A New Chinese 125mm Dia 5C Collet Chuck For My Myford ML7
Vložit
- čas přidán 29. 08. 2024
- See this excellent new 5C collet chuck I got from Banggood. I got this versatile chuck to go on my Myford ML7 lathe:-
See Links Below:-
5 Inch 5C Collet Chuck Plain Back Lathe Clip Machine With 3 Screws Torsion Head Tools -- bit.ly/2Wo25sq
Round Type 5C Spring Clamp Pliers 1/8 1/4 1/2 Inch Spring Collet -- bit.ly/34F9E18
Machifit 5C Adjustable Thread Collet Stop Rod Holder -- bit.ly/380WXjt
Machifit 5C ER40 Collet Chuck Holder ER40 Collet Chuck -- bit.ly/37YxV4nB... Black Friday 2019 -- bit.ly/2OimVWy
I would have a 5C collet system over the ER type any day, they are a pita. My reservations with a 5C on the Myford is the weight and hang out beyond the lathe nose.
Same chuck I just bought, good quality. They don’t give you the bolt circle, but you can figure it out with a rotary table making a new back plate
When you change collets there is a WHOLE lot of chuck key work... PITA. I made a key for a cordless drill to make it quick and easy.
Gday Steve, very nice chuck and with 1/2 thou run out that’s awesome, great video as always mate thank you. Matty
Very nice handy bit of kit
Отлично у вас получается, смотрю с восхищением!
Very nice. I've considered getting an ER32 collet chuck for my Chinese Mini Lathe (King Canada 7x12), as I already have ER32 collets for my wood lathe collet chuck.
Nice Steve new tool for shop awesome.
I think you can get a cover for the collet holder which gives you a place to rest your hand when doing hand deburring on the lathe.
Having said that, I've never seen one on a myford lathe.
See Links Below:-
5 Inch 5C Collet Chuck Plain Back Lathe Clip Machine With 3 Screws Torsion Head Tools -- bit.ly/2Wo25sq
Banggood Black Friday 2019 -- bit.ly/2OimVWy
Banggood Health Protection -- bit.ly/33tNTBx
Banggood Health&Care Protection -- bit.ly/3d7QpSy
Round Type 5C Spring Clamp Pliers 1/8 1/4 1/2 Inch Spring Collet -- bit.ly/34F9E18
Machifit 5C Adjustable Thread Collet Stop Rod Holder -- bit.ly/380WXjt
Machifit 5C ER40 Collet Chuck Holder ER40 Collet Chuck -- bit.ly/37YxV4n
Banggood Health Protection -- bit.ly/33tNTBx
Banggood Health&Care Protection -- bit.ly/3d7QpSy
Halo saya mau beli bisa tidak..??
Awesome!
i was waiting to see how you got the backing plate off the lathe after you machined it ??
Hello Steve , thanks for the video ! 👍👍
Amazing that one can still use ER collets with an adapter !
Just in case you have such adapter, could you show it in a future video ?
Cheers,
Eddy.
I have been looking at the same chuck and wondering if they were any good.
Steve what happened to your electric drill for screwing and unscrewing the Chuck's??
That backplate sounds like cast iron, you should be careful when machining that stuff to cover the ways as the dust makes excellent grinding paste. Why go to 5c collets, I thought you already had a set of er32's courtesy of your mates at .....
Looks of interest, did you put a gauge on it to check runout ?
Hi John yes it was under half a thou.
Hi there steve,
Would this fit on a 115mm backplate?
Can’t seem to get a 125mm one for less than £900.
Hi no you will need the 125mm one. The sellers on eBay put those prices on when they run out of stock. So they don't have to take the listing down. If you save to your watching page you should see when they come in when the price goes back down to normal. Regards Steve
Steve Jordan wOW thanks for such a rapid response, I figured it would be too tight. But you have to ask. I wondered about the massive prices on eBay so have a few feelers out there. Just purchased myford capstan and cut off slide to do some commercial work so have started designing tool holder etc... finally the inspiration gained by watching your fearless construction of the most sublime accessories to your lathe is paying off. Steve
Will this fit the mini lathe?
A lot cheaper on Ebay
Is that a fact???.....well maybe there's hope for the deprived yet.
The lat word of every sentence is so drawn ouuuut. Kept me cracking up the whole video.
$204.86 is not a great price!!