क्लच दबाकर बाइक चलाने से क्या नुकसान होता है |What harm is caused by riding bike with clutch pressed
Vložit
- čas přidán 7. 09. 2024
- The Clutch is a mechanical device and it is responsible for engaging and disengaging the engine crankshaft with transmission gears.
The basic job of the clutch is to temporarily disconnect the engine from the transmission and drivetrain system which drives the rear wheel. Unless that happens, it is nearly impossible to mate an idling engine with the transmission and move a geared motorcycle, which is at a standstill, forwards. It is possible to shift gears without the clutch when the bike is moving, but the result isn’t always smooth and if performed incorrectly, the grinding can even damage the gearbox for good.
What is Clutch? | Types, Components and Requirements in Hindi : • What is Clutch? | Type...
How a Single Plate Clutch Works? : • How a Single Plate Clu...
How Multi-Plate Clutch Works? : • How Multi-Plate Clutch...
What is Cone Clutch? | How Cone Clutch works? : • What is Cone Clutch? |...
Centrifugal Clutch - Working Principle , Components, Advantages and Disadvantages in Hindi : • Centrifugal Clutch - W...
The lever which is pulled by your left hand is connected to a circular clutch assembly, which sits closer to the engine, via a cable or a hydraulic system. The assembly consists of a pressure plate on the outermost side which faces the engine cover. As the name suggests, with the help of springs which are bolted on the outside, the pressure plate acts like a lid which pushes in and pulls out to compress and decompress the “Clutch Pack“. This pack consists of a series of friction and steel plates which are placed alternately and have teeth around their outer and inner circumference respectively.
These plates are closely stacked together, where the teeth of the friction plates interlock with the slots grooves on an outer basket covering the width of the entire assembly. The steel plates which are placed between the friction plates interlock against the grooves on a smaller inner hub, which has a smaller diameter than the outer basket and is placed inside, adjacent to it.
The outer basket is lined with toothy gears along its circumference, which is connected to and driven by the engine’s crankshaft. The inner hub is splined on the transmission’s input shaft and rotates along with it. When the clutch lever is out, the fully compressed springs on the pressure plate sandwich everything together. As the steel and friction plates are pressing against each other at this time, the rotation of the friction disc results in rotation of the steel disc and vice-versa. As a result, power is transferred from the engine to the transmission.
When you pull the clutch lever in, the action causes the compressed springs on the pressure plate to retract. As a result, the friction and steel plates which are forced together separate and begin to rotate independently, disconnecting the engine from the transmission system. If you’ve ever experienced that the clutch lever is hard to pull in on some motorcycles, it is because the pressure acting on the external plate is increased to enhance the clutch’s ability to handle engine power. It is one of the alternatives to using a smaller clutch assembly with many plates or a larger assembly with fewer plates.
#MotorcycleClutch #BikeRidingTips #ClutchWorking
The wait is finally over. I am here with CZcams's very first Mechanical Engineering Channel in HINDI.
In this channel i will upload videos related to mechanical engineering topics such as Automobile, Production, HMT, Thermodynamics, FM, CAD/CAM etc.
So subscribe my channel and learn everyday
Follow me on twitter: ⤵
/ dashingdanish11
Add me on Facebook: ⤵
/ danish.ali.754
Follow me on Instagram: ⤵ www.instagram....
Contact me: ⤵
mechanicaltechhindi@gmail.com
Sir kai bar bike ko sirf clutch dabakr and accilator ko zero Kar ke Chane se nuksan Kya hota hai is topic pe Video banao na please sir
Hmm iss pr video bomb
Ha ye thik hai banani chahiye
Sir...clutch full daba ke gadi chalai to kya nuksaan hoga..kyo ki mai full clutch daba ke chalata hu..jab bhi mai utaar pe hota hu...please reply..
Bhai ye topic pe video dudte hue yha tk pahuch gya
Bhaiya aapke explain krne ka tarika kisi v chezz ko best hai
Big fan of ur knowledge and way of explaining
👍
बहुत अच्छा भाईसाहब धन्यवाद, आपकी व्हिडिओ अपने भारतीय जनता को बहुत ही जानकारी प्रदान करती है
👍👍
I have habit of long pressing clutch when I approach a signal or traffic jam or while descending flyovr, slope to increase the speed. But I don't accelerate when I do this. Is this correct?
Aapne bhut acche se samjha dia
Thank u 😊
Welcome
Aise hi general videos, regarding working mechanism of bike daalte raho...taaki bike k har component ki working aur uska kaise take care karna hai..hum seekh sake.
Thank u
👍👍
I always use clutch during downhill in that case I feel bike very light and can press break when required easily. Second when I need to increase speed then I first i pres clutch & then after 3 second release it then after I accelerate the speed increase with powerfully.
Same bro
Sir you deserve more than milions of subscribs .
Your vidious are excilents
Sir you makes very good video with action. Please sir about Engine , Hydraulic system i request make a video.
👍
Agar bike ko ek baar 40-50 kmph ki speed accelerator se de di jaye or fir clutch pura dabaya jaye tab to bike apne aap free hokar chalti rhti h bahut door tak
Or aisa baar baar karke bike chalana kya sahi h ya galat h
Pls reply...
Even I do the same
Main apna tempo lagbhag 10 minute tak clutch me rakha aur clutch khrarab ho gaya. information dene ke liye aapka dhanywad.
sir yaise hi basic basic concept pai video dalte raho hum aapko pura support karenge
👍👍👍
VERY GOOD CONVINCING STYLE SIR. MANY MANY THANKS.
Vese sar ji apse ak questions he ki app koi teacher ho ya nhi agar app teacher ho to you are best teacher 😍
Thanks
Waise mai sirf you tube pe video banata hu alag se padhata nahi hu
@@MECHANICALTECHHINDI apki to gov. Teacher ki job honi sahie because you are best 👍
Sir your voice& talking style is so nice
👍👍👍
Ghanta
Great sir thanks
Welcome
Sir you good lecturer your lecture is very best for all new students and all mackanic thanks sir
Gadi speet me rahe waqt khlach daba ke rakh te kya akxiletar nahi dere jese ke nutal bhi kar sakte kya
Sir mera Suzuki gixxer he 104 se upar speed nahi jata naya mibil clutch plate even new block vi he aur air filter vi chain spocket vi phir vi 104 se upar nahi jata??
Sir gadi chalana kaise sikhe is par bhi kripya video banaye..
Very valuable information shared
Good sir
Thanks so much information about
Main aapka video assam se dekha so bahut achchha jankari hetu bahut dhanybad
😊👍
Kya bike ko newtone Mai rakh Kar agar hum accelerate da toh Kya bike ka engine ka life Kum ho jata hai..##
सही बोल रहे हो भाई मै तो सिर्फ गियर चेंज के लिए बस कलच लेता हूं कलच दबाकर सिटी मे भी नहीं चलाता हू जब गाडी में 5 गियर है तो किस लिए है इसी लिए दिया जाता है कि जैसी रोड वैसा गियर । 2 नंबर गियर मे चलाये और जब गाडी खड़ा करना है तो कलच लेले और तुरंत न्युट्रल करे गियर से
Sir mai mechanical engineering krr rha hu aur jitne bhi device hai ya parts hai uske study krta hu lekin mujhe kbhi uska mtlb hi smz nhi aata kyuki sirf teacher theory hi pdha ke nipta hai dete hai kbhi uska brief nhi smzate works kesa krta hai lekin aapke videos dekh ke saari chize samz Mai aajati hai you are doing great job sir lekin hamare education system Mai esa Kyu nhi padhaya jata sir aap sir teacher bnn jao sir bahut hi madad milega issse bccho ko ya phir CZcams pe hi topics cover krna chalu krdo sir for example internal combustion engines ke topic etc etc plzzz sir 🙏🙏
Aapko mere channel pe bahut sare videos mil jayege
Thanks for appreciating the work
Big fan sir 🙏🙏🙏
Your all videos are very usefull
Thanks for us😊😊
Sir mere pas honda shine 2011 model hain aur mujhe 2019 model ke body graphics lagane hain market main available honge kya? Price?
Aapka Sabhi Videos Knowledgable Hai. Main Abhi Ek Electric Bike Kharidna Chahta Hoon.so Please Iske Upar Ek Video Banaiye sir
Very very informative video....Keep posting such videos
Aise hi common topics pe video bnao sir.
Okay 👍
You make understand people about bikes accessories very well.♥️♥️👍👍
Jaha par dhaal rahe waha bike band karke 4nambar me lagakar cluch dabakar chala sakte hai ya nahi
Nice and useful
Nice sir and thank you video banane ke liye❤️🙏
Bike ko 50-60 ki speed me agar bina race diye clutch daba kr chalaye to kya clutch kharab ho sakti hai....?
Thanks thanks thanks 👍👍👍 👍👍 👍
Apne Bohot Acche Se Explain Kiya.
Ap Kha Se Ho??
Thanks you so much sir....all. Wells vedeo
Bike ride karte time road ka structure down ke taraf hoga to down jate time clutch pakkad ke rakna hoga ya nhi
Pakad ke rakhna sahi hai
Sir clutch pakkad ke rakhege to khrab to nhi hoga na
बिल्कुल भी क्लच को नहीं पकड़ना है भाई गियर में ही गाड़ी चलाना है भाई क्लच का जो काम है सिर्फ गियर बदलने के लिए है या फिर जब खड़ा करना हो तो clutch ले लें फिर गियर से हटाकर न्यूट्रल करें आप यह समझ लो clutch का काम सिर्फ गियर को चेंज करना है अगर आप ढाल में गाड़ी चला रहे हैं तो कोई बात नहीं गियर में चलाइए जब जरूरत हो स्पीड के हिसाब से गियर बदलते रहिए
@@amritdblvizag252 bhai agar hum neche k liye ja rehe hain Kia hum neutral mai chal sakte hain bike band kar k
Kindly use Animation description sir..
For better understanding
Bhai shine 2016 model 38000 km or activa 2014 model 50000 km. Konsa oil Dalu plz batao. Mai service 6month 4k/5k KM ke liye karta hu.
Very useful information, sir.
All the best.
भाई आपके videos बहुत informative हैं आप सभी कॉन्सेप्ट्स बहुत आसान शब्दों में समझा लेते हो, मेरा एक प्रश्न है मेरे पास आल्टो k10 है मैं ये जानना चाहता हूँ कि क्या हमें car या bike के बाकी सभी पार्ट्स की तरह एक निश्चित समय के बाद कार की क्लच प्लेट्स change करवानी चाहिए? अगर हाँ तो हमें कितने समय के बाद कार की क्लच plates normally change करवानी चाहिए?
बहुत बढिया जानकारी भाई जी 👍❤️🥀
Sir pick up thoda Kam ho gya hai .awaj bhi jyada hoti hai. clutch plate change Kara let kya
sir please make a video on changing gear what happen inside the gearbox during changing
sr klaj pakdke breik kre to shi he ya glat he
I have one question, will it affect if I am going down hill at some considerable speed and press clutch so that I can release throttle and cruise the bike.
same question I have!
Same I have
Same question
I every time press clutch during downhill and my bike sound decrease and after downhill I release clutch then it speed goes very very smooth..Also sometime when I need to increase speed high the for few 3 second I press clutch and relaese it then I increase speeding I feel very good & give power to bike to increase speed. M I right if not what happens if I m doing it mention it's disadvantages.
I also have same question..
Waah sir ji wonderfull knowlege 👍👍🙏🙏
😊👍
For Downshift, is it necessary to press clutch??
Sir agar bike off hai to 1st gear daal ke start kar sakte hai
Slope pe running position me agar engine off karde or clutch dabaye... to kya hooga
Bike ka battery rectifier ya charger kharab kaise hota hai... or bike ke spare part online kaise or kaha milenge
Thank u sir samjaneke liye
Thanks for information bro 🤗🤗🤗🤗
Sir Maine bhi ye baat note ki hai.
Ager 70 speed ma ma clutch daba ka raka air acclator ko zero rakha to koie nuksan ho skta ha
Sir TVS victor bike me 30-40 ki speed me bike bhut smooth chlti h...isse jyada yadi bike ki speed 50-60 km/hr bdhao to carburator fuel supply ko brack krne lgta h....problem kese thik kre plsss help..
Carburetor tuning
Mera v hota tha par hum spark plug new lagaya to sahi hogaya
Nice Information 👌
👍👍👍
Sir sir😀😀 ,agar gadi speed me hai or without exeileter mode clutch dabaane se, problem hai kya, please, reply..
Aap apne mic ka volume thoda increase kriye
Love, you bhai
👍👍
Hello Sir passion pro Bike Gear Oil Dal sakte ki nahi.
Or passion pro Bike 1savri me 70 ka mallage deti he Aur 2 savari me 40 ma deti he kyu 50-55 ki speed me
Sir crankshaft aur uska kharabi keupar ek video banao
Nice sir
👍👍👍
sir merI bike honda shine 2010 clutch plate ,clutch hub center lagaya he par bike ka speed condition ma nahi he. ? speed be skulatar dabaniki thorider bat deta hi. kya he sulation sir ?
Bahut achcha bat btaya apne
sir please thermal engineering, thermodynamics, and manufacturing ke campus interview question ke pdf share krdo, please urgent hai
Ok
Konsa company ka gadi he jyada mailej aur long time tak good condation me rahega gadika not bolt automatic dhila nahi hone wala gadi konsa lena thik he 125cc or 150cc me
Thank you so much bro❤
Thank you for all information
sir clutch dabakar 1 time Mai 4 ghear dalane se kya hoga
meri bike passion pro hai 2010 lekin oil 2500 kmpl ke ander Khatam ho raha hai kay kare
Sir mein downhill per bike ka clutch dabakar chala shakata hoon kya.kohi problem to nahi ayegi na
Very good
👍👍👍
Sir pulsar ke engine ke bare me log bolte hain ki jaldi aawazein aane lgti hain. Engine jaldi kharab ho jata hai. Please Aap btaye kya sahi hai. Ya to is topic ke upar ek video bnaye.
Okay
very good noleg...🙏
Speed bracker me, byke 3rd giar me bhi par ho sakta hai but thora sa clauch dabana parega. I want to know, esi bajay se engine ka loksan hoga kea ???
Nice video sir
Excellent 👌👌
In off-road what would be the clutch position??? Half clutch or by releasing full clutch???
Thank You So Much Sir🙏
Welcome
Agar chalti gadi ko speed dekar bad main kuch duri ke baad clutch fully dabakar rakha to gadi ka speed badhta hai aur aise kuch duri tak gadi chalayi to isse clutch ko problem Ho sakta hai kya sir? To kaise?
Thanks Sir Ji 🙏👍👌
Yamaha ki VVA technology ke baare main information chahiye,kase kam karta hai?
Okay
Mechanically demo ke saath hoga to accha hoga.
Gr8 thanks
Thanks sir good knowledge
👍👍👍
Sir ap most comfortable Bike in 100-150 CC me banaiye..Jinki lower back ka problem hai... Plz.
Thanks for this topic
Jb utrai m chla rhe ho to gaadi gear main hain tb clutch dwa skte h ya nhi ...plzz reply sir
bhai r15 v3 ko kaise achhe se care karein uss pr ek detail video banoo n......
U can use half clutch on 1&2 gear.. Bt above that u should not use half clutch..
Above 40 humlog full cluch leke chala sakte hai kya..?
Hi
I have Passion Pro BS6 (Drive only 500km) .
I'm facing gear stuck while shifting gear. Please suggest How to fix this problem.
hero soroum m le jao
baik ful spid me he 4 ger pe gadi chal rahi he or rasta dhad ka ho to kya chalaj daba k ja saktye he janab?
Petrol ⛽bhrvate Samay nozal 🪠pura under dal dete jise tank me dent ,🔍 screch pad jate he .
To jo petrol tenk ke hol⚫ he Kay usame koy sptey 🧿geujut he esa koy.... Ya firr Kay kare
Bhai sport bike rev matching se fayde or nukshan kya hai usper video banaye kyuki me bike ko highway pe slow down karne ke liye engine bracking ka jyada use karta hu or highway pe overtake karne ke liye rev matching ka
Bhai kache road khadi pahadi me Bina clutch k dabaye bike nahi chadati to iske bare me batayenge???🙏
sir hum 80.100 ki speed mae agr bike chla rhae hai...ush beech hum nae clutch pura dabba lete hai ...chlti hui bike mae to koi nuksaan to nhi hota na bike ko?
Radhe Radhe Radhe Radhe Radhe Radhe
Nice
👍👍👍