Video není dostupné.
Omlouváme se.
Einhell Petrol Scythe GC-BC 52 I AS ( brushcutter ) - Unboxing + Assembly + Tryout
Vložit
- čas přidán 8. 08. 2019
- Einhell petrol scyhte GC-BC 52 I AS (brushcutter) for home and small place.
A good choose for everybody who don't want an expensive maschine and not a professional worker.
Easy assemby, avarage weight, strong motor, "quiet".
Support my channel with a like and subscribe for new videos. Thank You!
Patreon: www.patreon.com/flagellumdei
After a few working hours the machine will be better and better. Easier start, stronger.
.
how many hours did it take to start fine? just bought one and i dont want it to be hard to start.
flagellum Dei .
@@Ryan-eo1dw First 1-2 fuel tank just easy, use minimum half synthetic 2t oil, but full synthetic is the good, in 1:40 mix. After 5-6 fuel tank and will be good.
@@Ryan-eo1dw I use now Husqvarna 2T XP Biosynth Professional, not cheap but good, low smoke, or sthil HP Ultra. And few oil have fuel additive for E10, but im use just premium fuel with low etanol.
a very nice display of the GC BC 52 1 AS petrol scythe a big thumbs up from me
Thank you for showing in detail how this machine is :)
You're welcome! Pretty long video, next time i'll accelerate few frame.
Thank you for video. Im in Turkey. I had not found video for einhell 52.
UR welcome! 🙂
Fangt bei 20:00 an und ihr spart euch Lebenszeit
🤣👌
I must say I’ve had mine now for 2 months and it’s VERY powerful, the only downside I have is it’s noisy and it also is pretty hard to start if you are not strong as the pull started fucking flings back on your fingers witch is not very nice but overall I’m impressed but starting it is a pain.
Try change the spark plug for a better, but first check the tightening and spark plug gap. Digital ignition, and the auto choke not good in this product. Other method:1.primer pump 10x, 2. try pull the recoil without ignition, with choke for 3 times (3X in other language), 3. then add the ignition and without choke start it. Thats the classic, old 2t motors trick from Husqvarna description in 1980. :)
My method simple, primer pump 10X, ignition+choke and need 7X pull avarage. Its the auto choke and the digital sh*t fault in my opinion. Better motors start with max 3 pull.
Finally try tightening all bolts and the motor, exhaust outside, if you are know what to do.😀
flagellum Dei I found something new, when the day is hot I leave it outside for about 5 mins, then go out and leave the choke OFF the it only takes me 3-5 hard fast pulls
I got a new method of starting this, leave the engine out on a warm day for 5 mins. The I go outside and leave the choke OFF prime it 6 times (I find 10 is too much and 6 is fine) then give it 3-5 rapid pulls even if the pull cord doesn’t go far then for me it starts.
😄easy😄
flagellum Dei yep
In the video, the most important parts of the starting are missing, like when did you turn off the choke? After how many pulls on the starter? Or you leave the choke on until engine start?
Yes my cam pod away this time.... But you hear it :)
Great video, off to buy one.
THX! 😀
Is it still in working order till this day?
still working and in hard work in tall jungle most of it
Just got a new one. Wint start and Einhell won't honour's wnty.
Have a friend who has one and she asked me to put a blade in it but I couldn't figure out haw it fitted. I've used brush cutters all my adult life I've got a Makita that is easy to put a blade on. The Einhell seems to have the raised adapter to drop the hole of the blade on am I missing something only other parts are the protective cone a flat washer and the lock nut. Any advice would be helpful . Thanks😊
You only need the lockable joint (washer) under the knife, it will center it. After that, the plate-shaped tensioner, then the nut screw, which has the opposite thread.
Hi mate, thanks for the detailed video. I am stuck between getting this and the Einhell 4 stroke equivalent (both £150 at toolstation). I know the 2 stroke will have more power. Which would you go for? Very little information online about the 4 stroke. Thanks
2 stroke better i think, less parts in the motor, less failure option, no oil change, but you need mix the fuel, smelly, and for power need a higher rpm.
4 stroke motor torque better in low rpm, less smelly, little quieter, but bigger chance to mechanical problem, need oil change.
Simple things always cheaper and durable, so i favorize 2 stroke at time. What you needs, durable or quiet, hp or torque? Its a dirty job so comfort secondary on my opinion.
Check a few 4 stroke video for the conclusion.
Bandit PLEASE GET THE 4 stroke
@@flagellumdei8429 I'm new to all this and looking for a good bush Wacker as I've just moved into a house and garden is extremely over grown with brambles and such. What the 2 stroke and 4 stroke I don't understand and how dose this machine stand up to doing s heavy job?
@@glogloilla3539 If you dont know what is the difference between 2 stroke and 4 stroke, then hard to explain. You found video from this in youtube.
You need a simple 2 stroke machine, with a strong head for brambles. This 50cm3 Einhell not bad, strong, but the factory trimmer head weak to brambles, but you can buy one: www.amazon.com/s?k=brush+cutter+head&ref=nb_sb_noss_2.
2stroke engine need mixed fuel, 1:40 or 1:50, 1liter oil to 40 lilter fuel, or 25cl oil to 1l fuel, its just math.
What are the difference between this 52 cc and 43 or 30? And what kind of oil do you need to use?
Stronger, for home enough a 35 cm3. 1:40 mix ratio, 2T oil, i use Husqvarna low smoke oil, full syntetic.
@@flagellumdei8429 I don't know if we have this in UK. Also can you make a video on the nylon line. How to fasten it? Because I think mine is missing a part
I:25 ratio @@flagellumdei8429
Köszi a videót! Én most vettem egy ilyen fűkaszát. Ennyi év távlatából mi a véleményed? Mondjuk az fájt a videóban, ahogy az első indítás után a betonon pattogott. :-D
Neki nem fájt, én azt vallom a gép van értem nem én őérte, bírja. Meglepően jól bírja, a háromágú késsel bozótosokat vágtam már ki vele, ennyi pénzért jó vétel volt, azóta persze kicsit drágább. Kell rá egy normális damilos fej, mert a gyári egy hulladék.
@@flagellumdei8429 Köszönöm a választ! Cserélem a fejet.
How do you change / re spool the line on this machine
czcams.com/video/1LIL6cHaue0/video.html
Edit to all my comments: my strimmer broke, one day cord was all snapping back so I pull my hardest and the whole engine just come apart inside, felt rough when pulling on cord so I took apart and saw that the whole metal contraption inside had snapped in half. Opened the engine up and I was actually disappointing to see how cheaply made it was. Sent it back got a full refund and now I’m just getting a 26cc strimmer instead.
Cheap or not, my tool work good, start good.
flagellum Dei that’s great
Hi, I from Chile, my question is the use this machine is continued or with pause?... Thank
Not a professional tool, best for home, little farm. I never break for cooling, but using performance 2T oil and premium gas. If you want performance then a Stihl or Husqvarna.
@@flagellumdei8429 muchas gracias my friend
Where do you put the oil yes of course I want to know
2T motor, in the gas 1:40 mixture
he is just motoring through that grass like it was candy floss. Looks very powerful, more powerful then my electrical one
good one
Hey, thanx for the usefull video. I Am about to buy this one. Are you satisfated?
Yes, good one for weekly 2-3 hour. Last time used in a 1 meter tall "jungle" with blade, and worked well. It shakes a little, but it's not dangerous.
Did you not put oil in the engine first?
Not bad idea but no.
Bien
Buenas noches. Y el filtro de aire que tan bueno es?
Is it still good? Do you recommend it? Have you had any problems?
Still good, not bad, but the before "blue cover" series was better. Cold starting not perfect, because auto choke system, but if warming-up staring very easy.
Cheap, strong(50 cm3), for weekly 1-2 hour good, for professional working not. Better than a Straus and his friends.
@@flagellumdei8429 Thanks. I have a 5500 square meter orchard and I wan't to buy a brushcutter to get rid of the grass and weeds, so I'm considering this one.
Emre I’ve got one and all I’m gonna say, it doesn’t go through much fuel, also it cuts pretty tall grass on half throttle. This thing is a beast don’t buy if your garden isn’t that big. The one problem I have is starting from cold can be hard, if you are strong then it will be easy for you. When you first get it it may be really hard to start but if you leave it running for 20 mins idle for 1 day in a week it will soon break in. Good luck and I recommend this.
@@Ryan-eo1dw Thanks. I ordered it online. I'll see how it does.
Emre good luck :)
Lad can you please tell me how to put the wire in them properly it would mean so much to me honestly please
For the stock trimmer head you need originally 2.4 mm wire (nylon trimmer), but few type 2.4 mm wire not good for this head, because slip out fast from the trimmer head(made in China). 2.7mm wire better option i think. The load process very simple, just take a 3-4 meter wire, fold it in half, and wrap up. Half the wire in one lane other half to secound lane. If you done, stick the 2 wire in the nearly outsides holes. Now take the heads cover, attach the 2 wire to the head, press, and your are DONE. XD Don't forget the spring and 2 washer.
If you'll be my time, i make a video, but on the youtube you find one.
Easier if you buy a "load and go" trimmer head.
MTD ONLY
I don’t think there would be much difference between the two.
If you want performance then Stihl or Husqvarna.
Good video...bloody annoying music!!!
This is a very difficult machine to use
Like all similar bruscutter in this category. I think nothing difficult just need a little experience if u r not interested in this.
I try to follow the start procedure as it's written in the manual but this fcker just does not want to start.
1. Primer pump 10x times
2. Ignition On
3. Choke On
4. Pull on the starter two times
5. Choke Off
6. Pull on starter 4-5 times
Also, it's very hard to pull the starter. I know the compression is very high because the engine is new but... The 'Easy start system' sign at the side of wrapping is ridiculous, yes it's easy if you have an arm of a gorilla. In the video, the most important parts are missing, when did you turn off the choke? After how many pulls on the starter? Or you leave the choke ON until engine start?
First check the spark plug, if need tighten it.
The main problem with the start, the cutter not have "half throttle" lock, so the standard starting method not good.
Standard method for 2T motors in days like chainsaw: 1. start with choke(primer pump if have) until 1 time fire, 2.then choke off and continue starting to fireing.
Most of brushcutters have "half throttle" lock on the horn, to start you need lock it and the same starting method.
This Einhell series not have half throttle, its a shame, because if you keep the throttle half start easier(cable tie to throttle).
So my method: 1.primer pump 10X time, 2.choke ON, 3. starting until fire with choke, this is 5-8 pull or more first time. After the motor warm start very easy without choke.
The motor need 2-3 tank fuel out for better work, until just easy with the throttle.
Use 1:40 mixed fuel, 1:50 weak for this. A full syntethic based 2T oil is the best for this cutter and etanol less fuel, like premium.
@@flagellumdei8429 I left the choke on until engine started as you wrote, not just for 2-3 pull as the manual describe. Also a good pulling technique is importan to learn for engine start, you should stretch not just your biceps and forearm but also your shoulder and back muscles, also use the momentum by turning your whole upper body a bit.
I was a bit worried because the first start was hard, after wearing out 3-4 tank of fuel it's much easier.
very very bad camera and vide, autofocus is not fix, very bad for watching
Old phone dude years ago 😂What do you need Marvel movie?
How can you produce a demonstration video then play this horrible music🤦🏿
mute