From ebay - cheap 5MP 30X Zoom, Mini-Speed Dome PTZ Camera Review
Vložit
- čas přidán 17. 06. 2018
- From ebay - PTZ Mini Speed Doom Camera IP 5MP 2592x1944 Pan/Tilt 30x Zoom Speed Dome Camera.
It's a lie - in reality it's only 10X zoom, although they later claimed that it's 18X.
10x zoom does not mean 10 times magnification !
The magnification of a lens is determined by the focal length in relation to the image diagonal.
Your office looks wonderful. :)
Hello, I have the same camera, did you manage to configure the ftp? Do you have a port sd because some identical have one and no other? Did you find the cruise mode configuration? thank you
Reviewers usally at least post the model number or URL link to the web store. What good is this to me if I don't even know the model or where to buy it?
These cameras might all have a backdoor accounts and to prove it try to log in using the below credentials
username "HANKVISION_2016"
password "HANKVISION_2016"
or
username "HANKVISION"
password "HANKVISION"
It's good practice to port scan your IP camera just to check what services might be running, this goes for any new network attached device for that matter) its not so hard just use google and you will learn a new skill which is super useful and pretty interesting . I use the software Nmap which is free > google is your friend.
This is a really bad case of bad software and firmware design and a few blatant lies.
Seriously ,do not let these connect to ANY external internet ever.
this firmware can break your entire network security completely if a competent attacker really wanted to he can get into whatever is on your LAN. I wont go into details but the lowdown is that the embedded linux is running everything as root with telnet exposed and backdoor account to boot.
If anybody is interested I can talk more. this is a common problem with a ton of cheap security cameras.
its sad because a lot of these camera have pretty nice hardware which is like 90 percent of the "make a IP camera" job. It's the firmware / software that is complete and total trash.
Basically any camera that has this interface or similar is the same
In fact pretty much any camera using "cloud" or "UID" or "P2P" which is almost every cloud cam, android app cam, cheap home camera and quite a few expensive ones as well (think easy setup and internet accessible using some app) they are also really really dangerous but just in a different way. I have personally "checked" to see if these cameras are out in the wild .............
Most defiantly they are and in abundance. ill just leave it at that.
If somebody wanted to be a rubbish human and really mess with you and your life, they most certainly could. I'm a nice guy, I don't want to be a shithead so i didn't mess with people i just check after I looked into this for my own sake for my own cams .honestly I know just barely enough about technical stuff to do proper digging / research and wow, did i ever discover a big pile of stinky shit right in my own home!!!!! that shit is might be in your home to!
At this point you might be like me in thinking "so what ,it's not in the bedroom! and even if it was I'm so good looking and dashing I don't even care!" but you should remember its not just the camera itself that is exposed, its potentially every device on your on your network ......Phones >Computers > "smart" devices >Servers of all sorts and with all things..... you name it.
I've seen it with my own eyes and im just spreading the good word. Peace
Hi, thanks for this video. My dealer can´t say, if the camera will be able to send a picture via FTP every minute? For webcam use?
I got one of these about two weeks ago and have been doing pretty extensive testing. I run Blue Iris with 12-15 cameras (some come and go during testing) and have about two years experience with BI. Of course, I know nothing about how this camera will hold up with time. Here are my thoughts so far...
- for the price, pretty amazing. I run several Panasonic PTZ cameras 5-10 years old. They were commercial-grade cameras costing $800-1000 when new, but I bought them used on eBay for $300-500 with no outdoor dome. I made my own domes (a lot of work) to use them outdoors. This eBay camera is plug-and-play for outdoor use.
- It is not very good for close-up (under 30ft) use. It excels at long-distance viewing of small areas - as in observing birds or wildlife at a distance. The minimum focal length is not wide-angle as on the Panasonic cameras. I'm using it to monitor a corner of my property about 100 ft. from the house that is not covered by my other cameras. It works well for that.
- As others have commented, at night, the IR illumination lights up closer (20 ft-30 ft) objects strongly so that anything in the more distant background is in invisible blackness. I haven't found any way to control the brightness manually.
- So far, even with frame rate set to 6, the camera seems to create a much heavier CPU load on my Blue Iris server than my other cameras. I hope to find a way to reduce the CPU load.
Conclusion: within those limitations, if it will meet your needs, the camera is a great value for the price. I have 30 days to return it, but I'm leaning towards keeping it as it fills a need in my system.
Really thoughtful write up! Just curious, did you keep this? If so do you have any additional tips after 6 months of usage? Maybe you could do a review on your channel? I have about 1 acre of land that is surrounded by 'nature space' so we get lots of wildlife and most of the security cams aren't really suited to capturing deers and fox and bear - the wildlife tends to stay on the back property line so having a nice zoom perked up my ears... for the price maybe I'll just pull the trigger - $74 bucks US for a 5MP PTZ is really hard to turn down... but if you have any 'bad news' I'd love to hear it before I pull the trigger ;)
These cameras might all have a backdoor accounts and to prove it try to log in using the below credentials
username "HANKVISION_2016"
password "HANKVISION_2016"
or
username "HANKVISION"
password "HANKVISION"
It's good practice to port scan your IP camera just to check what services might be running, this goes for any new network attached device for that matter) its not so hard just use google and you will learn a new skill which is super useful and pretty interesting . I use the software Nmap which is free > google is your friend.
This is a really bad case of bad software and firmware design and a few blatant lies.
Seriously ,do not let these connect to ANY external internet ever.
this firmware can break your entire network security completely if a competent attacker really wanted to he can get into whatever is on your LAN. I wont go into details but the lowdown is that the embedded linux is running everything as root with telnet exposed and backdoor account to boot.
If anybody is interested I can talk more. this is a common problem with a ton of cheap security cameras.
its sad because a lot of these camera have pretty nice hardware which is like 90 percent of the "make a IP camera" job. It's the firmware / software that is complete and total trash.
Basically any camera that has this interface or similar is the same
In fact pretty much any camera using "cloud" or "UID" or "P2P" which is almost every cloud cam, android app cam, cheap home camera and quite a few expensive ones as well (think easy setup and internet accessible using some app) they are also really really dangerous but just in a different way. I have personally "checked" to see if these cameras are out in the wild .............
Most defiantly they are and in abundance. ill just leave it at that.
If somebody wanted to be a rubbish human and really mess with you and your life, they most certainly could. I'm a nice guy, I don't want to be a shithead so i didn't mess with people i just check after I looked into this for my own sake for my own cams .honestly I know just barely enough about technical stuff to do proper digging / research and wow, did i ever discover a big pile of stinky shit right in my own home!!!!! that shit is might be in your home to!
At this point you might be like me in thinking "so what ,it's not in the bedroom! and even if it was I'm so good looking and dashing I don't even care!" but you should remember its not just the camera itself that is exposed, its potentially every device on your on your network ......Phones >Computers > "smart" devices >Servers of all sorts and with all things..... you name it.
I've seen it with my own eyes and im just spreading the good word. Peace
Does it have audio? my body looks the same, but I cannot get sound to work.
I have this same SecuPlug camera but the 5.0 MP poe model, What NVR works with this unit? I tried the Amcrest NV2108E-HS 8-Channel POE NVR but no go after trying 2 units, I believe the nvr was defective as it would not accept the start up passwords of "Admin". I did test the cam on the monitor and it works fine, Any info would be appreciated on what NVR will work with this. Thanks
Mine has also tilted image. Do you know if its possible to fix?
Ever come across firmware updates for it or maybe not much out there? Thanks!
Hi there, great video. Loved the tear down. I have the camera, where can I buy the ptz body/housing for it, any idea? Any AliExpress link?
Mine stopped working today - also I cannot connect to the web interface. The IP address is pingable, but when try to login, it times out. None of the tools work to hard reset it and I don't seem to find a reset button inside, or outside the camera - any ideea hpw to factory reset, maybe I can fix it this way - Thanks
Can confirm that this thing is seen on network with Invid Elevate 4x4 NVR. Not through the direct ports for cameras though. NVR PTZ functions work as well, so it's nice to have mobile PTZ controls through a single Elevate app on my 6S, even across state lines.
Will this be possible to run this of a usb cable.5v 2amp
What NVR you use?
is there picture lag slight jitter?
Hi, thanks for your video. I got the same camera Iposter from eBay. I used it once and now I can't find IP when i connected to home network. Do you know to how to factory reset the camera? Thanks
On what device can control PTZ finctions?
Hi, Steve! Just got done re-doing my home security camera system. Was a real chore running all the cables! Have 18 cameras outside. All are running off of a 24-port POE+ switch. I use Blue Iris 5.0. My wife says it's embarrassing that I have so many, but I say more is better!
WOW, 18 for your house? Is it a mansion? I have 6 which seems like a lot but plan to add 2 more. to max out my 8 camera NVR for my 5MP PoE camera's. I do have 1 dome PTZ camera on the front corner of my house. Normally looking down the side of my house. But I can turn it all the way around to look down the front of my house and the front door and porch. It only has 3 times optical zoom on it. I'm sure 30 would be nice to have.
I'm watching the end of the video and the camera is mounted up so high all you see is the roof of everyone's home. It doesn't seem very useful to me where it's mounted.
@@MrJBDragon i have 9 and trying to get 3 more
Does this camera come with a reset button?
Thank You for the detailed video. I have the same model.. have you found a place to connect audio-mic or an SD-Card connector on the board?
SD in behind the cover that is screwed on. but more important
These cameras might all have a backdoor accounts and to prove it try to log in using the below credentials
username "HANKVISION_2016"
password "HANKVISION_2016"
or
username "HANKVISION"
password "HANKVISION"
It's good practice to port scan your IP camera just to check what services might be running, this goes for any new network attached device for that matter) its not so hard just use google and you will learn a new skill which is super useful and pretty interesting . I use the software Nmap which is free > google is your friend.
This is a really bad case of bad software and firmware design and a few blatant lies.
Seriously ,do not let these connect to ANY external internet ever.
this firmware can break your entire network security completely if a competent attacker really wanted to he can get into whatever is on your LAN. I wont go into details but the lowdown is that the embedded linux is running everything as root with telnet exposed and backdoor account to boot.
If anybody is interested I can talk more. this is a common problem with a ton of cheap security cameras.
its sad because a lot of these camera have pretty nice hardware which is like 90 percent of the "make a IP camera" job. It's the firmware / software that is complete and total trash.
Basically any camera that has this interface or similar is the same
In fact pretty much any camera using "cloud" or "UID" or "P2P" which is almost every cloud cam, android app cam, cheap home camera and quite a few expensive ones as well (think easy setup and internet accessible using some app) they are also really really dangerous but just in a different way. I have personally "checked" to see if these cameras are out in the wild .............
Most defiantly they are and in abundance. ill just leave it at that.
If somebody wanted to be a rubbish human and really mess with you and your life, they most certainly could. I'm a nice guy, I don't want to be a shithead so i didn't mess with people i just check after I looked into this for my own sake for my own cams .honestly I know just barely enough about technical stuff to do proper digging / research and wow, did i ever discover a big pile of stinky shit right in my own home!!!!! that shit is might be in your home to!
At this point you might be like me in thinking "so what ,it's not in the bedroom! and even if it was I'm so good looking and dashing I don't even care!" but you should remember its not just the camera itself that is exposed, its potentially every device on your on your network ......Phones >Computers > "smart" devices >Servers of all sorts and with all things..... you name it.
I've seen it with my own eyes and im just spreading the good word. Peace
I got the same camera only of different brand. Does the rotation motors of the camera make noise? Specially quick pan rotation the motors make pretty loud noise. Whats your experience?
How do you reset it to factory defaults?
hi how did you connect the camera to your router please
Can you put a SD card in this camera?
I just purchased this but it does not rotate up high enough and cuts off anything over eye level. Do you think moving the belt on the motor will change the vertical degree of tilt? I don't need to tilt down so much. I would try it but mine is already 30ft up in the air on a pole....
There should be a sensor with a plastic tab that triggers the sensor inside the camera. You can remove the tab and file the edge of the tab so it triggers later or file the mounting holes/ drill new holes so the tab triggers later.
@@lonnieh7777 Lonnie, have you tried this? I have a similar camera and have the same problem where my camera does not tilt up high enough. Mine is mounted pretty high up and is NOT east to remove so I don't want to monkey with it unless you're sure that I can get it to tilt up more without messing up the way the camera works.
I just bought one but can't get it set up. how did you get it connected?
They didn't ship any instructions and they dont event make Microsoft explorer.
Most of security camera made in china are come with fixed IP. So you need to configure the camera network information to join in your network.
ok there is backdoor on this camera, but how to fix it?
Do you have website to download upgraded firmwares to avoid this backdoor?
simply don't let it to connect a wifi that has internet connection.
the native rezolution of the sensor is about 4Mp
so for 5Mp - it is interpolated
its chinese 5 mp))
I am considering buying this camera for my CCTV system.
Do you know if it is Hikvision NVR compatible?
Also, that frame rate seemed low. What is it, like 10fps? It looked like its way less than 15fps.
10x eh? Well, that's deceptively disappointing. I see they sell a 20x version of this camera also. I wonder if its the same camera, just looking to scam a few more bucks.
Either that or that 20x is really 7x.
I just don't want to get burned like I did buying another cheap PTZ cam last year.
Great job on the review of this ptz camera ..and thank you for showing the power consumption. Very detailed information you gave us.
Can you connect it to wifi router??
Can sd support be added?
Hi, i see that the camera's web page has a record tab. does this camera can record directly to the pc hard drive?
Thanl you.
can not record directly to the pc hard drive,you should buy NVR and Save records in NVR HDD .thanks
@@JZHTOPThank you for the review and the answer
I have the exact camera
Is the their a way to reset the camera to the default settings.
I was having problems connecting my camera to my NVR. So I changed the cameras ip address via internet explorer to match the ip addres on my NVR. And now I cant connect to the camera. Every program im using can not find the ip address, or the camera.
Thank you
I'm in the same boat.. Did you figure it out?
Does it support other browsers such as Firefox or Mac browsers Safari ?
I use Firefox, which is also supported by this ip camera
nice review. thanks
Thanks for the detail.
yes,he is right, this is not 30x optical zoom camera, it is only 18x. i was a ebay seller before that sell security cameras and you can still watch a lot of ptz camera video of mine.
Is that a Sunba? If it is they are of infamous quality and likely won't last a year. They tend to overheat in the summer and cook the electronics that control the network comms. For the same price (assuming you got it around $350ish) you can get a Dahua SD49225T-HN-W that is orders of magnitude better in build quality and still has almost identical specs in terms of resolution, zoom, etc.
sunba camera quality is just so so,but their security camera applibation is good for users.
I own 5 sunba cameras 3X 601-D20X and 2X 405D20X , never had any issues with any of them , they run like a charm , one of them is a few feet away from my pond , and is exposed to water projection and humidity 365/24 . Of course they don't compair with professional cameras such as Axis , Panasonic etc but they do a pretty decent job for non professional users. Sunba uses Sony sensor ( as most of Dahua products ) . At night with all the laser beam activated they draw 25w out of the POE injector ( exactly as specfied ) I son't see how they could overheat ... ;-) that being said you really need to pay attention to the quality of the POE injector you get , just like smartphones don't buy a 2$ charger if you expect your device to last .
@@N1N1BOY yes, the poe injector, most of the them are not the original ones, it indicates that 48V 2A, for example, actually they are not and not stable
where to buy ?
I'm interested in purchasing one of these. Is it a Lionvis 5MP IP PTZ Camera? Does it support OnVif? Thanks in advance...
www.aliexpress.com/store/product/4-inch-Mini-4MP-IP-PTZ-camera-Network-Onvif-Speed-Dome-30X-Optical-Zoom-PTZ-IP/1908127_32832087058.html?spm=2114.12010615.8148356.4.aacc46ceSbT5xp
support onvif, and it is 2592x1944
How to factory reset?
How do you restore the camera to the factory defaults?
Looks like he doesn't answer questions. Depending on the camera there could be a physical reset button either on the end of a cable with a protective cap over it, or under a flap/door on the camera body. If there is no physical button you can try one of the free software programs. A few you can try are SADP, EasyVMS, and Easytool. You run the program and it (hopefully) will discover your camera, you can then change the camera's IP address and gateway to match your network. After that you log into the camera using the IP address you just assigned. A lot of these cameras, especially the older ones, will only let you login using Internet Explorer - no Firefox, Edge, etc.
Can you swap out the sensors in this camera?
SKY WATCHER UK yes you can but the original sensor is much better cause it’s nicely done to the camera
I purchased one of these. Was working fine till I updated the software. My pan tilt and zoom stopped functioning. My camera is still working. What do you recommend I do. I'm tempted to try find a way to factory reset this. But would that do justice?
you have to get a the camera back to original software version. you can contact the camera seller.
Hello i have the same problem, where i can find the firmware of this camera ?
@@xiaonasi3408 I lost my ptz function too. Did you manager to fix it ? Brgds Nicholas
@@Doryphore59 you have to contact the ptz camera seller, they will help you and send you the original firmware.
@@november4783 you have to contact the ptz camera seller, they will help you and send you the original firmware.
Whats the model of the camera? Is there some link for it? How much does it cost?
The model nr is JK-HD54FDM550AP. About ~160$ on Aliexpress or eBay. The model JK-PHD54FDM550AP (with an extra "P") supports PoE, but only with standard 803.at (up to 25watts, not 802.3af i.e. up to 15 watts). You can also use a PoE injector and splitter cable duo (~5$) which is quite handy.
There is also one with audio recording capability (built-in microphone) but I yet have to find that model nr.
@@nekron75 yes, the model set by our ebay team when i was an ebay seller. p means poe, wf means wifi, a means audio, c means support micro card, mx means 4-in-1 cvbs,ahd,cvi, tvi ptz camera..
I saw that zoom and thought I would do better with a handheld magnifying glass. So it isn't really a 30x zoom, thats crazy.
Hello, do you know how to reset this camera? I can not enter the configuration page.
Check your "router" settings first to see if this solves your problem. The camera arrives at your doorstep with a default IP address of 192.168.1.110. I bet you can't see the camera on your network because your "router" LAN IP address is probably set to 192.168.0.1. If you temporarily change your "router" LAN IP address to 192.168.1.1 you will be able to access the camera configuration and while you're in the camera settings change the camera factory IP address to 192.168.0.xxx (xxx means whatever number your other devices aren't using) and then you should be able to access the camera settings after you change your router LAN IP address back to your original 192.168.0.1. I just killed a couple of days figuring this one out so see if this solves your problem.
@@marv50208 Hmm interesting. iv already killed 2 days trying to get my camera to work. I will give this ago once a regained my patience with this device.
@@TheNo1prodigy hi, i have the same Problem with my camera. You need programm Device Manage. In this programm is so easy to find you camera and change settings.
In stettings
You know how to reset the software? I forgot the admin pw 🤦♂️
Hello, does anyone have the link to download their original firmware ? . I updated the software. My pan tilt and zoom stopped functioning. My camera is still working.
thank you in advance
I found a list of firmware, but how do I find the right one? www.enster.com/faq/Link-for-downloading-IPC-firmw.html
I had the same prblm with same type og cma from ZYsecurity Aliexpr. I ctc them and got a .Bin file for upgrade(update) in CMS PC-program. Now ptz works ok. I still have to find a way to get Smart PSS to acc motion recording to my Dahua NVR.
Is this camera capable of push notifications?
it depends on dvr
yes,it support both email and app push notification. for example, if you set email alarm, you will be noticed by the APP and email.
Would have been nice to get a link we’re we could purchase it
Ulysses Yates I personally suggest (eBay) cause it’s bit cheaper
@@lukereo4lif360 Ebay SUCKS when it come to customer complaint/return satisfaction... (Signed: Long-Time-User)
Hey Thanks for the video. I can't for the life of me find the RTSP address for h264? I know the mpeg4 which is rtsp://(login):(password)@IP Address:554/mpeg4main. It's been driving me nuts not being able to rtsp pull on the h264. Do you by chance know what the address format is? Thank you.
RTSP address format (for example, for VLC):
rtsp: //192.168.0.XXX: 554 / h264 / live.sdp
without spaces :-)
@@HenrichProksa Thank you so much for the reply! I just tried it and no dice. The format you sent doesn't require any ID or password in the url? This has been a complete frustration for me trying to find it.
@@clearlyclever9615 VLC will ask for the user account and password, for use in other cases (I have no experience) unfortunately I can not write the correct address entry format
@@clearlyclever9615
the password can only be entered if the camera is password protected. if the camera has a password, the VLC program will ask for the access code - user account + user password
Escam dome. Where's reset button
Hello ,
I have the same camera since the firmware update, the ptz does not work. Can you link to the original firmware. Thank you
sd card can be added? where can we get latest firmware?
Did you ever find out if it take a Sd card?
@@geemoeentertainment9523 there is no sd card slot inside.
You should be able to get the .Bin file from seller to upgrade in CMS
It is very good! 👍👍👍
Great review Thanks
anyone find a way to reset? my cam turn on, but its not connecting to the network. default IP 192.168.1.110 not working
The camera should have a tiny hole so when you press it will reset. You should use a tiny metal piece that came with the camera,
@@3DModelsToys where is the reset button?
I have this exact camera and I can’t seem to log into it
These cameras might all have a backdoor accounts and to prove it try to log in using the below credentials
username "HANKVISION_2016"
password "HANKVISION_2016"
or
username "HANKVISION"
password "HANKVISION"
It's good practice to port scan your IP camera just to check what services might be running, this goes for any new network attached device for that matter) its not so hard just use google and you will learn a new skill which is super useful and pretty interesting . I use the software Nmap which is free > google is your friend.
This is a really bad case of bad software and firmware design and a few blatant lies.
Seriously ,do not let these connect to ANY external internet ever.
this firmware can break your entire network security completely if a competent attacker really wanted to he can get into whatever is on your LAN. I wont go into details but the lowdown is that the embedded linux is running everything as root with telnet exposed and backdoor account to boot.
If anybody is interested I can talk more. this is a common problem with a ton of cheap security cameras.
its sad because a lot of these camera have pretty nice hardware which is like 90 percent of the "make a IP camera" job. It's the firmware / software that is complete and total trash.
Basically any camera that has this interface or similar is the same
In fact pretty much any camera using "cloud" or "UID" or "P2P" which is almost every cloud cam, android app cam, cheap home camera and quite a few expensive ones as well (think easy setup and internet accessible using some app) they are also really really dangerous but just in a different way. I have personally "checked" to see if these cameras are out in the wild .............
Most defiantly they are and in abundance. ill just leave it at that.
If somebody wanted to be a rubbish human and really mess with you and your life, they most certainly could. I'm a nice guy, I don't want to be a shithead so i didn't mess with people i just check after I looked into this for my own sake for my own cams .honestly I know just barely enough about technical stuff to do proper digging / research and wow, did i ever discover a big pile of stinky shit right in my own home!!!!! that shit is might be in your home to!
At this point you might be like me in thinking "so what ,it's not in the bedroom! and even if it was I'm so good looking and dashing I don't even care!" but you should remember its not just the camera itself that is exposed, its potentially every device on your on your network ......Phones >Computers > "smart" devices >Servers of all sorts and with all things..... you name it.
I've seen it with my own eyes and im just spreading the good word. Peace
hello 👀✌️👋 in your 💬 explanation regarding the zoom, you are most likely wrong ⚠️ on how the distance is calculated, compare this camera that you explain with this other 📌 model CS66Q-X18 whose zoom is 18x ✔️ there you will find some better answers compared to your 30x camera, the camera that I mentioned has been updated and corrected😁 details that have turned out very well and will still improve for the future.👌 and the rest of your explanation is excellent what you say, I hope it can be done make that comparison with the mentioned model CS66Q-X18.👋👋✌️✌️👀💬
Is this one have night vision
yes
yes,about 80m ir night vision. and it is black white color, i know that there are some cheap colourful night vision ptz cameras now.
Do you know how to reset it?
you reset camera?
@@TheDiceman1769 no
@@TheDiceman1769 How reset this cam JK-PHD54FDM550AP
WARNING, The camera itself is awesome. However, if you have an issue there is very little info or support if any. If,. As in my case, the camera was broken when you receive it, your out of luck.
I have gotten excellent support via eBay messaging. I bought mine from eBay seller surveillancemall. They have a 30 day return policy. They ship from the US (KY) and, should you decide to return the camera, you can return it to a US address.
TheCyberRebel hi I bought 3 ip camera 2 at eBay and one at amazon and I bought protection plan if something is wrong I got the money back
I bought a nvr an eBay didn’t work right for 249$ and a protection plan 35$ and in 2 weeks I got a 249$ for the SquareTrade so I lost 35$
yes, when we buy cameras from online channel, the other very important factor is the customer service, is it professional? is it timely?
though i am not an ebay seller anymore, anyone of you have the ptz camera problem feel free to ask.😃
@@frankhoose yes,i was the operator of surveillancemall when i was in the company.😝
however for $150 it is cool camera
This camera price
I paid $220 CAD in 2019, good quality built unit for the $$$
Hello link? Price?
Rude?
I'm thinking about setting one of these up inside my car. By putting on the back window ledge
I have this, the zoom is amazing, it totally is 30x
이 카메라의 가장 중요한 단점은 야간에 빛이 없다면 풀컬러 작동이 되지 않는다. ir 자동 인식만 존재함. 야간에도 풀컬러로 고정하고 싶다면 너는 카메라 앞 부근에 전등을 켜 놓아야 한다.
👍👍👍👍👍👍👍
30 X zoom..... X means, times. So 30 times magnification. X marks for presentation.
DENALE APP charge for CLOUD SERVICE
Omg you said PTZ and not PTZed
👍👍👍
any issues with fogging? if so any solution?
Anti fog spray for glasses
wipe off the water on the transparent cover and keep the IR light on for 8 hours and put the cover back. This helps to drive the moisture away.
Works a bit to well
link
Thats no where near 30x zoom, 10 max
I learned a long time ago not to use Chinese cameras, for a multitude of reasons. In the long run, it is worth it to buy a quality camera.
could you tell us some reason?
@@sont6739 demonstrably high probability of poor IT security, low build and image quality, poor longevity, and high installation and service costs (having to send a technician out to replace them way too often).... just to name a few....
@@logmeindog I can't speak of the IT security but I have a similar camera that I've been running for about two years now. The image quality is excellent, the IR LEDs are powerful and it's still working fine. Mine has human tracking which works really well, but only during the daytime.
@@Pro1er I guess the good news is that the human tracking feature on your Chinese camera will improve over time. During the pandemic, the Chinese government has been pouring a lot of money into ML and AI camera human tracking algorithms and hardware. They use the technology for tracking their citizens to augment their social credit system as well as enforcing lock-downs.
para colombia
Hola diana te puedo asesorar para Colombia, escríbeme al Gmail kvinortiz@gmail.com. Un saludo
Пальмы, горы... Нихрена куда тебя занесло, бедолага.
Your 30X zoom example is WRONG - it does not work that way. I have a handi-cam from 2011 and the comparison of 30X zoom from that with the new PTZ camera returns the same results over a long distance. I don't think you understand the distance perspective when it comes to field of view and image magnification. Good review otherwise!