Mercedes / Dodge Sprinter High Pressure Fuel Pump Replacement ( Step by Step Guide ) OM642 Sprinter
Vložit
- čas přidán 5. 12. 2023
- in this video I'm gonna share with you how to remove and replace the high pressure fuel pump on a Sprinter van with a 3.0L Engine! Enjoy! #sprinter #sprintervan #dieselengine
- Auta a dopravní prostředky
It would be good to note precautions such as cycle the ignition a few times to prime the HP pump so it does not start dry, keep the fan/clutch vertical, do not lay it flat when removed from the engine.
@sunlite8934 Good!
Fan should be electric ? Only oil clutch needs to be vertical 🙂
But if i buy new clutch how does it survive shipping?
Hi. Thank you for the video, i have been looking forward to this. Shame you did not make a video of your diagnostic procedure.
@Nick-bp7jf My Pleasure! I lost half of the diagnosis footage! that's why I didn't include it in this video!
Do you have another same-style video to point us to pls for the diagnosis? @@KITS_Auto_and_Truck_Repair
Thank you very much 🤝
@gennadiiosypchuk5974 My Pleasure!
silicone grease is best for Orings; all petroleum grease will weaken the Oring
@hypocrisyrules Good!
I gotta 2016 Mercedes Sprinter it has fuel leak i cant see where is leaking from when i changed fuel filter i noticed that lot of fuel on the bottom of the fuel filter housing you think this might be fuel pump or the fuel lines ?
@dnrtrucking4437 it sounds like one of your fuel lines is leaking!
A few days ago I was contacted about a 2012 Sprinter with a crank no start and according to the owner the van just died inside a filling station and never started again.
I had no experience with diesel at all but fortunately my scan tool is capable of doing this particular Sprinter and I read several faults from different modules but the ones that keep coming back in the engine ECU are 11AF00, 13AF00, 11D000, 11D900, and 16A600.
I have no idea whether these faults may cause a no start problem. Hope you could guide me.
@sagiriliyasuadamu3341 check fuel pressure!
Thanks for the prompt reply. Actually I was called in to read fault code as someone was working on the van and he has no scan tool.
The owner asked me if I can take over the job but I told him I will have do some research on the truck.
I think the mechanic has no such tools and I only have fuel pressure gauge for gasoline engines, do you think that will work on diesel engines?
I just learned from your videos this truck has a high pressure fuel pump so I think my scan tool can give me info on the high pressure fuel pump PID just trying to get enough info before getting back to the truck.
Thanks once more
Do these sprinter vans have a lot of issues, or maybe just they tend to have high mileage like this one? I see your working on them a lot.
@heavyeagle2371 Yes! we work on a lot of Sprinters!
Hi can we see the confirmed fix what was pressure before and after pump replacment
@northernpatriot9078 I Lost some of the footage while making this video! This is a R-R Video! I hope I can redo a Diagnostic video on this issue soon!
Sr how you are doing? I have a question for you have you ever replaced this, Valve Cover Membrane Diaphragm Mercedes OM651 2.2 CDI 6510109118, 6510100630. crankcase ventilation system.
@ramonmirabal101 I'm Good! Yes!
Sr can you please tell me where I can get that part I went to Mercedes and they don’t have it, I would really appreciate it if you can help me in this one. Have a very nice day.
Where is yr shop
@bobbythompson17 Our shop is located in Dickerson md, You can email me at kitsautoandtruckrepair@gmail.com for shop info!
Now I know why every mechanic has pink nail varnish in his toolbox😂
@the_bloke_that_cuts_the_grass There you go! HAHA
You forgot the most important thing …lol….how to diagnose it was the pump …including the oscilloscope diagnosis….lol
@cesarcantoral6100 Lol! I lost the diagnosis footage! I'm sorry
What are the possible symptoms or signs before replacing the high pressure pump?
@@user-iz3fx5qu5n One of the symptoms is low rail pressure, this HPFP wasn't building enough fuel pressure, the concern was crank no start!
@@KITS_Auto_and_Truck_Repair is there a way to physically test high pressure how many bars was that and you measured high pressure side with scan tool right?
Vous parle creole ???
@cesarcantoral6100 Non mon ami! jr parle francais!