Shearing Machine! Finger seals & oil change!

Changing injector seals and oil in a hydraulic shearing machine is an important maintenance task that should be carried out periodically to ensure the proper functioning of the machine. Here are the general steps to follow:
• Preparation: Before you start, make sure you have the necessary tools and equipment. You will need an adjustable wrench, a socket set, a drain pan, new injector seals and hydraulic oil. Also, ensure the machine is turned off and the hydraulic system has cooled down.
• Drain the hydraulic oil: Place the drain pan under the hydraulic tank to catch the old oil. Locate the drain plug or valve on the tank and remove it to let the oil drain out. Ensure all the old oil is drained out by tilting the machine and removing the drain plugs in all the hydraulic cylinders.
• Remove the old injector seals: Locate the injector seals. Remove the retaining screws, and use a pry bar or screwdriver to pry the old injector seals out of their housing.
• Replace the injector seals: Clean the injector seal housing and insert the new injector seals, making sure they are seated properly. Replace the retaining screws and tighten them securely.
• Refill with hydraulic oil: Fill the hydraulic tank with the recommended amount of hydraulic oil, according to the manufacturer's specifications. Turn on the machine and let the hydraulic system circulate for a few minutes, then check the oil level and top up if necessary.
• Test the machine: Turn on the machine and test it to ensure that the hydraulic system is functioning properly. Check for leaks and make any necessary adjustments.
By following these steps, you should be able to change the injector seals and oil in your hydraulic shearing machine. However, if you are not confident in your abilities or do not have experience with this type of maintenance, it is always best to consult a qualified technician or the manufacturer's instructions.
#youtube #machinery #shearingmachine #EducationHub189

[@firojalom4194]

ভাই স্পিং বেস প্লেট ফিটিং