This blokes an absolute legend. My new box had issues, he came out to my car tried everything and when it wouldn’t work he went in and grab me a new box straight away and works perfectly. 👏🏼👏🏼 Check out their new store it’s huge!
What about cleaning the dyneena rope by soaking it to get sand and grit out of it? They do wear out and snap. I'd carry a spare rope when it starts looking old and frayed. Also does the dampener bag need sand or dirt in it to work incase of a line failure?
Help my kings dominator winch just clicks when I press the controls when I put my hand on the solenoid you can feel It clicking any ideas what to look for
I had this same issue. The red cable that went to the winch had no continuity through it but looked fine from the outside, I removed the cable and the heat shrink to find crimped lugs and the cable full of green corrosion at which point the lug fell off. The vehicle has not done any beach work
Hi there, Feel free to contact us on social@4wdsupacentre.com.au with a screenshot of this comment and your order number so we can look into this further for you. Regards, Courtney
I've been using Domin8r winches as long as we've been making 'em and swear by em mate. If you do like I showed and spool it out and in once a month it'll be a faithful workhorse for ages. Cheers Brenno
HI mate, this is so helpful and timely - my winch makes a click sound when i try to winch out but it is able to winch in? I am also unable to change my winch from the activate to disactivated, it seesm to be stuck? Any tips here?
They have troubleshooting guide just for that, I had the same and it was the female pins in the solenoid weren't contacting properly, give them a clean up and test with a paperclip connecting 2 pins at a time, 2 for in and 2 for out
![EASY Winch Servicing Guide [2 Hour Job]](http://i.ytimg.com/vi/ytv_Y6dOaAk/mqdefault.jpg)
This blokes an absolute legend. My new box had issues, he came out to my car tried everything and when it wouldn’t work he went in and grab me a new box straight away and works perfectly. 👏🏼👏🏼 Check out their new store it’s huge!
That one was bloody handy. Thanks guys
Glad you liked it mate, cheers for watching - Brenno
Great tips there!
Legend thanks mate! Cheers Brenno
Very helpful thank you
Glad it was helpful Jas! Cheers Brenno
What about cleaning the dyneena rope by soaking it to get sand and grit out of it? They do wear out and snap. I'd carry a spare rope when it starts looking old and frayed. Also does the dampener bag need sand or dirt in it to work incase of a line failure?
Help my kings dominator winch just clicks when I press the controls when I put my hand on the solenoid you can feel
It clicking any ideas what to look for
Did you figure this out
@@michaelcarrafa8766 the winch needs pulling to bits from lack of use and cleaning
I had this same issue. The red cable that went to the winch had no continuity through it but looked fine from the outside, I removed the cable and the heat shrink to find crimped lugs and the cable full of green corrosion at which point the lug fell off. The vehicle has not done any beach work
my dominator xtreme works with the controler plugged in but not with the reciver plugged in and on wireless any ideas thanks.
Hi there,
Feel free to contact us on social@4wdsupacentre.com.au with a screenshot of this comment and your order number so we can look into this further for you.
Regards, Courtney
Buying a cheap winch is like buying a 10c condom and then leaving it in your wallet for a year and expecting it to still perform.
I've been using Domin8r winches as long as we've been making 'em and swear by em mate. If you do like I showed and spool it out and in once a month it'll be a faithful workhorse for ages. Cheers Brenno
Yep. Don't buy a dominator
HI mate, this is so helpful and timely - my winch makes a click sound when i try to winch out but it is able to winch in?
I am also unable to change my winch from the activate to disactivated, it seesm to be stuck?
Any tips here?
They have troubleshooting guide just for that, I had the same and it was the female pins in the solenoid weren't contacting properly, give them a clean up and test with a paperclip connecting 2 pins at a time, 2 for in and 2 for out
Wish i saw this 3 months ago, stopped working after 18 months so i took it out and launched it !