Video není dostupné.
Omlouváme se.
Master Your Stahls' Hotronix STX Auto Clam Heat Press: A Step-by-Step Startup Guide
Vložit
- čas přidán 15. 08. 2024
- Welcome to your comprehensive tutorial on how to get started with your new Stahls' Hotronix STX Auto Clam Heat Press!
🔥 What You'll Learn:
- How to correctly power on and set up your heat press.
- Detailed steps to adjust temperature and timer settings for optimal results.
- Tips on setting the correct pressure and using the interchangeable base plates to accommodate different garments.
- Troubleshooting tips and how to contact support for any pressing issues.
📞 Need Help?
If you encounter any problems or have questions, don't hesitate to contact Velflex for expert support and advice.
Check out these other handy STX specific videos:
• STX 16x16 In-Depth Review - • Hotronix STX Auto Open...
• Calibrating Temperature and Pressure - • Calibrating Temperatur...
• General Maintenance - • Clam Press Maintenance
⏱️⏱️VIDEO CHAPTERS⏱️⏱️
00:00 - Intro
00:17 - Turning on and power requirements
00:25 - Set temperature
00:38 - Adjust timer settings
00:55 - Standbye Mode
01:10 - Set pressure
01:36 - How to interchange base plates
01:58 - Start decorating
02:21 - Manual release
02:38 - Conclusion
👍 Like, Subscribe, and Follow Us for More:
Stay tuned for more tutorials, tips, and tricks in garment decoration by subscribing to our channel and turning on notifications!
Happy pressing!