Te comento en español para que notes la trascendencia del video. MUCHAS GRACIAS por el tip del sketch fuera de la superficie de la escalera, llevo una semana buscando la solución y nadie lo muestra. Sos un crack
Oh I see them now. They do exactly what their names say. Angle Joins defines how railing segments meeting at an angle should join, while Tangent Joins does that when these segments form a tangent transition where they join.
Hi sir ..i have created circular stairs with landing ..and also glass railings ..the problem is that the glass panel is not totally align circular fitted on top and bottom rail?? Plz reply thanku
Well, I can't say much without looking at the file, but the clue is there in your description. How about checking how that last run is different from the rest and go from there?
"EXTEND BELOW RISER BASE" was a revelation ... had this issue for years now. Got it correct at last.
TY so much..
Great you had it working! Enjoy ;)
@@RVBoost I see that this command has been removed / relocated in current versions of Revit.. Can u please let me know where to find it.
Sure, which Revit version are you on?
Just checked and the option is still there in Revit 2020 & later :)
You sir have helped me so much today. Thank you.
Glad I could help ☺️
Te comento en español para que notes la trascendencia del video. MUCHAS GRACIAS por el tip del sketch fuera de la superficie de la escalera, llevo una semana buscando la solución y nadie lo muestra. Sos un crack
Glad you liked it. Enjoy! 😊
You should have put the second connection made longer by 25, igual as in the first joint. But your video is very useful
Thanks for the tip!
Great video
Glad you liked it 😀
i tried this but not working, you have other solutions?
if you offset the handrail profail family from the center, it adjunto on the change of direcction and you can draw a continuos handrail...more or less
Thanks for the tip! I'll try that 👍
Not bad, only if you have a glass railing better make the railing in sections
There r two option in type properties angle join and tangen join what were they r ..and how to use this plz reply thanku ...take care
I don't have that option. So Strange. Which Revit version are you using?
Can we number stairs is we make staircase by sketch . I have problem annotating staircase by sketch
Yes, try Annotate > Tread Number.
How can you do this with monolithic concrete stair railing??
It should work the same way? Did you try?
U have this option see at time 1.54
From where u set baluster placement. See down to two row
Oh I see them now. They do exactly what their names say. Angle Joins defines how railing segments meeting at an angle should join, while Tangent Joins does that when these segments form a tangent transition where they join.
Hi sir ..i have created circular stairs with landing ..and also glass railings ..the problem is that the glass panel is not totally align circular fitted on top and bottom rail?? Plz reply thanku
Hi, could you send me a screenshot of your stair so I can see exactly what the problem is?
@@RVBoost ok ..will send
@@RVBoost can u send me ur mail id i will send u the project
Sure. Its support@rv-boost.com 😀
@@RVBoost hi ...i already send u mail plz find rvt file thanku ...and my panel also smaller ....panel width is 2'.
My railing sketch line on the stair but the railing still wont angle :( I have moved to the centre of the stairs and still wont work
You will also need to select the railing and use Pick Host to select the stair as its host.
@@RVBoost I have done and it still won’t work. It works fine on the other 6 flights just not the last run
Well, I can't say much without looking at the file, but the clue is there in your description. How about checking how that last run is different from the rest and go from there?
Hello 😀👋 can i send you an image please with 2 type of stair for you to consider for tutorial please
Sure! Please do 😁
@@RVBoost whats the email🙂??
It's support@rv-boost.com
@@RVBoost I already sent it
Great, I'll do them as soon as possible :)