Video není dostupné.
Omlouváme se.
How To Replace A Lamp Socket
Vložit
- čas přidán 6. 08. 2024
- In this video, I replace the lamp socket for a 3-way bulb. This procedure is similar for a standard (non 3-way) bulb socket like a push-through switch. Make note of the wires as you take the socket apart, mine were NOT colored individually and are easy to mix-up. Hot/ Live/ Black wire goes to the gold/ brass terminal, and the Neutral/ White wire will go to the silver terminal.
**Always exercise caution when working on any electrical device, and make sure it is unplugged and powered down before performing any kind of service**
Part used:
- 3-way lamp socket: amzn.to/41YevaE
Filming Equipment:
-Head and chest strap mount: amzn.to/3OHOwka
-iPhone 14 Pro clear shockproof case: amzn.to/3OpYAxb
-iPhone 14 Pro: amzn.to/47ndyfN
(I may earn a commission from the affiliate links listed above).
Video Timeline
00:00 - Intro
01:31 - Removing lampshade and bulb
01:51 - Removing old socket
03:11 - Replacing light socket
05:50 - Securing new socket
06:20 - Testing - Thanks for watching!
Thank you so much for making this video. My lamp fixture is exactly like this and I was looking for a lamp repair store. Now I can do it myself. 🙏🏽🤗
Thanks, I had the pushed in type of wires, so had to pull gently to extricate them, and had to cut a bit of the vinyl housing to pull more of the wires to hook them over the screws for the new socket, but heck it worked!
Thankyou Sir , I have matching lamps and this was very helpful! I would not have known the gold screw on new fixture was positive. I marked the positive wire but I cut the wires off the terminals so I’ll have to strip them back . 😀
Hi Ryanrepairs