Approaching The Scene 008: How to Protect Your Tripod
Vložit
- čas přidán 12. 09. 2018
- No matter what type of tripod legs and head you carry (metal, carbon, fluid or ball) they take abuse on a daily basis. I just got a brand new "Dream" tripod to replace it's 14 year-old predecessor. I'm using the occasion to show you how I set up, protect, and maintain it. The same tips and tricks will apply to your tripod and I hope this helps you protect yours. (links are below the break)
My last tripod has been in oceans and on mountaintops all over the world with me for well over a decade, from Kilimanjaro and Denali to Patagonia and the Arctic. I want to make sure this new one lives just as long and happy a life.
About Approaching The Scene: www.hudsonhenry.com/ats
Submit a Question: questions@hudsonhenry.com
Links to gear: www.hudsonhenry.com/atslinks - Věda a technologie
Hudson, In the summer of 2020, I built the exact Gitzo GT3543XLS/Sunway 75mm Bowl/Manfrotto Fluid Head setup that you recommended in one of your videos. After using it for nearly 3 years, I can honestly say I think it is THE BEST tripod setup anyone can build. The complete setup cost $1575 back then and would cost $2043 to build today. The increase is mainly due to the $300 increase in the legs. I know you came out with a later recommendation for a few different components but I highly recommend this setup.
Thanks for this video. Very timely, as I'm just configuring a set of legs to use bowl/fluid head. I'm really looking forward to taking this rig on the road this spring.
Another great video, Hudson- this channel is so worthwhile!
Thank-you Hudson. Did this tuneup today to my S3 Mountaineer. So much better than the bulky foam I had on it previously. Looking forward to getting back out again. Awesome series so far, really appreciate your work.
Awesome!
I was about order some expensive tripod leg wraps but decided I'd try the cork wrap you use in this video. Really like the look and feel. Thanks.
Thanks ... another helpful video with good practice methods to protect the tripod investment.
Watched this video several times, today, during my first installation of the handlebar wrap. Took many tries because I have a Series 5. A single roll wrapped tightly and with little overlaps gives me 2 inches exposed at both the top and bottom. I was trying to match the ratio on yours before I realized that you were demonstrating on a Series 3 (I know, I know, you mentioned it in the beginning. lol)
Have seen other solutions on CZcams for protecting the legs, but the bicycle cork seems like the best solution. :-)
Cool, I have that same Tripod never thought about wrapping the legs though. I will now. Thanks.
I try to watch all your videos, this one caught my attention because I have an older 3543XL, one of the best photographic equipment investments I ever made. One tip for those who use the standard rubber feet: they tend to work loose all the time, put a drop of blue Loctite on threads; will still be able to remove, but will be less likely to work it's way off. On the rock claws or spikes, another thread lube alternative is to use a little anti-seize, will protect the threads while adding some grip to the connection. Great video, as usual!
Also plumbers Teflon tape works well, clean, no mess, holds feet in place , haven’t lost any feet thus far.
Great content as usual!
Great stuff!!
Hudson, you are my Fav Henry kind of guy LOL, You have me thinking about getting new fluid head and tripod now.
Thanks Hudson, great video! I love that Gitzo tripod!!!
Yeah, it's kind of in a class by itself. :)
Really informative video, man! Thanks for sharing, thumbs up! :)
Super informative
Thanks man.
Thanks for some great tips. One question about transporting your tripod: Do you put it in the bag with the fluid head still attached or do you recommend removing the head each time? If the bag knocks against something perhaps it could damage the head? I’m wondering if I should order a bag just big enough for the legs or with space for the head too.
So where are the links for everything you used?
hi hudson ,is the profile design cork wrap come with 2 rolls in the packaging ? do you had enough of it or you had bought package, how long if your top legs section ? according to Q&A on b&h they said 17" can you confirm this measure please
thanks
Thank you for the information and tips Henry, i have the sirui extra long, but the lock require constant maintenance, my old Gitzo never had one issue with salt water, and never required any TLC, so thank you for this video, can you please link the lubricant you used here?
You bet. It's at the bottom of the tripod section here: www.hudsonhenry.com/atslinks/#fluid
4 years later, what do you think of this tripod? would you purchase it again or have you replaced it? Thanks - great video
Www.hudsonhenry.com/tripods your can see the evolution right here.
Do the wraps make the tripod leg sticky when you change it?
If possible, could you please give a link for the push-button greese applicator you used on the claw feet @ 8:52 in the video?
I could swear I sent one earlier... Sorry about that. amzn.to/2Qiu8d1
Wrapping tripod with grip tape seems like a good tip. I noticed this video was released a few years ago. Do you still use the same method and same tape these days?
Does the tape hold well even if your tripod gets wet in rain?
I've Leofoto LM-324C tripod which is shorter version of the one you're using. How much tape do you think I'd need?
Mine lasts several years even submersing in saltwater. Here's the link: amzn.to/3KG6Vd3 everything I use and recommend is here. Www.hudsonhenry.com/atslinks My current trips setups are here: www.hudsonhenry.com/tripods
You might prefere using loctite (medium) for the rock claws, oil makes them loose and there too expensive to loose them in the mountains
No, good synthetic grease with a well tightened thread ensures you can later remove them. I used medium Locktite on Gitzo feet once years ago and broke a leg trying to remove one. I worked as a mountain bike mechanic in college. Every thread on a good bike is greased and torqued to spec. I'd really urge caution with Locktite on carbon leg feet.
@@HudsonHenryPhoto i also put lithium and copper grease on my downhill bike everywhere :p you made a good point
Hi, Hudson. For the feet, if you ever change from the claws to spikes, you'll have to deal with grease on the threads of the feet. Would Teflon tape instead of grease also work to keep water out (but without the mess of grease)?
Great question. Never tried it. I just keep a ziplock with me. The grease is as much to be certain you can loosen them when needed as sealing. Not sure if Teflon is as good for that purpose.
I never thought of using bike wrap with cork. I wanted something like weight and not bulky but good protection. Great idea, I’m using your link. Is there a link for the tool that you use for your tripod to tighten the legs and head? I don’t see it then again maybe I overlooked it. Thank you for sharing knowledge and tips.
Hmmm, I'm not sure what tool you mean aside from metric Allen wrenches???
Hudson Henry Photography yes that is the tool I was talking about
Hey Hudson, I know you travel a lot and was wondering how you pack that tall Gitzo tripod. I really like the 79in working height but it only folds down to 28in. Do you pack the Gitzo in your checked luggage? I am on the fence about getting this tripod so your practical travel experience with it would be beneficial.
I do. I have an L L Bean extra large rolling duffle and I pack clothes and soft goods around it in the bottom. I can't live without that tall, stable pod. Little ones are just not secure enough
@@HudsonHenryPhoto Any concerns about it getting stolen from the checked in bag...it is worth alot of money.
@@i4nic256 I've taken it from Tanzania to Rwanda to Argentina and Mexico with zero problems. Put that bicycle wrap I linked on and it will stay nice and look less expensive. ;) if you use my links, I'd be most grateful.
@@HudsonHenryPhoto Thanks Hudson, will be using the links to pick up a few items very soon. Right now I deciding between this Gitzo and the Pro Media Gear TR344L 71" tripod. I'm only 5'7" so both these tripods meet the extra height requirements. I had to email Pro Media Gear to see if the RRS rock claws fit their tripod.
@@i4nic256 Ha, I'm sure they do and I'm sure that tripod rocks. Does anyone have them in stock? I'd love to check one out actually. It's the only other tripod in the class really. The big benefit is often being able to get up on a wall or step ladder and one or more leg way down below to get over things or a view from above. It's less about being tall. I'm only 6' even. :-)
Don’t you just love that tripod Hudson?
I do indeed. It's in a class all by itself. I'd been using it's predecessor for over 10 years I think.
Great job on the video, however there were no links
No, there are links of you click the title or show more. This is an old old video though. Nearly 4 years old. I've learned a lot more since then. Www.hudsonhenry.com/tripods :)
👍👍
I just hope you have less problems than the Gitzo systematic I bought...
This is my second in a row. The first lasted 17 years from Denali to Kilimanjaro to Patagonia and beyond. My buddy is still carrying it. I've been beating the hell out if this new set in salt water and desert sand with not an issue. No one had shown me a better set of 7 foot, 5 pound carbon legs yet... What issues did you have?
Why did you choose this gitzo over a Promediagear or a RRS tripod?
This Gitzo is the only one of its kind. It's 79.5 inches tall, 5 pounds, series 3 carbon, holds 55lbs and has a modular 75mm bowl or plate attachment. No one else makes anything close. If you can find one that gets that tall and weighs so little please let me know. :) It also is incredibly well made.
I went with a Robus 5570, and for $200 more could have bought an 8880. The 5570 has a max height of 70 in, but with the manfrotto 502 fluid head the camera view finder is 84 inches, with no center column. The max payload weight is 55 lbs. Check it out, it's a B&H exclusive.
www.bhphotovideo.com/c/product/1383159-REG/RC-5570_Vantage_Series_3_Carbon_Fiber
HI Hudson--Great video and congratulations on your new Gitzo. I have a Manfrotto; MPRO 536 3 stage, 4 section carbon fibre tripod with 100mm/75mm bowl that is also about 80 inches on the tall side and 10 inches on the low side and also supports 55 lbs. The Manfrotto weights in at about 7.5 lbs so it gives up about 2.5 lbs. to the Gitzo, but cost about $200 less. I pair it up with a Manfrotto 504hd fluid head--. Thanks for another great learning experience! @@HudsonHenryPhoto
Nice video, thanks Hudson! I've now replaced my ball head and short legs with a set of 70" carbon fiber legs and a 502 fluid head. I love the combo whether using my DSLR or RZ67. Thanks again so much for the great advice!
The photo below is a Manfrotto 190XDB with a 498RC underneath the Robus 5570 for perspective.
drive.google.com/file/d/1rI9JtjfPAyodvBnWiUJNBq_URZvffbI5/view?usp=drivesdk
I really prefer the size and feel of the 500Ah to the 502, but i carry this gear on my back a lot. The Robus is a new discovery of mine. I'll do a video on them soon. They're a great budget alternative to the Gitzo sticks if you can stand an extra half pound and a bit less height. They are surprisingly well made!
Why is audio so noisy?
I don't remember what I was using then. It's from about 110 weeks ago. I think I was using an old mic setup through a D850 dslr preamp back then.