Video není dostupné.
Omlouváme se.
Fix INACCESSIBLE BOOT DEVICE Error in Windows 7, 8, 10
Vložit
- čas přidán 18. 01. 2017
- Fix INACCESSIBLE BOOT DEVICE Error in Windows 7, 8, 10
Blue Screen of Death errors are very common in Windows, these can be caused by a things. Faulty Hardware issue, Software Corruption or Conflict, Corrupt or Bad Driver, Corrupt Registry and Improper Windows Shutdown. All these BSOD (Blue Screen of Death) errors will crash Windows 7, 8, 8.1 and Windows 10. You're computer will be stuck in a reboot loop and consistently restarting your computer. I am going to show you some steps to help resolve and fix / repair INACCESSIBLE_BOOT_DEVICE error.
Need help? join my forum
www.briteccompu...
![Fix Windows 10 Blue Screen of Death Error [Tutorial]](/img/n.gif)
Thanks I gave it a try but even though I followed all the steps it did not solve my problem. I decided to do a reset and go from there. Microsoft and their Auto Updates are worse than a computer virus.
I can't even run safe mode
Same here man, feels bad
Me to i cannot do anything pls help
What did u do
When i try run safemode system will load in bluescreen
How did it happen to you?
The last one (regback) did the trick on my winserver 2019. Thanks a lot!
I made a registry change to allow use of HIPM and DIPM, which led to the 'boot drive inaccessible' error on Windows 10.
Follow this guide to rename and copy the backup registry and it worked!!!
Just wanted to say thanks, a reinstall of Windows was my next step, so this was a welcome surprise.
Thank you! Thank you! I did everything but the regback part before, this got me back and operating again!!
Glad I could help.
@@Britec09 hey i did regback and it worked first time but now im stuck again in loop,and i think i have 3 of every of those 5 files (security,system,sam,default,and one other that i can't remember name of). Can you guide me or give me commands that would be usefull in deleting previous failed backup files?
@@Britec09 hello there, I urgently need some help, is there any way to contact you, an email id or something, I have the same error Inaccessible boot device but the error is also clashing with CMOS checksum error. Thanks in advance
i cannot rename the file its say: "The process cannot access the file because it is being used by another process."
This was definitely a GREAT fix! I've worked in the IT field for a long time, majority of the experience in desktop support / sys admin, and this issue happens a LOT! I never knew you could use the regback method to restore a PC. How did you figure out this solution? Thank you for the great video :)
I can say myself that this worked using the last option, I had to restart again after getting the same start up error screen but chose to restart and it worked.
Cheers for providing this support video, for those still stuck I'd recommend this option before seeking professional help.
Whatever I do just brings me back to the choose an option screen wtfffff
Thank you sir!!
For me: I messed around with bios, wouldn't boot, tried everything. Booted in safe mode and did restore.
only one place for serious fixes keep it up bro
Prathamesh Labhade i still have problem
i fallow your vedeo then we going to regback there all 0
so what can i do sir plz help me
Same problem.
then, what did you do?
pls help
I have the same problem, someone help PLZ!
Me too😭
Thanks so much!! using the regback method saved my pc, it couldnt even load in safe mode.
Can I make a spanish version of this tutorial?
Toño Net9
L
For the cd windows\system32 my laptop said that “The system could not find path specified.”
Yh
My system also same prblm
Updated my bios and drivers and got a bunch of these errors. Watched your video and quickly realized my bios settings had been changed from ACHI to onboard intel mechanic. Changed it back and it worked perfectly. Thank you for the help.
Un-freaking-believable! My PC couldn't boot after a power outage and I've been trying to fix the problem for two weeks. Microsoft support has provided me no useful tip whatsoever, but you just did the trick for me! Thank you!
The problem is NOT YOUR COMPUTER. The problem is MICROSOFT and their WINDOWS UPDATE, and not HAVING TESTED ALL THEIR UPDATE SOFTWARE - CLASS ACTION LAWSUIT.
I had a customer who had a NEW DELL LAPTOP. She let Windows 10 do an update and went to BED. When she woke up the next morning, and turned on the computer. It ended up saying "NO BOOT DEVICE FOUND". I called DELL, and he had me go into the BIOS, which the only thing there was the SEAGATE HARD DRIVE, and not WINDOWS BOOT MANAGER. So, the Dell tech had me type in WINDOWS BOOT MANAGER, then click the ADD DEVICE BUTTON, and go find the BOOT FILE, save it, and reboot.
THAT FIXED THE PROBLEM. That is to say that MICROSOFT IS FLASHING THE BIOS!!!
TIME FOR A CLASS ACTION LAWSUIT, to MAKE Microsoft FIX their FAULTY UPDATE SOFTWARE!!!
Robert, could you help me? how do I "type in" windows boot manager to my bios?
My computer crashed due to there Microsoft Insider program. I went to Best Buy tech service to pay around $300 to pay to get my computer fixed. For an about a few weeks. Thank goodness I made a USB Media portable drive. It saved me cash and my computer. Turning off Windows Update has helped me a lot. I can see what updates are available and I can download them when I want to. Plus when I want to restart the computer I do not have to wait until Windows Update to finish what it is doing.
SOmetimes when the W10 updates, it reset the BIOS and you need to tweak the SSD/HDD to ACHI mode.
switch off tpm module
I will NOW switch off my COMPUTER
you saved me from a big data loss.....thanks a lot....iobit driver booster crashed my windows...searched a lot over internet, i was having restore point but that was waste. At the end your tutorial worked. I don't know how to Thank for this :) :)
I was so close to delete All my data but then i uninstalled Iobit driver booster and now i dont have this problem👍
so uninstalling iobit driver booster actually solves this issue?
Ashish Agarwal my driver booster did same
Ashish Agarwal thanks so much, going into safe mode and uninstalling driver booster and advance systemcare(just to make sure all iobit software is remove) and viola 👌
Ashish Agarwal mine didnt solved after following all the steps please help
Thanks Brian, it's my backup PC and I have been meddling around for a few days and finally changed the SATA setting back and forth as you suggested and it came back to life, save me a trip to the repair shop, keep up the good work.
Did you find a way to fix it? I've tried all I could, and they are not working 😓
what do you do if you are stuck at the "Diagnosing your PC" screen?
You must to wait until finish
Thank you so much! Just letting you know your video helped me out and I really appreciate it. Turns out your very first solution of switching SATA modes worked. Once again thanks, keep up good work 👍🏽
This is also known as a manual replacement of the registry from a working backup. I've done this on a WinXP system once. Works like a charm, this procedure, when it works. Great video.
Invaluable information mate.I'm sure a lot of people just get frustrated,and a) just reload Windows..or b) buy a new computer...or c) pay a bunch of $$$ to repair guy. lol.Been there,done that. I've had Windows 10 Home retail installed since September of 2016 on an SSD about the same age and my PC boots in seconds.Do you know why ? I think it's just simple maintenance. I actually use CCCleaner (free version) and it has NEVER let me down. I use msconfig regularly and I stop services I don't need.Windows 10 has a crap ton of services running in the bg as it is already.I delete my temp files regularly and use disk cleanup.I still have 100GB left of a 250GB drive and I put all non essential software on other drives,even games and 3D renders are on an SSHD,which gives me no problems.Plus,I'm the ONLY one that uses my PC.I'm no genius or anything and I've become pretty adept and confident over the years to troubleshoot errors (codes) and whatnot,but PC's need maintenance just like anything else.More actually.IMHO.But I like this video for the change directory information,specifically how to copy to another directory.The admin CMD can save your life.Well,your PC anyway.Thanks a lot! Subbed and liked from me.
Changing to AHCI worked. Thank you Britec09. You are awesome.
Same
Did not work for me..
Daria72
Command prompt must work
If it doesnt work try c: instead of D: then try f: .. etc
@@smilemaker1794 that's not working
Not woarking my 0 files in regback i will try to boot windows from usb
Thank you so much! I was able to get into safe mode, then run the scan as an admin. It found corrupt files, restored them, and I'm back online!
My computer booted after using the regback technique, but after shutting down and starting again it still gives the same error again and I have to use regback EVERY SINGLE TIME.
Same
Try a new way. Regback is OVIOUSLY not working
Hello I'm back 4 months later. Been running it for a month without shutting down and just postponing all the windows updates. Finally decided to restart and try play with it again. No luck so far.
Directory of C:\Windows\System32\config. Most of the files have data in them. Directory Windows\System32\config\RegBack. All the files have 0 Data in them.
Same as me I just reinstall my pc
@@marioshondrov8646 I made a USB Media portable drive it helped me save my computer and taking my computer to the repair shop. I saved some cash. command Prompt comes in handy when most other options to fix the computer do not work.
first try to locate where the windows is. is in drive F/C/D/the drive name you gave initially when you are installing windows or you can check that by typing in the command prompt From Boot Options start Command Prompt.
Enter the following and press Enter:
1.bcdedit
2.Find device partition and osdevice partition values and make sure that they are set to correct partition. On our device, the default and correct value are C: but this can change for some reason to D: (or some other letter) and create problems.
3.bcdedit /set {default} device partition=c:
4.bcdedit /set {default} osdevice partition=c:
5. By default it should be C: but if your Windows 10 is installed on a different partition, make sure that you use that partition’s letter instead of C. on mine is F. So you i start with the letter
X:\sources>C:
C:\>dir
C:\>F: // change it to F or some other letter you get where the windows is stored
or you get the error cd \windows\system32\config it says system could not find the path specified.
then follow the steps in this video
If none of this works for you, try setting your bios setting back to default. Look for "Load Fail-Safe Defaults" or "Load SetUp Defaults" or "Restore Defaults" then Save & Exit the BIOS menu. That Worked for me.
Wow it worked!!! It's been months since my screen has started showing BSD and I tried lots of things and they didn't work. I was going to reset it today and had decided to give it one last try and come up to your video and the last step worked. I couldn't believe my eyes when I see the login screen. Thanks a lot.
How do you go to settings at 1:27
Bios > boot
Hold down "delete " key on start up.
what if automatic repair doesn't show up
RycorzHS ikr
Mine shows up . Doesn’t work tho . I hate getting hosed by my pc . I brought it into this world and I’ll take it out! Where’s my shot gun
Imma die,can't play roblox now 😿😭😭😭😭😭😭😭😭😭
acrock21
Lmao
acrock21 lol
Cheers again Brian. Been trying for a day an a half and like Ashish Agarwal says, it was iobit driver booster that caused my problems. My C drive SSD wasn’t even being recognized. Finally tried the safe mode and deleted that iobit and voila. The relief is like scoring a hat trick for Man Utd.
Thanks! Going into safe mode and rebooting actually solved this for me. I followed other steps before going into safe mode, so I’m not sure if they both allowed it to work (the other steps alone still resulted in blue screen), but either way I’m glad. Not sure why I didn’t try safe mode from the start.
What if data of these folders (default system software sam security) shows "0" is there any solution for it?
Kamil Kruczkowski +1
I tried taking power cord out (did 10 times) went to blue screen. I also tried restoring it, no luck. Then I did the command prompt, no luck. Then did fix pc for problems, no luck. Now I am resetting it
I have no idea what is causing it to not load. I was wanted to restart pc & the screen of loading came, nothing loaded for 3 hours.
Mohit4GHGaming sometimes you just gotta take it to a tech
I upgraded from one m.2 drive to another and had this issue after reimaging the new drive, your video saved me a lot of time. Cheers
Thank you I've fixed my problem 👍
Tried to upgrade a CPU and fluffed it up, after 3 hours of trying I gave up and tried to put back the old CPU and got the "inaccessible boot device" id already gotten into automatic repair, but had no clue where to start and this video made it so easy to fix.
My regback is empty
Music Stars Did you figure out a solution?
Music Stars same
hi.. i am having this issue and it wont let me in the automatic repair options. it just keep restarting. btw i dont have the cd or flash usb.. lost it.. is there any other way to fix? please advice.
Try Use the “Shift + Restart” combination. Another way of getting into Safe Mode after Start + Run+ CMD then do same as Vid Says
Zalim Ji restart? may i know which button?
Hold ( Shift ) when it take Restart
Zalim Ji So i have same problem blue screen,i have no discs and usb i can only go to UEFI firmware settings pls help what do i must do?
@Lily
When you turn your PC on hold down the "ctrl" key bottom left on your key board and keep pressing "F-10" it will by pass the blue screen
@Britec09
I have an Alienware M17xR4 with CPU: Intel i7-3610QM (2.3Ghz - 3.3Ghz).
When I disable Turbo Boost from B.I.O.S. then works but slowly.
When I enable Turbo Boost Mode from B.I.O.S. then the computer when try to load Windows 10 after about 11-12 seconds.
Is the problem in C.P.U. or in Motherboard or somewhere else?
Recently my laptop started problems, kept saying, automatic repair then diagnosing then blue screen with an option of restart and advanced. I tried most things from advanced option but nothing worked. for days it was a wild goose chase, I even tried methods from other videos but it didn't work so I thought last option is to take it to a computer shop or I may have to do factory reset and lose photos, music etc.
But then I came across this video and tried the command prompt one and now my laptop works again. Thank you very much.
Damn, great video but unfortunately I have 0's nxt to the backup files. So, it seems I watched the whole video for nota.
Thank you very much, it worked, i dont speak very good English, i follow you step by step and it worked. Thanks.
Thank you - the reg back solution worked for me, all other suggested methods and tutorials I followed else where did not work so this video was a massive help and was simple to follow. Thanks again!
I can’t find any files on the regback folder, can anyone help?
Up
?
+
Here is a PHRASE that you, the viewing public, might want to ADAPT...
"I want to USE THE COMPUTER. I don't want to FIX THE COMPUTER..."!!!
TEXAS has a LEMON LAW that says that CAR COMPANIES "CAN NOT" sell a car to the public that is known to have problems. IT IS ILLEGAL. So, why is what is going on with WINDOWS 10 UPDATES and the WINDOWS 10 OS any different?
If you buy a computer, you expect it to work, WITHOUT having to FIX IT every time you turn around, and to make matter even worse, MICROSOFT has removed the ability to STOP ANY WINDOWS UPDATES, like previous versions of Windows had...
ARE YOU KIDDING.
This is like going to buy a new appliance, like a stove. You get it home and start using it. ONE WEEK LATER...
You have to get out your tools, and work on the wiring inside the stove.
I don't know about you, but I, for one, would be taking this stove back to the DEALER, and tell them they can KEEP THIS PIECE OF CRAP STOVE, if not SUE THE DEALER and the MANUFACTURER OF THE STOVE!!!
============
MICROSOFT tells me, when I call them, that they receive 500 calls a day about WINDOWS 10 PROBLEMS!!!
ARE YOU KIDDING??? REALLY. Does that not speak volumes? It's no wonder that Microsoft outsources their tech support business to INDIA. That is to say that MICROSOFT does not want to mess with this STUFF. They only want to rake in their
BILLIONS OF DOLLARS, if not TRILLIONS, and screw the public... Look at all the video's on YOU TUBE. This WINDOWS 10 is worse that WINDOWS VISTA ever was!!!
I did the regback stuff. But now my pc just goes into automatic recovery every time. Not sure what to do know
Captain Bacon Did you find fix?
UnReal FlipZy Nope, did a fresh start keeping my personal files
Hi i got a problem like this too. But for me i can't even start with step 1 cuz my screen stays on the alert where it says preparing automatic repair some one help me please?
first try to locate where the windows is. is in drive F/C/D/the drive name you gave initially when you are installing windows or you can check that by typing in the command prompt From Boot Options start Command Prompt.
Enter the following and press Enter:
1.bcdedit
2.Find device partition and osdevice partition values and make sure that they are set to correct partition. On our device, the default and correct value are C: but this can change for some reason to D: (or some other letter) and create problems.
3.bcdedit /set {default} device partition=c:
4.bcdedit /set {default} osdevice partition=c:
5. By default it should be C: but if your Windows 10 is installed on a different partition, make sure that you use that partition’s letter instead of C. on mine is F. So you i start with the letter
X:\sources>C:
C:\>dir
C:\>F: // change it to F or some other letter you get where the windows is stored
or you get the error cd \windows\system32\config it says system could not find the path specified.
then follow the steps in this video
I like the way you explained it, thank you! Unfortunately, I didn't have anything in the regback area and all other options didn't work for me either.
Thank you soo much !! Saved me !!
My desktop had the inaccessible boot device blue screen error, i was panicking as there was no help even from Microsoft support and finally i found your video!!
The last command prompt with system 32 did the job. Thank you once again
WHY IS THIS HAPPENING TO A LOT OF PEOPLE RECENTLY?!?
John Johnson The new windows update fucked it up
Void Blitz Thank you for the reply and the information left a sub :)
Thank You for downloading this video however when I did it I had to use the c: prompt D prompt wouldn't work. it took a long time but I was able to reboot my laptop and fix it on my own I would recommend this video to everyone.
I don’t really know what happened exactly because I wasn’t able to open the Bios setting but I went to safe mode and then shut it down. Open it again and then it came back.
But this is a great help. Thanks!
@Britec09 you're a genius !! :) all the menu stuff didn't work (particularly since booting on a windows disk doesn't enable my mouse & keyboard for some reasons) but the last set of MS DOS commands (where you copy regback files) totally did the trick ! Thanks a ton !
By the way, do you happen what could have induced this error in the first place ? My PC was working fine until it suddenly displayed this blue screen of death at boot !
Francois Gerner Dude its so weird yesterday a lot of people suffered from this problem, in my case i was installing something on my harddrive and while it was installing i tried to launch my game but suddenly blue screen!
I have 0 empty data on regback what can i do next? help please
Same here
Same
Same.
Same
@@MariaSalman232 same problem.then what did you do?pls help
how did u get automatic repair
Mine says script files
Y
Ed Davis
Same
Thanks for the guide I managed to see my problem. I wanted to use my SSD boot drive from a previous computer. My new Dell XPS 8950 had it Set on RAID by default and I changed it AHCI and it started to work perfectly
I cant do the last method help ( the process cannot access the file because it is being used by another proccess ) plz help me
Thanks brian :-D
Did you corrupt the hardware section of the registry to create this problem, you naughty boy he he :-D
zx8401ztv lol
Can't tell you all my secrets. I used to train people and mess up a computer to see if they can fix it, most failed lol
Now you say computer, if that means hardware then i allways install only the minimal, then drink lots of tea and LOL :-D
Memory is a shit for causing odd problems.
If its the o.s your talking about, and its windows, there is a hell of a lot going on that you dont see, drivers are a good cause of all sorts of problems, and the registry is full of seemingly cryptical crap, so if thats screwed i shotgun it with an earlier copy.
Fixes most silly problems.
As i said, im no tech, but people shove there computer under my nose expecting me to fix it, and i do, but in a crude way in comparison to the way you would do it brian.
corrupt registry and drivers cause a lot of BSOD.
mine has a box saying enter password. I do then it asks for master password. I put that in and it starts to boot up then goes right back to asking for password. Help
it wont let me really do anything not even reset or remove anything can you help ?
David Salinas I fixed mine for now I did a custom install off a disk and did another windows files my old windows folder in it and my personal data was in there but my drive is full if u do this might ask for a key or delete your data
Joey A guess i could try that. I just figured out it was my hard drive cuz this is like the 5th time it did this for literally like no reason. a simple shutdown and turn on and it say inaccessible. I might just have to recover the files and maybe get a new hard drive but I should probably the your method first. I honestly couldn't figure out how to fix this thing and all my friend has done was reset it and reset and it's still doing this.
Well I hope u get it fix
Omg! Thanks! After a lot of prompt commands, restoring point, i found that it was my BIOS setup, because i was changing IDE of the storage to AHCI, (because i heard about AHCI give better performance) so it wasn't able to find the boot, so i came back to IDE and everything works, so if you're reading this comment my disparate guy just change it again or if you have more troubles remove the battery of the bios, so anything was settled wrong would disappear and the bios would starts with default values, but remember to correct the clock and date.
Thank you very much, it was the Intel rapid storage option for me, it was enabled, once reverted back to AHCI it worked
Thank you!
Safe mode didn't work... I'm fucked aren't I
madbomer72 same 😂
You are the best source of PC trouble shooting on youtube. This is the second time your regback method saved my computer. I would give a thousand likes if I could!!!!!
I stuck in preparing automatic repair. Its not going to next page. What to do
No file in regback , how must i do?
install windows
VERY GOOD, ITS IMPORT TOOLS TO USE
.
after repair my hdd doesnt work i changed sata mode from ide to ahci and now im changing it back and the problem return again
Excellent tutorial. Coping the backup files resolved my issues. Nothing else worked. Thanks a million.
"Lets go into bios fist" ok....... how! ? LOL. I need a new PC
Pressing F2 or DEL right after you turned it on
thanks it worked
Switching from ide to sata fixed my problem. Thank you
i can use windows 8 cd for getting cmd on windows 10 or not?
I did the RegBack method and still not resolved for me. I had done a Windows update two days ago and then my PC started booting into the blue screen with this error. I tried a bios rollback but that didn't help either. I took out the CMOS battery and also the graphics card and nothing helped. Anybody have any ideas? EVGA Z170 with Kingston SSD running Windows 10 64 bit
Escribo desde Colombia, esto Realmente me a sido de gran ayuda realmente funciona si se siguen los pasos al pie de la letra, muy agradecido con este canal. es mi primer comentario en youtube despues de muchos años... Estoy tan feliz!!
In acer devices you may not be able to change sata mode setting in the bios
Then simply go to bios main menu and there simply press Ctrl+S then sata option will appear then change accordingly 👍
Thank you. I did fix from your method. Very usefull.
I do change from IDE mode to AHC mode and works.
THANKS VERY MUCH Britec09, you are the MAIN MAN!!! I first encountered the problem by swapping my old 128GB M2 System drive with a new cloned 1TB M2 drive. Then started getting the "INACCESSIBLE BOOT DEVICE". What fixed it for me was the Safe Mode, and I only had to run was option 8: Open Command Prompt ......... and run SFC /SCANNOW. And I am back in business. Salutations Sir Britec09 :-)
Wow, many thanks to you. Restored my system only from your last method. Tried to restore whole day along before your video. Thank you.
when i update my avast antivirus and i restart my pc,this blue screen error appears(inaccessible boot device),so i run into safe mode ..and remove /uninstallmy avast update along with the apps..and my pc turn back to normal...Thanks Brother...Thank u
Thank you so much!! I almost had a heart attack trying to get my laptop to work again. I was so scared
so when I enter REN Default Default.bak it says Path not found? Please help😩
Thanks for putting this video up, I did Follow all of your steps, but unfortunatly Windows 10 is being a right royal pain in the arrrrse and does not work!
Thanks again. Roy
Thank you very much for the video! I recently attempted to remove Linux from dualboot, found out tons of boot stuff was left behind from multiple Manjaro reinstallations and recently Garuda Linux and in removing them it wouldn't boot after a restart. After many searches on my phone and attempted fixes with CMD commands I realized because of this video my default boot device was not Windows Bootloader lol 🙃
Mate you just saved me from losing lots of data with the regback method. Thank you!
Mine stays on that blue screen. Doesn't flash off. Happens numerous times but has not brought up the automatic repair screen. I have gone into control panel, hardware and sound, blue screen....Nothing happened, couldn't find a problem. What now?
You are awesome. I was trying for an hour to boot my pc, and tried everything but nothing helped me. Thank you sir. :)
Why do you need the DVD or USB? I can get into the automatic repair without them but command prompt doesn't work when I search for c: or d: . Is it because I don't have the DVD? I don't want to buy one of its not going to solve my issue, thanks:)
Changing the SATA mode helped my issue! Can't believe it haha. Thank you. Freaking windows updates.
Thank you so much, Britec! Regback worked for me. Do you have a video about the CD/DVD drive not appearing?
automatic repair will show after some time if wont show you can use bootable windows image on usb example and then go to command option from troubleshoot and type DISK PART after it LIST DISK ,SELECT DISK also HELP to check commands and example if you are hardware missing you can go on boot RECOVER or try some option if you re-shrink size of disk like me.. thank me later
Most simple of all, enter bios and enable "OS plug and play" to left the os reinstall and correct all drivers related to the hardware. No need format or reinstall all, that's are stupid.
If we are stuck at the blue screen, how do we go the bios settings? You went there in the tutorial and I am clueless where u went? We have a problem and turn to your video, you cant assume we know those advance settings!
From the command prompt everything was going well except that the Regback directory has none of these files. I see them in the config directory and they have data in them but no such files exit in the regback dir. What could be the problem??
Can't get to the first auto repair screen, it just stays preparing auto repair unless I spam f11, which makes it load until it blue screens
omg it worked! liked and subscribed :)
I have a question tho. Do i have to delete the backed up files i made? or i should just leave it as is?
Thanks a lot, i was able to go into safe mode and run sfc scan and chkdisk. These commands resolved my issue.
I was just cleaning my pc unpluged every thing hdd, ssd, ram, cpu and everything and when i assembled my pc and tried to boot i got this error.
Thanks a lot again!
Thank you very much brian.
But i wanna ask you. Is there any impact to our computer if we do these things? Besides our computer being fixed of course.
I mean is that any impact like our laptop become slower in response or any other impact?