5 things I HATE about the Traxxas Stampede 2wd
Vložit
- čas přidán 31. 01. 2023
- In this video I go over the Five things I Hate Most about the Traxxas Stampede 2wd xl5 model
RC Knockout Patreon Page - patreon.com/RC_Knockout?...
Traxxas Stampede 2wd Hardened Steel Driveshafts -
www.ebay.com/itm/283426826629...
1/10 2wd Traxxas Hub Bearing Kit - 10 pcs for Slash 2wd, Rustler 2wd, Stampede 2wd -
www.ebay.com/itm/153952629409...
Amazon Affiliate Links -
Traxxas Wheelie Bar (3678) for Traxxas Stampede 2wd, Slash 2wd, Rustler 2wd and Bandit 2wd -
amzn.to/3U9hER2
Traxxas Battery Expansion Kit (3725X) for Stampede 2wd, Rustler 2wd and Bandit 2wd -
amzn.to/3GTwE2l
RPM Rear Hub Carriers for Traxxas Slash 2wd, Stampede 2wd, Rustler 2wd, Bandit 2wd (Black) -
amzn.to/3Ev8pVq
Traxxas Blue Anodized Front Steering Blocks (3636A) for Stampede 2wd, Slash 2wd, Rustler 2wd and Bandit 2wd -
amzn.to/3Ex8DLL
Onyx 1/10 Scale 4 Pole Brushless Motor (4000kv) with 70 amp Esc with Ec3 Connector -
amzn.to/3gbponc
Hot Racing Medium Duty Servo Saver (Blue) -
amzn.to/3T4K2ny
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
amzn.to/3AfJzYG
Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
amzn.to/3dkYgkd
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) -
amzn.to/3bT6nnN
Amain Hobbies Links -
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (PINK) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Charger Not Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (ORANGE) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd Xl5 (ORANGE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (GREEN) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (PURPLE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (BLUE) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-...
Traxxas Stampede 2wd XL5 (RED) (Battery and Trickle Charger Included) + Bumper with Working LED Lights -
www.amainhobbies.com/traxxas-... - Auta a dopravní prostředky
Another great video. Most of these issues is shared with my Rustler 2WD as well. I agree with all you said. I decided to start swapping out the screws, but I haven't come around to swap them all out yet. It's quite the task.
Thanks! Yeah it’s probably easiest to just buy a stainless steel screw kit but it is still a lot of work to swap them all over
The main reason these cheaper models come with Philips screws is because this is marketed towards a beginner which most likely doesn’t own a dedicated RC toolset. But who doesn’t own a screwdriver? Also it has bushing’s because they require less maintenance and are more forgiving with sand and mud. Its actually quite genius for the market they’re trying to hit when you think about it. Now…. the vxl comes with hex hardware and bearings because it’s marketed for someone with more experience. Its literally on the box.
@@victorbarajas4705 those are all valid points…it’s definitely more tailored towards beginners….also it’s true that nearly everyone has a Phillips Screwdriver
My son just broke his body on the bigfoot edition (edit his truck fits a Traxxas 5000mh 3cell I also think the bigfoot one looks more realistic and seems lower)
That’s a bummer….I’m not super familiar with that model but I know it’s basically just a Stampede….I’m sure the body mounts are different
I have a Stampede with a Rustler 2wd chassis. It basically is a Rustler now. Doesnt handle as well as one with the monster truck wheels and taller body. But its much more enjoyable to drive. The steering is also better since its now a bell crank setup.
Good to know! Glad you’re enjoying your setup!
For the number one thing you hate you can easily get the stainless screw kit for the stampede vxl and the hinge pins for the vxl hope this helps
That’s all very true….but it takes time and more money to swap it over….I just wish they would have charged a bit more money in the first place and had hex screws installed from factory…I do understand why they did it though
The VXL Stampede comes with better screws, actually all VXL Traxxas models do. I don't know about the new model but the VXL only fits 2 cell lipo. I bought my VXL Stampede used. The chassis was snapped by the servo, but the servo saver was still good. My 7 year old slash still has the original servo saver, it's my most abused Traxxas model everyone runs it. Most of the time I run 3s lipos. Had to replace the tires many times, burn the tires off it.
That’s surprising the stock servo saver has lasted that long….without a doubt the VXL lineup is much better equipped compared to the XL-5 models
I did the slash conversion which is just the chassis and new body. Kept the ground clearance and had lower body. A little bit harder to wheelie until i put my old 1/8 scale redcat terremoto motor in. It pulls wheelies at any speed on command
That’s Awesome!
cool rc and great information
Thanks man!
@@RCKnockout 🙂👍
I moved the esc towards the servo as well as a waterproof reicever and use straps instead of the plastic strap
The other thing I did was a bug body so you can’t see the inside
Nice! How has that been working out for you?
@@RCKnockout a lot better keeps the center of gravity down lower if you want a picture I can find a way to send one
@@sterling-hugueley that’s pretty cool man! I’ve actually seen that setup before
Yes I got a rustler 2wd xl5 which I brushless converted. I went through 3 stock servo savers and then upgraded to a metal servo horn which is 10 times better. I also got a hex screw kit and converted the whole car over to hex hardware. I stripped out alot of Phillips head screws. I also upgraded to bearings too. Traxxas makes the bandit rustler and stampede platforms very cheap. The vxl versions and the 4wd vxl versions are alot better imo since they have bearings and hex hardware. Another thing that the vxl has and the xl5 doesn't is steel adjustable camber links while the xl5 has the plastic non adjustable links.
I agree with you 100%….I thought about putting the plastic links in my list…they are weak but for the cost of the machine it makes sense they used them….overall the vxl models are much better compared to the Xl-5 models…the brushed Slash is much better equipped compared to the Stampede XL-5 though…it is about $30 more…but well worth the extra cost to get the steel adjustable links, hex screws and bearings all around
A super cheap way to change out all the screws would be to order from belmetric. You can order any amount and they have tones of sizes. Traxxas does use some odd size screws (length), but I'm sure a couple mm less or more wont hurt.
Thanks for the recommendation!
Soooo... the things you hate about the base model Stampede is that it doesn't have a lot of upgrades?
I run the traxxas anacondas on my slash and rustler. I ordered some duratrax six packs for the slash and for my rustler I am planning to get proline speed treads or trenchers. I do have to agree that the stampede and bandit xl5 completely stock looks like a toy grade but once upgraded it looks more hobby grade. I only run on 2s in my cars but looking on 3s lipos so I'll look into that expansion kit. The ruslter has the exact same battery strap or tray problem as the stampede.
Nice man! It’s probably safest on most parts to run 2s rather than 3s anyhow
You won't regret the 6 packs they are amazing!
Nolan... You have a face.. Good to see you man...
That’s true I do have a face lol 😂
Honestly i think it looks better with a raised body and aluminum wheels which is everything my new stampede doesn't have
For $200 with a remote, battery and charger there really aren’t any complaints about this rig. Spend $600 and get a better one.
I disagree….there are always improvements that can be made….even on an entry level rc
You spend $600, they’re still gonna be issues with those rcs….
@@RCKnockout modification is the entire point of getting into hobby grade RC’s.
@@oneofthosepeople2101 I agree with that…but that doesn’t mean that OEM trucks can’t be made better…the brushed Stampede is pretty weak overall from my experience….but if you Bash anything hard enough you’ll still need to upgrade it…
Part number or link to hot racing servo saver?
I put it in the description of the video 👍😉
The stampede needs a bumper I haven’t had a bumper and the screw in the back is half way gone I hope it does affect anything
Agreed…I doubt they’ll add one though….maybe if they raise the prize alongside
Buy an RPM bumper. It helps
@@busman2050 I was saying they should add a bumper stock to the stampede
Let’s get an 1/16 e revo review
Had the same problem with my bandit all Phillips serws
Yeah they’re a major pain to get in and out…I constantly feel like I’m about to strip them out
Yeah I ordered a stainless steel set of serws didn't really won't tear the bandit all the way down sure did make wrenching a little easier
@@chrismorgan9290 yeah it’s something I might do for mine too…it will make it so much easier going forward
Kinda feel like this is a intro rc to get people into it. Very simple design with Phillips screws. I hate Phillips screws to, but understand why they use them. I do however wish they would use all machine screws so that you could upgrade to hex if you want. The stampede vxl has hex screws and adjustable links. It’s closer to what you want in an rc car, but too powerful for beginners.
Yeah it’s definitely tailored more toward beginners and you can definitely see where they decided to save money….it’s still a good truck overall though
while you can still take out stripped philips head screws, you can not take out a stripped hex. hex screws are harder to strip, but if they do theres almost no way to take them out
@@jackieglade didn’t know that…yeah hex screws are a pain in the butt to get out once they get stripped out
@@RCKnockout lol
Not all the newbies just entering the hobby have hex bits to take out the screws
Yeah I understand that’s exactly why they did it…but they are a major pain to work on
Nice video I cut a hole in my body so I could lower it down probably not a good thing for durability though
Thanks! Where’d you cut the hole at?
The bed of the body
@@Lorenz_c so how is it connected in the back now?
I just cut the part where the esc and receiver is not where the body mounts
Might need cut some more with the battery expansion but I don’t have it so I’m not sure
I have the vintage and its better than the new though I did upgrade to a vvl
Didn’t know that….vintage replacement parts are probably hard to come by
Another issue (mostly one of the issues for me)
The body, i wish it had a lock instead of clips, not too big of an issue but it gets annoying to lose clips and having to buy new ones
That’s true…I’ve lost quite a few too….but most rc cars on the market do have body pins…
@@RCKnockout true, but still pretty annoying to lose clips often, probably a common issue with a lot of the rcs that use clips instead of a lock
@@isti0phoridaegd381 yeah majority of rc cars on the market use some sort of body clips….only a few don’t
@@RCKnockout found a way around the clips, proline body mounts secure lock, youve put them on your slash before, itll work with the stampede, you should do it next in your stampede series
@@isti0phoridaegd381 I’ll have to look into it thanks!
Oh and I run hpi mud thrasher tires
Why did you need open transmission
My stampede vxl couldn’t fit a traxxas 2s, my opinion after owning it for a while is that your much better off with an Arrma granite
Looks like your right front shock tower thing is broke. Part 3639
Didn’t even notice that crack…Thanks for letting me know….fortunately I’ve got an Aluminum one to put on 👍😉
The Stampede is too much of a wheelie machine for me. Also the chassis, being as narrow as it is, and the limitations of the battery, is another reason why I haven't purchased a new one. The Philip screws is annoying as you would thing they would standardize all the models to make it easier on the production lines.
Yeah I can understand that…it’ll never be the best handling rig, no matter what you do to it but it’s still fun to rip around….yeah the hex screws would be nice to see in the future
Pays $150 gets upset it’s cheap 😂
I don't understand the 2nd gripe. "It don't look realistic, it looks like a toy".... sir not everything has to look realistic its supposed to be fun to play with cause you know it's a toy.
@@billy-waynejeffcoat4828 a lot of people complain about the stampede not looking realistic but literally all the bright Hoss, Maxx and X maxx look perfectly real to them i don’t get it at all☠️☠️☠️☠️ it just looks like a lifted truck to me or a old school 80s/90s monster trucks
#1. It's not an Arrma Granite.
I have both...
I got a Stampede in 1993. Shelved from 1999 to 2022. When I picked up the hobby again, I was shocked to find the Stampede is 98% identical to the current offering. Nice to get parts, lousy for innovation. It handled like a pig then, it handles like a pig now. I converted to brushless for the nostalgia, spent way too much on RPM plastic, and the bone stock Granite handles and drives 1000x better. Yes, I know I'm comparing 2wd to 4wd.
Yeah the Stampede hasn’t changed much…it is definitely easy to get ahold of parts for it
I guess you don't know what your doing I run a 5200 3 cell no expansion kit and put electric up front and troped the body mounts all the way down and run brushless in it
Some 3s packs will fit but a lot won’t without running the expansion kit…you can run the body low if you place the electronics up front like you did but most people would prefer keeping it in the stock location
The Stampede is a decent truck for a beginner to rip around the backyard etc but it's not a great basher imo.
Completely agree with that!
Don't know why you are complaining about not having wheelie bar stock, stampede is monster truck style and most wheelie bars will break if bashing anyway, just learn how to use throttle. I've got 10yrs+ old vxl rustler and still have original steering servo and arms as haven't fail. Better quality 3s battery's are thinner but still can fit in stock battery box. We bashing ours so hard at mx tracks and skatepark ramps launching so high. If you wanted better you should have bought vxl model of rustler or lower stance rc as it is they're all toy, vxl 2wd rustler has allen key bolts. That's what you get if you by cheaper.
So complaining it can’t fit a battery that it’s not meant to take. Gotcha
I hate the rims and tires the most
Yeah they don’t look good
“My opinion” wheelie bars look stupid and you don’t need them, you can wheelie great with the stock setup if you understand throttle control and the electric power band on your model, instead of just dragging some tiny wheels at a set position, I suggest everyone learn throttle control, and how to keep the car in a wheelie without a Vice to help, gets in the way when bashing as well 🤷🏽♂️ just my opinion
Also man I’m wondering why you still run the antenna through the body? If you tuck it in between the rear body posts, it doesn’t come out, doesn’t show, and still has the same amount of range ;) literally the first thing I did to my Stampede
I think wheelie bars can be both helpful and in the way..depends on the scenario
@@itzzgraham idk….I don’t really like bending the antenna tube…
@@RCKnockout Trim the antenna tube and tuck extra antenna wire in reciver box.
@@james654100 you can’t do that I’ve tried….you’ll lose all your range
WHO CARES HOW IT LOOKS?
Most people spending their own money on an rc car care about how it looks
NOT 1 I KNOW, ODD@@RCKnockout
Buy a 4 wheel drive no more problems no more jacker die jack come on crown up 😢about spending some money, dinero,s , euro,s😂
Huh!?
Talking about realism, the ridiculous wide wheel stans didn't bother you?
Not really….the body mounting is what bothered me most
God Traxxas makes the ugliest RCs ever 😂
The Stampede is the worst car I. The traxxas lineup. It's suited for a 7yr old. Nuff said. If you want a real truck get the hoss or maxx
With a few mods it’s still a fun truck