Hello viewers , I am just here to give my review. I just tried this beautiful DIY and it came out amazing. The only problem for me was that when I popped the balloon the shape of the tissues were spoiled too probably because I let it dry for 3 hours only But I just blowed up another balloon inside the tissue because the shape wasn't spoiled alot and the stand came out very pretty So all thanks to this video of this beautiful showpiece.♥️😊
I'm making this pretty moon light right now, it's so so so awesome especially the stand and it's very beautiful 👌👍 thank you a lot for this amazing craft 💖💜
Glue + water thickness matters here .. If the mixture is so watery balloon won't get sturdy.. don't worry .. you can solve this by adding extra layers of tissue to get sturdy moon shape.. you can reuse the spoiled moon shape .. Insert a new balloon into the spoiled moon and blow the balloon.. now you can make other 3-4 layers out of tissue papers ... let it completely dry .. you will get fine moon shape..
If the shape is spoiled, then by using the balloon technique, like blowing it inside the moon ...do we again have to keep it for drying for 24 hrs after applying layers?
@@shinobu_the_butterfly yeah dear .. normal string lights usually get hot when they use for long hours... I think it's quite normal .. cork string lights won't get hot that much .. but it will give low light only..
Di can you tell me when we will make this moon that time tissue will going inside so di what we will do tell me please reply me please please please 🙏🏻🥺🙏🏻🥺🙏🏻🥺
guys i realy dont know whats wrong but the balloon has like popped about two times while i am applying the tisssue paper ,so please tell what i am doing wrong
It will give same effect .. but make sure that you are adding enough layers .. if it is too thin add 2 -3 layers additionally.. and add little more glue than water ..
May be your glue mix is watery or you stick less tissue layers .. we can Recorrect it .. try this 👇 Take the balloon out .. insert a new balloon in flattened tissue ball .. blow the balloon so that it comes to the shape and then stick two layers of tissue paper.. make sure the glue is thick enough.. let it dry ..
Dnt worry dear ... minimum 5 layers of tissue will make it sturdy .. make sure that glue & water mix is not so watery .. You can reuse that spoiled moon ... Insert the baloon inside the moon and blow it .. & then stick two more layers of tissue paper..
Hello viewers ,
I am just here to give my review.
I just tried this beautiful DIY and it came out amazing. The only problem for me was that when I popped the balloon the shape of the tissues were spoiled too probably because I let it dry for 3 hours only
But I just blowed up another balloon inside the tissue because the shape wasn't spoiled alot and the stand came out very pretty
So all thanks to this video of this beautiful showpiece.♥️😊
😻😻 awesome .. happie to hear that yours turned out well ..
Aapne fevicol use kia tha??? Tissue paper stick krne k lie..balloon k upr
Came to see diy moon
But got very impressed when I saw diy stand too
😍😍 thank you so much 🥰🥰
Semma.... Moon light idea super.... Adhum stand idea excellent..... 👍
Thank you so much for making this video 😢 I've been trying to find a perfect diy product for my school project and this is it🎉
Thank you so much ☺️
Wow this is awesome! Very creative.
I May do this myself, thanks for the tutorial!
very interesting video
برفوووو عليكي استمري ربنا يوفقك
Beautiful art craft.
TRIED ONE WITH coloured silk paper used yellow and a white with sparkles..used battery operated string mini lights came out gorgeous....
Awww 🥰 happy to hear this .. thank you so much for commenting ☺️
this moon lamp is very beautiful and very easy thank you👍
All ur works are awesome
Vera level -U hav a great talent , I wish u to reach more success
I'm making this pretty moon light right now, it's so so so awesome especially the stand and it's very beautiful 👌👍 thank you a lot for this amazing craft 💖💜
Thank you so much ☺️
Es increíble yo ya tengo la figura echa con el soporte y todo solo me faltan las luces no las tengo :(
Ma shaa allah... 👍👍👍
Wow it's easy and beautiful 😍
Thank you so much 🥰
Maasha Allah👌👌
M A R A V I L L O S A A A A
GRACIAS POR COMPARTIR !!!!!
Thank you ☺️
Amezing... beautiful 👍👍❤️
Thank you so much 🥰
Wow😍 very easy DIY 👏
Beautiful...
Very nice and thank you for this idea
Thank you so much 🥰
Super interesting.
Thank you so much ❤️
Awesome 🎉!!
Fabulosos
Thank you so much ☺️
OMG! Wow
Thank you so much 🥰
Supper chechii😍 do some more like this... Very interesting
Sure dear .. thanks for watching ❤️
Chechii meaning??
@@bunnyyt6770 sister
@@lathak783 OK❤️
Love from pakistan
Thank you so much dr .. ❤️
return love from india ..
Masha Allah...superb.
Nice and gorgeous . Like it very much
NYC bro 👍
Its very awesome 👌👌👌
Thank you so much 🥰
Looks great! Thankyou for sharing.
Thank you so much 🥰🥰
@@letsdocrafts3307 🥰
Great...especially the stand 👌👌👌
Thank you dr
Waaaaow
Thank you so much 🥰
Mashaa allah....😍
New subscriber now love your videos ❤️❤️💕💕
Thank you so much for your support ❤️
Wow what an idea sema ma apadiyae moon ah Kaila vachykitu Iruka madiri iruku real ah awesome work dear 😍
Good job🤩🤩🤩
Thank you so much 🥰
Wow! Moonlight super asusal rocking dear😍
Beautiful 👏👏👏👏🤜🤛❤️
Thank you so much dr ❤️
Very cool! ☺️🙏✝️🇺🇸
Awsome
Baloon foot jaye to😲
Itna dimag late kahase ho bhai it's just amazing
Supper
Thank you so much
Oye sabes como se llaman las lucesitas
Super
Nice
Please can you explain a little on how you fix the light
Is the light powered by battery or there's connection to the electricity to power the light
❤
♥️
Thank you😍😍😍😍♥️♥️♥️
Actually it's very good but how to light it's only half to represent as moon.
You can add any remote controllable lights or string lights .. I actually add a string light at the end ..
@@letsdocrafts3307 thanks
WHAT KIND OF DECORATION LIGHTS
Any kind of string lights .. easily available in online and craft stores ..
Can we use other kind of paper instead of tissue?
Yes you can .. use white paper for a neat finish ..
@@letsdocrafts3307 thank you so much
Bro thats like Mercury
Yeah you are right 😅
Can I use only 1 led light..?
Yes you can
Poi quando devi sostituire le batterie smonti di nuovo tutto
You can fix the head part(battery ) outside ..
Hi
My balloon did'nt came out perfectly
Can you please tell me how to do it plz....
Glue + water thickness matters here .. If the mixture is so watery balloon won't get sturdy.. don't worry .. you can solve this by adding extra layers of tissue to get sturdy moon shape.. you can reuse the spoiled moon shape ..
Insert a new balloon into the spoiled moon and blow the balloon.. now you can make other 3-4 layers out of tissue papers ... let it completely dry .. you will get fine moon shape..
@@letsdocrafts3307 Ok
Thank you😊
How many layers of tissue we have to use??
As much as you want depending on how thick you looking to make it
😍😍 yeah and also it’s based on the thickness of the tissue paper ..
@@letsdocrafts3307 thank you sis
Btw I have make it and it turns so good 💯😊❤️❤️❤️❤️✨
Hey it's paper so won't it burn due to the heat if not I'll def try
It’s based on the light you use .. if the light produce too much heat then don’t use that .. mine is not much hotter..
🌑🖤👌
😍
Thank you so much 🥰
If the shape is spoiled, then by using the balloon technique, like blowing it inside the moon ...do we again have to keep it for drying for 24 hrs after applying layers?
Yes .. give it proper time to dry ..
@@letsdocrafts3307 ok
Can i make it with latex balloon?
Yes you can
Can we do it with news paper or has any side effects
Yes dear you can make it with newspaper too.. but the result will different .. you can paint it white colour .. or choose any different colour ..
se deja secar cada capa'?
No .. dry after all the layers finished ..
How many hours do we have to let it dry???????
24 hours
No sound
Is it necessary to use cardboard sheet inside popsicle sticks? Please tell.
It's not necessary dear .. if we use cardboard it will give strength to the stand ..
Cool but can u give link of those lights
www.amazon.in/dp/B0916KN8Z1/ref=cm_sw_r_cp_apa_glt_fabc_2KQJRHX6DJWM9TTRKKYF?_encoding=UTF8&psc=1
What's the white thing u apply with a brush
glue
And mix it with water
Mam apne light kaise jalayi
How long does the tissue take to dry?
Let it dry for 24 hours ..
What type of glue u use
Can i know
Normal white glue.. fevicol
How to make gluee
What is the name of the type of lights you used to illuminate the lamp?
I used normal string lights .. you can use wireless lamp with remote controls .. easily available in online ..
@@letsdocrafts3307 dose it not get hot? I have bought many string lite but they all get hot after lighting for a while
@@shinobu_the_butterfly yeah dear .. normal string lights usually get hot when they use for long hours... I think it's quite normal .. cork string lights won't get hot that much .. but it will give low light only..
Can we color it with white acrylic paint?
Yes you can color it with acrylic
@@letsdocrafts3307 okay...happy crafting😀
Will the string light loose its charge fastly
Yes if it’s lighten for long time batteries will drain ..
hi...can u say what type can lights we use for this diy?
Normal string light ( warm color ) available in craft shops .. or you can use remote controlled led lights available in online and shop too ..
Di can you tell me when we will make this moon that time tissue will going inside so di what we will do tell me please reply me please please please 🙏🏻🥺🙏🏻🥺🙏🏻🥺
Use thick tissue papers .. and add 5-6 layers .. if not sure then ..
add a spoon of white cement with glue mix it will give sturdy finish..
Di we have to put the mixture of cement and glue inside the moon or outside the moon reply
@@letsdocrafts3307 please reply di
How many layers did u made with the tissue
5 layers
ca i use just flashlight it is for my project
Yes use can try it with small flash light ..
how long did it take to dry completely
It takes 24 hours to dry completely ..
HOLA UNA DUDA COMO SE LLAMAN LAS LUCESITAS QUE USAS
Mene jab balloon phara to ussi k sath sara tissue kharab
guys i realy dont know whats wrong but the balloon has like popped about two times while i am applying the tisssue paper ,so please tell what i am doing wrong
Use thick balloon
Can we use newspaper
Yes .. but the colour will change.. it won't be in white..
What if i used only thin tissue does it affect the quality ?
It will give same effect .. but make sure that you are adding enough layers .. if it is too thin add 2 -3 layers additionally.. and add little more glue than water ..
Can you plz tell me the length of the string lights you use?
You can use 3 - 5 meter one .. it will give more glow .. or use other type of remote operated lights easily available in online..
@@letsdocrafts3307 ok thank you so much for reply🥰
HELLO, A QUESTION WHAT ARE THE CALLED LIGHTS YOU USE?
Normal string light .. rainbow color and warm color ..
Paper kaha milaga
Can I use normal paper
Yes you can .. but it will give patchy effect because of thick paper ..
But I have a balloon with a tissue attached so it goes flat, how do I do that
May be your glue mix is watery or you stick less tissue layers ..
we can Recorrect it .. try this 👇
Take the balloon out .. insert a new balloon in flattened tissue ball .. blow the balloon so that it comes to the shape and then stick two layers of tissue paper.. make sure the glue is thick enough.. let it dry ..
@@letsdocrafts3307 okey
Bnn
How to protect it from dirt and debris
Gently wipe off the dust with dry cloth ..
@@letsdocrafts3307 great..thanks
Please lite ka name bata do
Battery operated string lights ( available in online )
How many layers of tissue
Minimum 3-5 layer
How to fix the lights again
Though it’s a cardboard base you can easily remove and fix ..
@@letsdocrafts3307won't it be ruined
It's a plastic balloon???
It's normal rubber balloon..
i've try to make it two times but the baloon always explode 🥹😕
Try with other thick balloon ..
Don't pop it.. instead cut the tip slowly with scissors ✂️ then you will get perfectly
@@letsdocrafts3307 yes i've try it and make it smaller than before, it works! but yeah not that solid
@@ZoyaMuskan-kh4re uh i should've try it, thanks!
Reminds of bts isn't it
I do the same instructions how come that mine is not hard or form like a moon & yourscwas perfect i hope you gave the complete tips.🤦👎
Dnt worry dear ... minimum 5 layers of tissue will make it sturdy .. make sure that glue & water mix is not so watery .. You can reuse that spoiled moon ... Insert the baloon inside the moon and blow it .. & then stick two more layers of tissue paper..
Wow thanks so much for repply i'll try again.goodbless👍😉
Fake