Solid Print3D Technical Guide: peel 3D scanner - Part 1: Workflow Tutorial Demo
Vložit
- čas přidán 7. 07. 2024
- Solid Print3D’s Technical Guides: 3D Scanning with peel 3D
In this 2 part series, our Technical Engineers will guide you through the entire 3D scanning process - from part preparation, scanner set up to entity creation and streamlining your CAD modelling.
Part 1:
We’ll be taking you through the peel 3d scanner workflow, including:
- Part preparation
- Set up of parameters
- Scanning
- Mesh cleaning and editing
- Entity creation for reverse engineering
Watch out for part 2 dropping, we’ll deep dive into how you can use the entities created in Part 1 to streamline your CAD modelling, making the reverse engineering process as smooth and painless as possible!
peel 3 3D scanner ➡️ bit.ly/3Kktiqa
Be the first to hear about new Technical content - including Part 2 release - Sign up to our newsletter here ➡️ bit.ly/48uoxUZ
0:00 Introduction
00:29 Physical Features
01:31 Calibration
02:15 Preparation & Set Up
03:12 Peel.OS Workflow
05:47 Peel.CAD Module
07:04 Outro
Contact us ➡️ bit.ly/3zCR4cy
Solid Print Website ➡️ bit.ly/37GOxlY
Follow our Social Media Channels to keep updated with all the latest news regarding 3D Printing, scanning and other additive-adjacent technologies ...
LinkedIn ➡️ bit.ly/3yxbrag
Instagram ➡️ bit.ly/3MbgX6C
Facebook ➡️ bit.ly/39W5ppz
Twitter ➡️ bit.ly/3yvb8gj
Subscribe to our CZcams Channel ➡️ bit.ly/3LfAPUY
#peel3d #3dscanning #additivemanufacturing #tutorial #3dscannerguide #howto #setup #CAD - Věda a technologie