Electric scooter Zero8 water proofing
Vložit
- čas přidán 12. 09. 2024
- Diy water proff for zero8
this video is all about DIY if you have suggestion of idea please comment below
Scooter Specifications:
Make: Zero
Model: 8
Motor: 500W direct drive; rear
Battery: 48v 10.4 ah lithium ion; 499 wh
Charger: 2.0a, 1.2 lbs
Tires: 8.5" air front, 8" solid rear
Suspension: Dual
Weight limit: 220 lbs
Scooter Weight: 38.3 lbs
folded (LxWxH): 37x7x15 inches
Unfolded (LxWxH): 40x23.5x35 inches
Deck Height: 7 inches
Deck Clearance: 4.5 inches
Deck Dimensions: 18.5x7 inches
Handlebars from deck: 28.5 to 39 inches
Handlebar Rotation: 60 degrees
Handlebar Width: 23.5 inches
Make sure to also fold the scooter when doing this. I found that this will come right off if you haven't left enough room for the fold. Thanks for the vid!
Who can tell me what the code is in Zero 8? Before reaching the settings ..
Sir, pwede rin ba lagyan ng sealant yung hub for the same purpose?
i suggest dont.. hub is sealed already,
Sir next review handle bar shake prob. Ty
Do you know why all of a sudden my rear tire is shooting up water when riding on wet ground? I've had the zero 8 for months and never had this issue. My leg gets soaked within seconds.
JayVisionary Hi Jay. I hope you using the lomger fender which came with the 2019 model of Z8. since the default fender is 5inch only 12oclock can be covered it will be prone to water canons. but if you have the longer fender that stretch upto 9oclock there will be less water on your legs
Boss balak ko bumili z8... Kaso sabi Mahal dw replacement batt nyan... Magkano kaya batt nyan?
migh cost 15-20k but i suggest get brand new Unit . Mine lasted 2565Km and still alive today. i guess the OD meter is now 3.5k
Sir di ba pwede sa loob maglagay ng sealant?
Oyo Marcelo aroung the cover . but sa loob wag unless sure ka
wtf is that language spanglish with ??
hahahah yes, it´s a mix between English, Spanish and I don´t know which language else haha, he´s saying... "ok we´re going to put some silicone here pero esto eeee not too much because its peligroso and we don´t want to sadsasddsada ok? "
I just kidding, good video, but try to speak in English, sometimes is confusing.
It's tagalog and English
Pede na siguro yung glue gun sir?
reinier santos hi. Not recomended since gluegub wont last longer that Silicon
Would be nice if you just spoke english. Most ppl dont speak taglish bruv.
Roar Mavic Pro will try that next time. i ran out of english words
@@sirdiyreviews4148 Great :) What things did you do to water proof it ? I see you sealed around that one cable, but have you done anything else ?
sealant but sadly it solidified
Just curious. Why associate your name with "sir?" Feel elated when people addresses you sir?
Filipino ways
@@GoldenRNB no, only a few of them, like this one.
@@bosspatis369 obviously you don't get it
Taena bat ang daming dislikes? Hahaha okay naman ah
not sure, it's ok, today most users got the idea and putting silicon on their scooters. when this video was created its just a myth