SPEED TEST Printer & Cutter VS Single Printer/cutter Combo

Video of Graphtec FC8000 cutter combined with a HP wide format printer producing full color decals and stickers shows how MUCH FASTER in production than a single all-in-one Roland printer/cutter combination machine. Busting the myth of the all-in-one printer!
Facebook Like Us: / graphtec-america-66782...
Twitter Follow Us: / graphtec
Learn More: www.graphtecam...
Graphtec America, Inc.
17462 Armstrong Avenue
Irvine, CA 92614-5724
Phone: [phone]
Best Cutting Plotter, Best Cutting Plotter Machine, Best Vinyl Cutter, Best Vinyl Cutter Machine, Best Vinyl Cutter and Heat Press, Best Vinyl Cutter for T-Shirt, Best Vinyl Cutter for Sticker, Guide Cutting Plotter, How To Choose Buy Cutting Plotter, Guide How to Buy Vinyl Cutter, Roll Cutter Machine, Cutting Plotter Software, Vinyl Cutter Software, Cutting Plotter Controller, Cutting Plotter and Printer, What is Cutting Plotter, How to install use Cutting Plotter, Cutting Plotter Blade, Vinyl Cutter Blade, Cutting Plotter Driver, Flatbed Cutting Plotter, What is Cutting Plotter, What is Vinyl Cutter, Install and Set Up Cutting Plotter

[@dave_thomas]

This video has got to be one of the most important videos on CZcams if you're on the market for a Large/Wide format color Printer/Cutter system for your business. Excellent video. Lots of great information.

[@cuttingplotter]

Graphtec America appreciates your comment. :)

[@Digitalinkarts]

I went to an all in one cutter. I had the dual print cut in the past. I do not care what you say, The precision of the cut is not there for jobs that require it.

[@nameismatt]

yeah, but when the cut is down to the fraction of a mm then the combi machine probably had the most accurate lineup of the two systems. If have to add all the time i spend lining up seperate devices to get the 4,7mm cute here and the 6,45mm cut there we can easily add 4 hours a project to the seperate machine time!

[@cuttingplotter]

Thank you very much for your comment :)
ADVANTAGES TO USE SEPARATE CUTTER:
- Print heads don’t get clogged or damaged with dust and debris from contaminated
media when cutting on your all-in-one unit.
- Concerning ink jet printers only: for outdoor applications that prints will need to be
removed from the printer and laminated before cutting anyway. This renders the
cutting feature pointless.
- If the all-in-one breaks down, the entire production line goes down with it.
- Separate machines allow multiple jobs to run at the same time print only, cut only, and
print and contour-cut. All-in-one printer/cutter machine tends to be alot slower than a
separate printer and Graphtec Cutter. It can slow down your output by 50% or more.

[@aplixcs]

ESTE PROCESO TODAVIA PUEDE SER MAS RÁPIDO SI EN UN ROLLO IMPRESO PARA CORTAR, SE DEJA QUE LA IMPRESORA AVANCE TRES METROS Y SE COLOCA EL PLOTTER DE CORTE ENFRENTE Y SE CARGA LA PUNTA DEL ROLLO PARA EMPEZAR A CORTAR. EL PROCESO ES 50% MAS RAPIDO.

[@cuttingplotter]

Facebook Like Us: facebook.com/Graphtec-America-667825166737645
Twitter Follow Us: twitter.com/Graphtec
Learn More: www.graphtecamerica.com