Worker Seagull The Only High Performance Nerf Blaster You Need
Vložit
- čas přidán 2. 08. 2024
- Want to Pick up A Worker Seagull? Want to Also Support Flux Labs so we can keep making the content you love? Then Support the Channel by buying from Out of Darts with the Official DrFlux OOD Affiliate Link! outofdarts.com/?ref=qnv0p66y2p
The DrFlux Landing Page
linktr.ee/drflux
Join this channel to get access to perks:
/ @drflux
The DrFlux Patreon: / drflux
DrFlux Patches: silverfoxindustries.shop/coll...
Want to Send Us something to review, or look at, or to say thank you? Then mail to our PO box:
FluxLabs
PO Box 2021
Bremerton, WA 98310
#nerf #worker #nerfblaster #blasters - Zábava
Thanks for checking out the Seagull. I'm extremely impressed with this one. Each Worker blaster release gets better and better!
It's a really good gun I wish nerf made this
Where did you get that stock from?
Why disassemble the entire blaster to swap out main springs when you can just break up the front and back shell? The spring swap is basically the same as the Harrier.
I've an upgraded unicorn... While I like the seagull's looks, I already have it's bigger brother the Harrier.
The small form factor of the Unicorn is key for me.
It's so easy to just take out the stock and throw it into a backpack which makes it easy to transport and low profile.
This is an important factor in karen heavy Singapore where anything that looks remotely like a firearm attracts unwanted attention in the subways and by rubbernecks.
I defiantly prefer the seagull over the unicorn, even if it is just for one reason, the threaded barrel.
I feel like the unicorn is a better blaster for cqb, but the Seagull is a better blaster for a wider range of uses. I’ve got the white version preordered and I can’t wait to paint it up and use it as my competitive springer primary
Our Boy Coney, repping the KCNC swag! Miss you brother. Hope your loving the West Coast life
You didn't need to open it at the center when you were changing the springs lol. There's a video review out there that's in Chinese that shows that you don't have to go that far to change springs.
Maybe they’ve never used a Harrier before? I’m genuinely puzzled as to why they did that and then said it was a fault of the blaster/spring
@@godeatsbagels Yeah it's so weird. I don't own a Harrier myself but I did see reviews lol.
@@lanochethat isn’t why they do that. They always open the entire blaster to show you the internals.
Damn bro! Your Video quality is getting better by the day 😳
Got one pre-ordered, might buy another one depending on how I feel this one. I'd want two eventually. It's probably gonna be the last springer I buy for a while. Trion and this would be my rotating blasters depending on what I feel.
Love the one grit!!!! Dank pods fans are everywhere!
I have a unicorn on the way. What drew me to it are things like being nylon not ABS, and the toolless takedown. I intend to get one of these too
I want one soooo bad. Such a gorgeous blaster. Love the barrel options and picatinny side rails. Can you use an AR style rear grip on this?
I put in my pre-order for this bad boy already, I can’t wait!
Loving the Dankpods 1 Grit reference!
Coney rocking that Kansas City Nerf Club shirt!
Gotta represent the bois 😎
Looks sweet. Thanks for the video fellas.
Our pleasure!
Nice 👌
The durability issue with 3d printed blasters is... sunlight. I had a very nice 3d printed blaster. I don't want to say who it was made by because my issue isn't with them, it's with 3d printed stuff in general. Being in direct sunlight warped it and it was rendered completely useless.
I cannot wait for my preorder 😖😖😖😖
125 is pretty damn good for it.
Why you change catch spring with the main spring in it?
Thanks Lukes squared.
I will reserve my opinions for when i get mine, but it's the most expensive small springer blaster. This has to compete with the unicorn and the trion, which have a much lower pricepoint. Can't wait to see some comparison reviews, which are quite absent these days....
This over the nexus pro?
Is the spring easier to change without the catch spring jumping into another dimension, if you split the receiver from the barrel first? I imagine you wouldn't encounter the catch spring that way, since it would be captive in the receiver.
I tried that, but it's risky. I found it easier to remove the back three screws and carefully tease it in.
@@ConeyDawg I guess I’m a little confused because the Harrier had no such issues and the shell looks identical? Is the catch a different design from the harrier? Thanks in advance for the help!
As far as I can tell everything is the same except for size. There's less room for the springs, hence the jumping out.
Nah you don't crack it open the way they did. You just separate the front and back from the middle and it comes out. There's a review that's been out for weeks in Chinese that shows how to do it. Dr. Flux just went the college try way instead cause he probably didn't look at any instructions on how to do it properly.
@@lanoche lol yeah I was confused
damn, man, you need to take a breath. i was worried you were gonna burst.
breathing is for off camera
Wierd question, is the Worker Seagull a full kit to build or is it just an assembly required blaster? Does the price depend on the color you ask for?
Partial assembly required. All colors are the same price.
Vs trion?
I am begging somone to make these in RIVAL
I gonna be first in Russia, who have a Seagull. Very excited!
If it was a AEB, i'd buy it in a heartbeat. Am just not a manual springer guy. Love my flywheelers and AEB's.
Seeing how worker was on flywheelers and now on springers, It's possible they're going aeb's next.
I think they'll do a springer pistol first
Random idea I had: what if someone made a 3d printed full-length dart lmg? I’d love to see something like an RPK or M249 SAW. I feel like belt-fed/ light machine guns are very uncommon in the hobby and they should be more common
Very large 1 Grit. Is that grandma 1 Grit?
Does it have slamfire?
Unfortunately, no.
I have a nemesis and I’m fine with it. It hurts enough for me 😂
How does it compare to a Unicorn?
Note I don’t own any of the 2 blasters but I believe that the seagull is basically a Harrier mini. The only diff I can think of between the 2 is that the trigger pull for the unicorn felt heavier than the Harrier. If you have any specific details you want to ask go ahead.
What kind of plastic is it made of?
feels like nylon or something very durable
@@drflux great thanks!
Caw Caw Caw
that's not a 1 grit that's a 0 grit
I want to go back to when an awesome high powered blaster only cost $50.we shouldn't be paying so much for toys. The thing that sold me most on nerf was the cost a how readily available they were. Now not so much. It's becoming increasingly expensive and I'm seeing blasters that only certain people can obtain. For me this is a major turn off to nerf. The reality is if you want to stay in this hobby. Start reaching deep into those pockets.
There are more $80+ blasters now than people in the hobby. They almost all look the same. Either milsim or copies in different sizes of the same blaster. Yay.
First 😊
I see what you did there. SOLID.
$125 is way too much, over $35 is too expensive