setting up my snapshots and it was always a pain to go through every snapshot and make sure the state of the block was correct.
I was one of those Users who didn't know what this feature was or what I could use it for. Now, it helps make Effects Blocks behave on the physical Unit like a real pedal would behave on a real Pedalboard. That is, only being engaged when I actually press it, and not being engaged when I simply switch Snapshots. Awesomely useful "hidden gem!" Thanks
Amongst all the most important videos that you shooted (90% of them are labelled "important" ones 😁) this one is as to me the most usefull and ... thus ... ahem... important. so tanks a lot ... I was quite à bit used to save one by one each of my snapshot everytime I simply added any Block... game changer ...
Line 6 Helix was the best purchase decision I've ever made in my whole entire life.
Especially with the 3.5 update.
Only paid 1 grand for mine and now that 1 grand device is on par with its higher end competitions that cost like 1.5 grand or over 2 grand in terms of sound, even though it took some time for it to get here.
Usability, possibilities, Helix always was ahead of its competition so no complaint there either.
for sure
Thank you Jason ! Your help on so many issues are so appreciated by Soooooo many !! Thank you Jason !!
Great job JS clearing up all the confusion on that feature. Great tool to be able to do what you want to do with your patches. Keep it up with these hidden gems
Thank you, Jason. That feature is really really useful to me.
ANOTHER Great and very informative video! Thanks Jason! I have used this feature since Line 6 introduced Command Center to set up Snapshots alongside Stompbox assignments in Stompbox mode! Imagine my disappointment that I still could not have that control if I wanted that Stompbox in a certain state on a particular Snapshot... until 3.50! WooHoo! Now I can have the parameter I want set without being affected by Snapshots - which is really what I had wanted all along!
Seriously, you're the man! Thank you
Excellent vid! Another problem solved by watching your channel! Kudos on having such detailed tutorials!
thanks, you're the best jason!
Great tips! Thanks!
THANK YOU!!!
Excellent! Thank you!
You are welcome!
That is very useful 👍🏽
HI, I have been gigging with my stomp for a few years. Really happy with the presets I'd programmed and all the clever ways you can utilise EXP pedals and snapshots etc. Worked a dream....until the latest update. Now it seems I can toggle blocks on and off on each snapshot but I can't use a switch to ALSO toggle the block on and off in one snapshot whilst keeping the smae block permenantly on in the other snapshot
Thanks, Jason! This was very helpful. If you have a chance at some point, I would love to see an explanation about snapshot stacking. I do this in command center. For example, I have two snapshots on 1 foot switch but the issue is I don’t have any LED turned on when that is engaged. Plus the snapshot stacking is quite confusing and would be helpful if you could explain how to use it. Thanks again, Jason!
Nice!
Jason I know this video is a year old. I've not been a snapshot user. However I now see a need to use it. All I want to do is assign a different preset per snapshot. Thus far I have not been able to get this to work even using command center.
New Helix user here and these videos are just amazing. Thanks!
New helix user here as well. How do you even get into snapshot mode on the unit itself? Do i need to enable something in global settings? Mode button just toggles back and forth between preset/stomp function
@@AchillesWrath1 In global settings you can change to snaps showing.
very useful.. What is odd is that in order to make the snapshot bypass work you switch it to "off" ! To engage a bypass you should switch the bypass on! Anyway, it works which is the main thing :)
1st of all, thanks for this channel. While using snapshot mode, can I have a FS with dual functions? For example, I have my Clean sound on FS1, and I would like just a tiny boost. Can I assign that parameter to FS1 so when I click on it a 2nd time it would activate that boost? (apologies if I dont make sense) Thanks!
Hey, I just checked this video today, I want to know if there is a feature to change/ boost output DB on one snapshot and have it lowered down for other snapshots?
When I set up a snapshot with some of the effects toggled off, then toggle those effects on in pedalboard mode, then switch to another snapshot, is there a way to have the first snapshot reset when I go back to it instead of having the effects I toggled on in pedalboard mode still be toggled on when I go back that snapshot?
BIG QUESTION HERE: does “snapshot bypass” now work with a wah? It did not in the last version.
OMFG, part 2 is the absolute worst element of the helix. Adding a block and the thing is auto ON for all snaps. Didn't know this checkmark existed Jason thanks. Really, shame on helix for not allowing users to pick the default state of blocks when adding because even this checkmark is simply to many clicks. It should be a global toggle choice so if users want it OFF, then we'd simply have to goto the lead snap and turn ON the single block as desired.
Thankx man. I wish i knew this 2 years ago. It would have saved me from 1000 mouse click in snapshot creation😀🎸🖱
Pod GO can do this? great gem!
Another way to do this is to put your delay in, turn it off, cut it, paste it. Now it's off on all snaps.
Now if only Snapshot Bypass could be off by default (global settings option). In fact I'm intrigued by the discord between the default opt-out for bypass but default opt-in for parameter control in snapshots. The latter workflow philosophy feels like it should be applicable to Bypass too, at least optionally.
Thanks Jason! such a small step that gives so many possibilities.
This makes it easier for my "ON/OFF Power cab mode foot switch" to go from normal FLAT FRFR mode and using the cabinet (or IR) to cabinet switched off and enabling Speaker mode. The thing is that I'm having problems because even though I choose a parameter assign "power cab mode" min to FLAT and max "speaker" and I select snapshot control "OFF" for this assign, it doesn't always work and when changing snapshots it sometimes changes from FLAT to speaker when to me, it shouldn't. I've tried building the preset from scratch but the same problem comes back.
To me this should work, I don't understand why it doesn't, I don't know if it is a 3.50 firmware issue for this parameter or if it is just me.
Can someone help ? Jason ??? thanks in advance
send in a support ticket to cust srvc at Line 6
@@sjsphotog Yes, that's the best, thanks!
FYI I just tried the disengage/re-engage Snapshot Bypass in Helix Native to see if it properly disables the FX in each snapshot, and unfortunately it seems to kick it back on in all snapshots when re-enabled. So, you still have to go through each snapshot and turn a new FX block off manually.
Seems to work fine in the Helix Floor hardware though.
You can change that in the global setting easily.
Well, that's for the hardware unit so I'm not sure about the HX Native.
Very odd. Followed it precisely and didnt work on 3.7
Is it possible to make all the same edit functions without using a computer and HX edit? I'm not set up for that. I'm trying to use it hooked up to my amp in 4 cable method but this thing is doing my head in. I'm new to it. I can't even figure out how to get into snapshot mode. When i press the mode button it toggles between preset/stomp mode. I know how to make a preset but what i want to do is be able to make snapshots. I can't figure it out for the life of me. I have an XL. The 70 something odd page pdf instruction manual doesn't really help. Do i need to turn something on in global settings that i'm not understanding? Any help would be appreciated thanks
Let me know if this much older video I did helps out at all: czcams.com/video/nSJefCG70Kk/video.htmlsi=tAw2LGjm4hWrcNvG
@@JasonSadites It helped some thanks. I've figured out how to switch back and forth from preset mode to snap mode by pressing the up down bank arrows together. I've created a few snapshots. I can see 1-4 and select between them but the buttons are white and it doesn't show the different effects on the little screen. It just shows a picture of cameras 1-4. The only way i can see the different effects is to hit the home/view button and that brings up the edit screen with the blocks/path. Any idea how to get the effects to show on the screen in snapshot mode and not just white buttons and pictures of a camera/snapshot labeled 1-4? It works switching between them but i feel like i'm still missing something. Or is that normal and should all of the snapshot buttons be white in snapshot mode? Thanks
Do i have to assign an effect to a pedal? I think i may be on to something. Is that why they're white and not showing on the screen?
p̴r̴o̴m̴o̴s̴m̴ 😢