Mini Jet Boat Build - Part 1 - Jetstream 12' Buccaneer
Vložit
- čas přidán 7. 07. 2022
- The mini jet boat project begins! In this video a 12ft Buccaneer kit made by Jet Stream Adventure Boats, is assembled!
🛠 Tools and Parts Used In This Video:
Lincoln MP 210 Welder - amzn.to/3uof5AF
Lincoln Spool Gun - amzn.to/3aieLws
YesWelder MIG 250A Pro MIG Welder- yeswelder.com/products/mig-we...
YesWelder Spool Gun - yeswelder.com/collections/wel...
Welding Clamps - amzn.to/3NIGh3V
Welding Gloves - amzn.to/3R2lxXw
👉Other Making Stuff Videos You Might Like:
YesWelder MIG PRO 250 Review - • YesWelder MIG 250 PRO ...
YesWelder MIG 270K Review - • YesWelder MIG 270K Rev...
Diy Tracked Vehicle - • Taking It For A Spin -...
Evolution Chop Saw - • Evolution 15" Metal Cu...
Cheapest Mag Drill on Amazon - • Reviewing the Cheapest...
Horizontal/Verical Band Saw - • DIY Metal Cutting Hori...
DIY Welding Cart - • Making a DIY Welding Cart
DIY Fab Table - • DIY Welding Fabricatio...
🔔 Subscribe to the Making Stuff Channel - / @makingstuff
📢 Making Stuff Patreon page - / makingstuff
🛒 Visit the Making Stuff Amazon Affiliate Store - www.amazon.com/shop/makingstuff
🌎 Vist the Making Stuff web page for more information, Plans, Merchandise and more. - www.makingstuff.info
👉Some of the links on this page are affiliate links. This means at no cost to you, a very, very small commission will be paid to Making Stuff to help cover the cost for projects like this one.
👉Thanks for watching!
(C)2022 TMI Enterprises Inc.
#makingstuff
#minijetboat
#jetboat
#jetsteareamadventureboats
#goodcontentgang - Jak na to + styl
Help me name this boat! Leave your suggestions in the comments.
spirit boat❤️❤️❤️❤️
Me mande o link de onde eu possa comprar esse kit sou do Brasil obrigado.
Skippy
Jet for fun
Larry
FUN! This has been on my bucket list for years.
This is an awesome project. Can't wait to see it finished!
You and me both!
I'm really excited about this project!
Me too! Thanks for watching!
Looking great!
Making Waves
Thanks!
That looks like a fun project. Thanks for sharing 👍
Thanks for watching!
Good stuff! Cool that your doing a jet boat build!
Thanks 👍
Very nice and interesting project. Make sure you have a tether cord and cut off switch installed so when it throws you out of the boat it'll shut down!! LOL!! Looking forward to the next video.
The jet ski has that already built in and yes I will be using it. Thanks for watching!
Nice project Bob, I love it.
Thanks 👍
"Im very happy with the way this weld turned out" lol, no im kidding, im a welder i do custom fabrication all day, and you made me feel good about my welds, awesome project man, subscribed
Thank you very much!
Boat Name: MS ROCKS
People who don't know you will think it's a female who rocks the boat.
Don't discard your pallets.
They make awesome raised beds
Show vc é um artista
My favourite bit was folding the aluminium sheet, great skills you have.
Thank you!
This is going to be a great project to watch from start to finish. Can't wait to see how it turns out! Tryin' to think of a good jet boat name...
Thanks!
you're awesome brotha! this is a great build so far !
Thanks a bunch!
Cool !!!
Great vidéo ! Very fun project !
It has been a blast to work on so far. Thanks for watching!
Brilliant video thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Glad you enjoyed it
This is so amazing, congratulations from Brazil....
Hello Brazil, thanks for watching!
Making Stuff is a good name...
Awesome video bud. This type of content is a++++++
Glad you enjoy it!
We have nearly the same interests across the board. I’ve been eyeing a watts craft for years.
We are a rare breed. I can't find anyone around where I live that is into the same things as I am. Thanks for watching.
That is a lot of aluminum or aluminium. You are doing a great job of welding.
Yeah I was a little intimidated at first but practiced a bunch before actually starting on the kit.
Som’em ain’t right! -for the name.
Just started my boat build yesterday! Same kit as yours but I’ve got the four seat option. Great video and good luck with the build!
Hopefully I'll be able to start on mine again soon. Sometimes life takes you a different direction than what you want to go.
Mantap salam dari Bonek Surabaya Indonesia di tunggu kreasi selanjutnya bos
Awesome project!
Boat names: Boaty McJetFace, DIY JetBy, Bob's Skip
Thanks for watching!
Good job man you may name it Bullet.
Great Job Bob. Good ship Fartgas
Ha,Ha. How's it going in Texas?
Rad!
This is going to be a awesome series you should Name it The broken bit
Ha that is a good name, thanks for watching!
❤ Love
Should be a fun little boat. Silver streak, assuming you leave it that natural color. Maybe too easy, but should be accurate.
Yeah, Silver Streak, like the train 🙃
I like it!
@@bob_mosavo yes, good movie!
Sar very good ❤️ part 2 give ok
Very cool Name on the boat She's squirly Thanks for the video
Thanks for watching!
Hi 🌹❤️🌹honestly you are
an amazing man.
I congratulate you because you have all these ideas for creativity and useful things
I suggest you call this boat
(. spirit boat ) 🌹🌹
Wow, thank you
Ông nên chia sẽ kích thướt .
very smart guy
That is so cool but crazy fast and would you guys able able built a single man cabin boat fishing rig with outboard motor setup that be good investment on sigle man suze boats for any kind of spirts racings or fishing trips 🤞
That's some scary sheet(metal)!
Thanks for watching!
What kind of wheel are you using to grind the welds flat?
Name for the boat "Bit broke" due to the issue with the hull profile.
JET STUFF
Jetboats were invented in New Zealand, so call it Kiwi 👍
LOL, thanks for watching!
what is the correct name of the speed squares with the large flange for you to clamp onto called???
Name: play bouy. I know it’s gonna take some time until it’s ready to hit the water but I’d love to watch this as one big video montage start to finish, like a hour and half long. Either way I’ll still watch tho lol
Good idea, maybe I can do that. Thanks for watching!
Name- "JALO" because it's hot and everyone will want to get in it!
I would love to see somebody take and make this boat using a Jon boat, maybe a 14-footer
I'm pretty sure someone has already done this on CZcams, but yeah that would be cool too. Thanks for watching!
What kind an size of welding machine do u have?
Very cool. How many hours of welding would you say is involved to put this kit together? Also what size mig welder would I need? Appreciate any info. Thanks!
It has taken me a year to get this far. Of course I can't work on it 8 hours a day either. The best aluminum welder I have used is the Yeswelder YWM-211P with spool gun. yeswelder.com/collections/welder-cutter/products/yeswelder-ywm-211p-double-pulse-aluminum-mig-welder?ref=makingstuff
Are all aluminum parts the same thickness? 3/16" or are there any smaller ones?
Smallest is 1/8th inch, thickest is 1/4"
Not questioning since idk much about welding aluminum but I did weld doing a very similar process for about a year making sounds dampening rooms and such. My question is do you have to push your welds? With how thin the material was I was working with usually pushing the weld required either moving really quick and getting a crappy weld or drawing the weld towards you allowing for a larger tac/weld
Yes you are suppose to push the weld with aluminum.
I love the big project that you're doing I love watching your channel and that I do have to ask.... you're doing this great big thing pushing yes welders and my curiosity runs really hard 10 months ago you did a video with the yes welder 250p and you're talking about MIG welding aluminum now here you got this great project putting together a jet stream boat which I love but you're using a Lincoln welder with a spool gun instead of using the yeswelder with the mig gun?????? and I asked a question back when you were pushing the welder about what it can and cannot do so why would you use a Lincoln over to yes welder? and I'm not here to troll you or anything just a quick just a question why the change of heart on the boat??? I'm a long time subscriber so I'm not going nowhere..
That's a good question. The hull of the boat is 1/4 inch. Both machines are rated at 3/16" which is close enough to get the job done. The Lincoln did a better job on the 1/4" so I started out using the Lincoln on the big stuff. I did use the Yeswlder on the brace that I made in the beginning of the video. There will also be some TIG welding in this project which will involve using a Yeswelder product. There are also other advantages the Yeswelder MIG has over the Lincoln which will be shown in future videos.
That boat jump looked like if it had of went any more wrong it would have been a bad day
Do you do this whole project with an aluminum spool gun? No tig welding?
So far it's just been Spool gun.
Mig Mermaid
Độ dầy tấm nhôm là bao nhiêu milimet ?
Супер! Есть у вас DXF файл?
Lazer Hawk
How much was that boat kit?
Can you tell me the standard size?
Mini Nemo
When's the next video coming out? I can't wait to see how this boat turns out
Soon I hope. Thanks for watching!
What welder are you using? Cheers Fraser from New Zealand
I started out with a Lincoln 210MP, but switched over to the YesWelder YWM-211P. I wish I had the Yeswelder from the begining of the project. It works much better on Aluminum. czcams.com/video/YyOiIbskFYs/video.html
Boat name NOT STOPPING
I just bought my own kit from Jetstream which is the same as yours. I haven’t started building it yet but I am researching as much on CZcams as possible. Your first video is great but I was wondering if you could just do a little bit more details on the areas that you’ve run into problems or others could run into problems if they don’t know these little hidden secrets. I’ll keep watching and thanks for video and up coming ones.
Other than the bottom not being cut correctly and the width not being 51.5 inches, I haven't had any problems.
@@MakingStuff bom dia, vc fez um ótimo trabalho !!...sou do Brasil e gostaria de saber onde consigo comprar um kit desse aí ?
Todas as chapas já vem prontas para fazer as soldas ?
Im confused, was this beauty built with your YesWelder or the Lincoln welder ? Thx 🙏
Started with the Lincoln, then switched to YesWelder when they released the YWM-211P. Had the YesWelder been available when I started the build, I would have used it for the whole thing.
@@MakingStuff ok thanks!
Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?
Boa tarde,sou aqui do Brasil quero te fazer uma pergunta qual a espessura da chapa?
Boa tarde, que eu sei a parte de baixo ele usam 1/4"(6,35mm) as laterais 1/8"(3mm) tudo chapa de aluminio 6061 t6
Hi Am inquiring what kind of welding machine are you using make and model?
yeswelder.com/collections/welder-cutter/products/tig-welder-ywt-200dc?ref=makingstuff
"J.B. Welded" (jet boat)
Are you making fun of my welds? LOL. Thanks for watching. Did you stop making videos?
@@MakingStuff it's been slow, but haven't quit
Can I get a map, measure this boat, so I can chop off the aluminum to make a similar boat, with my estimation?
Some assembly required 🙂
I like it. Thanks for watching!
Made something
What brand/model welder and spoolgun did you use?
So far it has been mostly Lincoln MP210 with Lincoln Spool Gun.
How much did the kit weigh?
name... Making waves
Did you get compensation for the mistake?
Not monetarily, but yes they made up for it.
Where did you order it from i need one buddy for thevrivers here near me
www.jetstreamboats.com/
@@MakingStuff thank you sir
Whatz the cost of those welders bro
Lincoln - amzn.to/3uof5AF Yes Welder - yeswelder.com/products/mig-welder-250a?ref=makingstuff
Call it "boaty mc boat face"
Maken Wake
How much was the kit from Jetstream
All of the pricing info is on their website.
how much would it cost to ask a welder for a job for a 6feet boat?
Would probably be cheaper to just buy the hull already welded. The last I looked, Jetstream still offered fully welded hulls.
Jetson
As long as it doesn't sounds like the Jetson's car, LOL. Thanks for watching!
Name it the S.S. Minnow... 😆
You don't look like the Professor, but you look like you could be one.
Just don't take it on a 3 hour tour, LOL.
Trying to watch this with very low volume in bed with people sleeping next door, of course there had to be sirens..🙈
Call it HMS Stuff :)
Thanks for watching!
Looks like a river rat to me, great video.....
Thanks for watching!
How much ps does it have?
ps?
@@MakingStuff oh sorry i meant horse power (0.7 kw)
@@Luderspieler No probllem. It's 250HP.
@@MakingStuff thanks
Hair Raiser
Good One!
BoatyJetBoatFace
Bathtub
A name for your boat “ Broken Bit “ there’s a story behind the name
Good idea. I'm not done with it yet so there may be more stories, LOL.
Alcoa maru
Shaina
Quiero comprar una paga de esas la embiaran a
homunculus
Thanks for watching!
Boop
Broken bits
Stuffinater
Thanks for watching!
I’m a machinist by trade and wish I could afford to start my own shop out of work right now it’s killer to see the stuff you do keep it up for us that wish we could -- you rock man
Q
Wet Dream.
Thanks for watching!
is me take bigboat 911 navy @ everyboat navy@polish rever @sia(puminn-5A)