RGT EX86100 HEMI Jeep: Sound and Light Controller v7.5 with Quicrun Fusion Support, Winch and More!
Vložit
- čas přidán 28. 08. 2024
- In this video: The RGT EX86100 AXIAL SCX10 Jeep Wrangler clone 392 HEMI V8 gets a HOBBYWING Quicrun Fusion Brushless (1800KV version) combo and sound controller SW v7.5!
Your supplier for the pre assembled Open Source Sound & Light Controller: www.pcbway.com/
More updates in this upcoming software:
- New „#define QUICRUN_FUSION“ option allows to compensate the non linear PWM signal / RPM curve of the Quicken Fusion.
- Non linear curves for steering and trottle allow a much finer steering and throttle control.
- A winch can be controlled by CH 3, controls signals are coming from the sound controller. You can use a modified servo control board as „ESC“ for the winch.
Sound Controller:
Virtual 3 speed transmission: • WPL B36 URAL-375D With...
Flysky support: • The Best Engine Sound ...
Revving sound, Kennwort sounds: • ESP32 Arduino RC sound...
SCANIA V8 Open Pipe: • Worlds Most Realistic ...
Light & sound controller features:
- Sampling rate up to 22’050Hz, instead of 16’000
- Multiple sounds can play simultaneously
- real DAC outputs, no R/C filter circuit required
- the variable speed engine sound can play at the same time as an additional sound with fixed speed (a horn or a siren for example)
- A lot of pre configured vehicles are available
- special sounds included like: „Martinshorn“ fire truck horn, US Police siren, Swiss post bus horn, train horn, car horn, MAN TGA truck horn
- Engine sounds for: Land Rover Defender V8, ford Mustang, Chevy Nova, Dodge Challenger, MG B GT V8, LaFerrari, Scania V8, Ural V8, Kenworth, CAT, Detroit Diesel etc.
- Air brake & jake brake sounds
- Output for vibrating motor, which simulates engine vibrations
- Vehicle inertia simulation (if crawler type ESC is connected to pin 33)
- Virtual clutch, making the engine sound much more realistic (if crawler type ESC is connected to pin 33)
- simulated manual 3 speed, automatic & double clutch transmissions
- The TAMIYA 3 speed transmission is synchronised in software and can be shifted while driving
- Many light functions like headlight, tale light, brake light, indicators, blue light, foglight, sidelights, high & low beam
- 6 PWM RC servo signal inputs
- 13 light outputs
- PWM, PPM, IBUS & SBUS communication, makes it compatible with most common remotes
- The pre assembled SMD PCB can easily be ordered according to: github.com/The...
Banggood Weekly Coupon Deals: goo.gl/D8B1Mu
Banggood Weekly Discount Deals: goo.gl/uGS7Lf
Material links:
- PCB including SMD components assembling: www.pcbway.com/
- RGT EX86100: www.banggood.c...
- HG P407: www.banggood.c...
- ESP32 board: www.banggood.c...
- PAM8403 amplifier: www.banggood.c...
- Speaker: www.banggood.c...
My DIY Open Source Arduino Stuff:
github.com/The...
github.com/The...
github.com/The...
www.thingivers...
github.com/The...
Check out my other RC videos: • Remote control
My GitHub: github.com/The...
My Thingiverse: www.thingivers...
Follow me on Twitter: / thediyguy999
on Flickr: www.flickr.com...
and on Instagram: / thediyguy999
If you want to support this channel:
/ thediyguy999
paypal.me/thed...
#TheDIYGuy999 #HOBBYWING #HEMI
Excellent job! Incredible!
Have you ever thought about installing a sensor on the wheel, axle or engine, to get the real rotation information and more accurately simulate the engine sound? You could interact between how much accelerator you're applying and how much real revs the RC is shifting, so you could more realistically simulate the sound of the engine.
Thanks for sharing the free project with the community!
I'm your fans.....love all you work.....please make setting for Radiolink RC6GS,
Awesome bro 😎 love the sound effects
Thank you. Yes, I think this is my best sound so far. HEMI forever!
That's awesome,cool upload
Thanks
Thank bro for sharing the knowledge.
I have a question about my project, how to set in the program when my ESC set to forward-brake-reverse, it means when the throttle deceleration to zero will be brake the engine.
It is not compatible with this ESC mode. Use a recommended ESC
TOP
Thank you
I see many parts from you and others related to this on Thingiverse, but there is no housing for the most current version of your board - only one for your prototype, do you have any STL somewhere for the ESP32 sound module?
I must add:
This really is a great project, so well documented, so much help in ordering the PCB with the step-by-step manual and I already have 5 of the PCBs incl. SMT in my hands! It took about 2 weeks to produce and only 3 days from China to Germany then.
Thank you so much for this project! I love it!
I wonder whether you have plans for Wifi and/or BT features of the ESP32?
I guess maybe with an SD Card addon the system could be even much more capable and enhanced with a small web interface for configuration on the go? Just as an idea. But after seeing your improvements from the previous version with the nano I guess the next hardware iteration might have all of this ;-)
Thanks for the praise,
Currently I'm not planning to use wireless features. A cover for the bottom side can be found here: github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/Eagle_PCB/SMD/SMDbase.stl
Friend I am building a Lightning Mcqueen at a real scale, I am impressed by your work and I have followed your videos but I still have not been able to understand how to do it, it would be great to have your system in my project, my son would be very happy, please I need your help 🙏🏼
Hey bro have you messed around with gSynth any?
Man, what will you do next?!!
Who knows?
Any chance on helping the Scx24 community? I’d love to have something like this but In a LS v8 sound profile ? And small enough to fit the 1:24
Your project is really awesome. I'm considering using part of your work (generating engine sound) in my project, but I couldn't find under which license this project is?
Could You please specify it?
Just use it, it's completely open source
So, are you using the GT Power Speakers or the Heng Long units?
www.ebay.ch/itm/123532778305
www.rc-modellbau-portal.de/index.php?threads/esp32-arduino-rc-sound-und-licht-controller.7183/post-341137
Stupid lazy question. Do you have a step by step build of the sound and light system?
See:
github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
czcams.com/video/csQgTfxRd8Y/video.html
www.rc-modellbau-portal.de/index.php?threads/esp32-arduino-rc-sound-und-licht-controller.7183/
Thanks man. I asked as I've bought commercial units that are really poor. Your setup is awesome!
Boa noite, eu sei que estou sendo incoveniente, mas ficaria muito grato se o senhor ajudasse no meu projeto, só quero que meu rc faça o som do motor.
See linked documentation.