Nintendo switch lite sound but no picture. Diagnostic and repair

Sdílet
Vložit
  • čas přidán 30. 06. 2022
  • In todays video we're repairing the Switch Lite which came in for the No picture but sound repair.
    If you'd like to book a repair, please visit console-repairs.uk/ .
  • Jak na to + styl

Komentáře • 54

  • @paulrodriguez4334
    @paulrodriguez4334 Před rokem +5

    I appreciate the video it helped me repair the nintendo switch lite I had purchased with broken controllers and the person said they messed up the screen after attempting to fix the analogs I put the main board in a known good housing had same issue sound and no video I ordered the little controllers from digikey they were for nintendo switch but worked fine in the switch lite I need the reball stencil now. I seen a switch for 30 dollars but has a blue screen will look at your videos to see if I can purchase and fix thanks for taking the time to share your knowledge

  • @nicontintas4899
    @nicontintas4899 Před rokem +3

    You have lost the chip, but you have found a new subscriber!! That thing hapens to me every other day mate!! Take care!😂

  • @tiffanydavenport443
    @tiffanydavenport443 Před rokem

    You is the best CZcams channel ever ❤❤❤

  • @TheLifeTerm
    @TheLifeTerm Před 8 měsíci +3

    Awesome!👍 I had this exact problem. I had a bit of a time using my hot air station...a cap moved, and had a hard time soldering it back on. Other than that, it turned out perfect. Thank you!!👍

  • @pedrosolorzano5893
    @pedrosolorzano5893 Před 23 dny

    Good video. Everyone just wants to replace things immediately without doing a little diagnostic work first.

  • @tfbagman7777
    @tfbagman7777 Před rokem +1

    Muchas gracias hermano me ayudó mucho tu vídeo❤

  • @hove131
    @hove131 Před rokem +1

    Hate doing fpc connectors. Been doing a few back light connectors on lites lately.

  • @hove131
    @hove131 Před 2 lety +4

    Working on same thing now. Replaced the backlight ic and the max ic and have had a new connector sitting next to it for a few days going on next which should hopefully restore power to the daughter board and back light again.

  • @josephshatrowsky
    @josephshatrowsky Před 10 měsíci +2

    Hey, my touchscreen stopped working after a reshell but everything else is fine. Any idea what it could be? Switch lite

  • @mosesl7634
    @mosesl7634 Před rokem +2

    I just replaced my joysticks for my lite and one of the safety strip locks broke should I take it to the shop

  • @sebaneamin6187
    @sebaneamin6187 Před 7 měsíci

    You are the best :)

  • @Gameboy-qn8nu
    @Gameboy-qn8nu Před rokem +1

    Hello, would you what is causing my screen showing flickering rainbow colors? it will disapear and then it recur again.

  • @kathydelk8699
    @kathydelk8699 Před 11 měsíci +9

    Mine is having a issue, the screen will light up and i can hear the stuff on the screen but the picture itself isn't coming in, i dont know whats causing it

    • @writer6006
      @writer6006 Před 7 měsíci

      reseat your flex cables, the backlight working usually means that one of the flex cables isnt connected well

    • @deivonferreira
      @deivonferreira Před 6 měsíci

      Mine is having the same problem, is it possible happen because of the touch-screen flat? I tested only the lcd, the screen turn on but no image

    • @maxmax-xx7nw
      @maxmax-xx7nw Před 5 měsíci

      ​@@deivonferreiracheck BD8316GWL chip

  • @not.tiah29
    @not.tiah29 Před rokem +2

    How much would you say this costs to be fixed?

  • @Louketsu
    @Louketsu Před 6 měsíci

    It will be the same solution in case of a Nintendo swicht V1 standart one

  • @lydialovekraft2823
    @lydialovekraft2823 Před rokem +1

    that little white plastic piece on the right where the display ribbon connects fell off..... can I put it back? what do I do?

    • @tvpartsworld806
      @tvpartsworld806  Před rokem

      The whole connector has to be replaced. That flap is very important and it gives a pressure on the pins inside of the connector and thank of that it creates connection.

  • @obiblast
    @obiblast Před rokem

    my friend give me the title of the music at the 19 min magnificent

  • @ImLucasAbrantes
    @ImLucasAbrantes Před 5 měsíci

    I have the same problem, but happen sometimes. So, i just reset and it goes back normal.

  • @vaultgrayson8668
    @vaultgrayson8668 Před rokem

    Hi can yoy fixed my switch?i also having the same issues 😢

  • @robertgreen6069
    @robertgreen6069 Před rokem

    What if I don't have those tools

  • @ashanin1232
    @ashanin1232 Před rokem +3

    Can anyone help me with OLED version? Same symptoms. No picture, but working touch screen, sound etc. Also when connected to external display using type c cable everything works. Inspected display connector and whole board. no signs of damaged ics.

    • @joelreyes2240
      @joelreyes2240 Před rokem

      Did you find out how to fix it I have the same problem ??

    • @Comuc
      @Comuc Před 3 měsíci

      Do you have a fix ?

  • @giselrivera1079
    @giselrivera1079 Před rokem

    Me to

  • @RiverFlower26
    @RiverFlower26 Před rokem

    Hello, I want to ask so I dont play my switch for 6 month then today when I want to play it, the screen show black red and white line, then turn off after that there's sound but blank screen, so its my lcd or the cable?

    • @tvpartsworld806
      @tvpartsworld806  Před rokem

      If it's the Switch Lite you need to check the ribbon tape which goes from the motherboard to the second board. On the second board there are buttons and few connectors. One of them is the backlight connector so you should check it first.

  • @hove131
    @hove131 Před rokem

    Hey I'm back again. So I did my third switch lite back light repair. I do have a display now but I'm only getting it to go up to roughly 35% brightness (15v on circuit.) I also have no input when pushing left on d pad. I saw you have to replace a connector again because the one you used had a missing pin which caused your d pad to do the damet. I'm using brand new connectors. I've swapped daughter boards, ribbon cables etc. Any ideas on what you think may be the issue? Also replaced the back light controller ic just to cancel that from the equation on the brightness issue. Thanks!

    • @tvpartsworld806
      @tvpartsworld806  Před rokem +3

      Hi. I would try this motherboard with different screen first. 15volts is a bit too low. It should be 18v-21v when the backlight is on

    • @hove131
      @hove131 Před rokem +1

      @@tvpartsworld806 lol yea I hooked up a spare screen I had and laid it on the back of the board. Same result. Never seen this issue before once getting the back light going. May just have to take some shots in the dark now with certain things. My buddy there lives over in the UK and does repairs told me to try a M92 next. Never seen the M92 correspond with the backlight circuit ever but wouldn't hurt to try. Said he actually fixed a lite once by changing it.

    • @tvpartsworld806
      @tvpartsworld806  Před rokem +1

      @@hove131 ok so next step is to replace the coil and 3 diodes in the backlight circuit . Use ones from donor boards.

    • @hove131
      @hove131 Před rokem

      @@tvpartsworld806 I measured the coil and it was okay at around 4v but I'll go ahead and replace them anyways. Appreciate your help. Watch your videos at work all night even though I've already watched them all lol. Your channel is very underated. Keep on pumping out the videos to keep me entertained here 😂 where at in the UK are you from if you don't mind me asking? Going to ask my buddy that lives over there. Thanks again!

    • @hove131
      @hove131 Před rokem

      @@tvpartsworld806 diodes replaced and no change. I'll try the coil tomorrow morning after work and let you know. Thanks again.

  • @aaronbishop2691
    @aaronbishop2691 Před rokem +2

    Do you have a business repairing? If so can people mail you repairs? I have a switch lite with the same problem you can head sounds but no display. Just had the charger port replaced and now this. Screen did work before the port was replaced.

    • @tvpartsworld806
      @tvpartsworld806  Před rokem +1

      Yes, we have. We're based at 25 Springfield Rd WV100LQ. Please contact us through Whatsapp 07451466640

    • @aaronbishop2691
      @aaronbishop2691 Před rokem

      @Tvpartsworld didn't realize you lived on the other side of the world lol dang it!

    • @jacqueshowell6874
      @jacqueshowell6874 Před rokem

      ​@@tvpartsworld806 ...I've taken my switch to two different places locally with the exact same problem...I wouldn't mind mailing it to you if possible

  • @emochinito06
    @emochinito06 Před 6 měsíci

    My switch lite is does not show any display but the back light is on,what could be the cause of it?

    • @maxmax-xx7nw
      @maxmax-xx7nw Před 5 měsíci

      Found solution ?:P

    • @emochinito06
      @emochinito06 Před 16 dny

      i saw the reason why my lite has no display coz the display ic is broken... so display ic replacement needed

  • @LelandHasGames
    @LelandHasGames Před rokem

    Too many ads

  • @Talon-ku6xo
    @Talon-ku6xo Před 11 měsíci

    Then just buy n CZcams premium

    • @Talon-ku6xo
      @Talon-ku6xo Před 11 měsíci

      I was going to play fortnite with and then it turned off then I couldn't play for a month then it's doing work and then I think my friends think I quitted fortnite because I haven't been on

  • @EternalFiresky
    @EternalFiresky Před 4 měsíci

    I fucking hate this device.

  • @hero4life313
    @hero4life313 Před rokem

    Stop gate keeping and fix it