Video není dostupné.
Omlouváme se.
How to Install a Keyless Entry System - Paano Gawing Keyless Entry ang Sasakyan mo?
Vložit
- čas přidán 1. 02. 2021
- - How to Install a Keyless Entry System - Paano Gawing Keyless Entry ang Sasakyan mo?
- How universal keyless entry works
A demonstration how keyless entry system can be used in different scenarios:
- Cars with full central lock system - these cars usually have an electronic button to lock and unlock all doors.
- Car with partial central lock system - these cars are almost the same with cars with full central lock, the only difference is the main door doesn't have an actuator and it doesn't
have a electronic button to lock and unlock the doors.
- and for cars without central lock system.
Product link: s.lazada.com.p...
Thanks a lot bro , napaka linaw Ng demo mo , na appreciate q effort mo.. more power! Nasundan q diagram 🙂👍
Thank you po
Thank you for this clear and easy to understand guide.
Thank you
gawa ka pa maraming videos mo sir.. very helpful talaga at sobrang galing mo in fairness.. hope marami mag like at mag subscribe sa channel mo kase it's worth naman talaga.
Thank you Sir at na-appreciate nyo po.. Godbless po..
Hello sir good morning may itatanung lang aq regarding sa keyless Entry ALARM SYSTEM kung na may LOGO na TOYOTA pero Ang sasakyan q NISSAN pwede q ba iinstall sa Nissan Yun? Ty
Napaka linaw po ng mga tutorial niyo sir madali masundan. Thank you for this video.
Ordered items arrived today. Was able to wire up and simulate following your vlog. Very helpful and many thanks to you sir
Thank you for your support 😊
Thank you sir. I’ve done mine as easy as one two three. Thumbs up sa video mo. Easy to understand.👍🏻😍
You're welcome po, I'm glad my videos helped you.😊
@@PinoyBuysAndDIYs sir pakigawa ng Sa akin pausap usap na🤣🤣🤣
0
0
Salamat po. Now makakabit ko n ung binili ko n keyless entry sa lazada. Mabuhay ka. Good job
Ayos sir. Buti nakatulong👍
salamat bro ang dami kong natutunan, diko kasi alam itong pangalawa itinuro mo, ang alam ko yong una pero nagawaan ko rin ng paraan na hndi na ako naadd ng actuator, ang pinutol ko ay wire ng actuator sa central lock kaya taas baba din xa at sumasabay dn lahat ng door
Salamat sir sa pag explain. Nalinawan ako kung ano dapat kong bilhin.
Thank you din po
Thanks po sa clear tutorial. Installed na po yung sa akin and all working na. San ko po maganda i-tap yung sa direction light?
Very helpful tutorial Sir, ang galing mo mag demo. Thank you so much.
Thank you din po😊
thanks idol malinaw ang pag kaka deliver..very informative video
Salamat s Dios, may nakuha kahit konte..
Thank you verymuch for this clear and easy to guide explain.
salamat sa video, comprehensive at madaming matututunan. husay!
Thank you sir, malaking tulong po, more power sa channel nyo.
Thank you very informative step by step installation for DIY.
Maganda alternative siguro sa power window line is gawing “follow me home “ system lagyan lang on/ off switch kung gusto mo i disable at isang relay. Balak ko din bumili neto kasi ty sa idea.
Magandang idea yan ah boss.. pwede.. sa mga bagong sasakyan ngayon ganyan... thanks. Try ko implement. Padaanin ko nlng sa relay. Thanks thanks.
Ok po, subukan ko din, thanks po
Galing naman very informative dami kong nalaman.. salamat boss sa pag share ng kaalaman..
thanks sa demo boss,napakaliwanag na tuturial demo👌👍
Thank you... For nv350 pwede lagyan nang pareho sa pinakita mo
Very Informative po,will try to ela tra 2017, not keyless. Thanks
Daghang Salamat Bro.
Thank you sir ang clear ng topic
Salamat sa video tutorial. Galing!
Very helpful tutorial. Thanks!
salamat Po sa informative video mo. Nag DIY Ako paps Ang problema ko Yung sa signal light left side lang Po Ang nailaw Yung 2 brown wires nakabit ko naman sa linya.
salute boss,, ang linaw ng pg kka explain
Thank you boss. 😊
okeng ok boss ang vedio mo boss nakoha ko lahat thank you boss....
very helpful info thank you po.
Idol, salamat sa idea, recquest sana, yong nessan urban350 naman po, paano ikabet yong keyless,
Nice video paps.. question lang sana, wala sya wires for siren, paano sya lagyan ng siren kung sakali paps?
Thank you.
Very helpful, thank you !❤
Very good explanation...thumbs up.
Salamat po PinoyBuys and DIYs
Many thanks for the clear explanation!
Your welcome sir. thanks for visiting my channel.
wOw 😮, thank you so much for the clear detailed demonstration and easy to understand.. i did subscribe your channel..
Thank you po😊
Very informative video bro. Thanks.
Very informative bro.
Well explained
Thank you Sir😊
galing ang linaw lods
Sir thanks galing
Concern ko lang sir pano hook up yung horn pag sabay sa lock at signal light sana matalakay mo thaks again, good luck
Nice demo. Thanks
Thank you Sir😊
Salamat boss ma solve kuna Ang problema ko
Nice! 😊
Ang ganda ng pagka paliwanag mo sir salamat po
Salamat din po sa pagtangkilik😊
unfortenetly this has no auto trasnlation, at least for me, but even without understanding the language the video was very helpful thank you.
Thank you sir, will try to add subtitle on it.😊
@@PinoyBuysAndDIYs hello again, i wanted to ask if the turn signals output from the entry system box, is measurable with a multimeter when you close and open the doors?or you can only do it using a test light?i have 0 volts coming through the brown wire. My box is conected on a negative on the body of the car, does it have to be to a negative from the batery or works the same?thanks in advance my friend
@@Fast_Lane_RC @Ricardo Pires you mean measurable when you lock/unlock using the remote? Yes, it should show a voltage, however that will just be quick because its just a blink, so it depends on your multimeter, if it has a delay, it might not give you a result, that's why using a test light is better in that case.
For the ground, yes as long as your car body has a good ground, it should work the same. You can test it using your multimeter. Give it a positive line from battery then tap the other probe to body, if it gives you a good 12v, then you got a good grounding.
@@PinoyBuysAndDIYs ok that was exactly what i was asking my friend thank you very much for your help, i will try to measure again using other multimeter i have, i might buy a test light cause its not the first time i need it. peace
@@Fast_Lane_RC you're welcome sir👍
Tnx! wel xplained.
Thank you for this sir. Napaka informative
You're welcome po
@@PinoyBuysAndDIYs Sir, question po. Yung nabili ko po kasing sasakyan, Nissan, nainstallan na daw po ng keyless entry noon kaso nawala po yung susi. Need po bang palitan yung mismong keyless system? Or kahit yung pinaka susi nalang po nya? Sorry po, newbie po kasi ako sa sasakyan since first car ko po ito. Salamat po
@@KristaKyuEunHae kung makikita nyo po ung module ng keyless entry system, check nyo po kung may button sa likod. Pwede po kcng mag learn ng new remote ung mga universal. Usually long press lng po un then pindutin ung univerasal remote.
Ayun. Maraming salamat po Sir. Sobrang helpful po sa newbie na tulad ko. Ang helpful po ng videos nyo, new subcriber po ako😊
@@KristaKyuEunHae you're welcome po, thank you din.
Napaklaro, thank you! More power sa channel mo!
Salamat po.
Excellent instruction thank you so much!
Thank you..
Thank you for your DIY detailed installation.. mabuhay ka brader…🎉🎉🎉🎉
pano po yung sa remote trunk release? very clear ang tutorial idol
Sir paano po mag reset/reprogram ng ganyan? ayaw kasi gumana ang unlock sa isang susi, tapos sa duplicate key naman ayaw mag lock pero nau unlock
Sir question lang po. Pwede po ba lagyan ng tunog tuwing mag lock and unlock??
Pwede sir, lagyan nyo lng po relay. May video din po ako tungkol dun. Tapos po mas maganda pag bumili kayo ung may wire n na siren agad, ung jan po kc sa video pang blinker sya.
nakita ko review mo sa lazada npdalaw ako dito paps!
Ayus paps. Sana nakatulong ako sa project mo..🙂
thank you.. natapos ko na sa akin
Anim na wires lang gagamitin para sa central lock
Red para sa B+ o Positive
Black para sa B- o Negative
Yellow at Yellow with Black kasama sa Negative
White Close signal
White black Open signal
Yan lang para sa lock system.
Thank you po sa comment. Stay safe po.
Jan din po bang banda sa ilalim ng manibela makikita ung pag tatapan ko ng wire para sa signal light? Para sumabay signal light pag nag lock?
Sobra linaw bro.
Salamat Bro.. Godbless
Thanks for the info. New friend here. 🙂
Salamat sa pagtotoro sir
Idol paano ikabit yung dalawa na puti na wire sa central lock.dun ako nagkaka problema kasi di ko mapagana ang remote na bago.di nman siya actuator kundi kelangan sa central lock na parehong negative trigger
Good job sir idol pasout out po salamat.
So meaning po need ko pa bumili ng central lock kasi wala po ako nung pinakita mo sa car
new subscriber here! ask ko lang paps, about jan sa nabili mo kung tumagal ba, thanks more power,,
Yes po.. since yang video na yan.. until now. gamit ko parin po.. gumagana parin po. thanks for subscribing po :) Godbless
nice bro
Sir.. ask ko sana kong pwede po ba lgyan ng tunes ang keyless entry system para twing i lolock mo or i unlock mo i nalalaman mo kong nag unlock pag may tunog salamat po sir
Pwede naman po. Pwede nyo pong gamitin ung para sa flasher/signal lights. Kung busina po ilalagay nyo maglagay nlng po kayo ng relay. Kc malakas ung draw ng current nun.
wigo ko po hindi gumagana ang unlock pero tumutunog naman yung entry system, lock lang po yung nagagawa
hello sir ask ko lang
yung sasakyan ko meron ng central locking
may naka install na module para keyless entry
isang actuator lang ang ginamit nakalagay sa driver side at 2 wires pang blue and green
nung icheck ko ang actuator ang hina ng galaw ng motor ng actuator
nung itap ko derekta sa battery malakas naman
bali buli ako ng bagong actuator ganun pa rin sir mahina parin ang motor halos di nya ma itulak yung rod ng central locking
2nd hand sir nabili ko yung Hyundai getz 2004
possible ba na luma na yung module kaya mahina na supply ng kuryente para sa actuator?
salamat po sir aa sagot 😊
Goodday po sir,pwdi po ba niyo e demonstrate kung paanu mag tap o ikabit yung wire para sa signal po?Thank you!
Boss san ba ikakabit yung positive at negative sa mismong kotse gusto ko unlock at lock lng e salamat boss
boss dun sa number 2 na sitwasyon..na sinabi nyo.. ung partial pwede ba gamitin ung master actuator? yung 5 wires..., o yung single slave actuator lang? na may 2 wires?
Slmt sir
good morning! ano pong brand ung keyless remote po? thnx
sir god day, paano po ang pagkabit ng siren? or saan itatap yung para sa siren ng alarm?
Paano ba malaman na common line sa drivers side anong kulay
sir ung actual mo s last vid. nka 5 wire b ung main actuator o 2 wire lng?
kudos and thumbs up
Thank you po, sana nakatulong.. Godbless..
Boss pwedi ba maduplicate ang remote?
thanks much sir pwede ko na pala lagyan ng keyless yung car ko.tanong ko lang kung same lang ba lahat ng color coding ng mga product na keyless .or ano pala ang brand ng keyless system na ginamit mo sa video para yan lang bilhin ko.new subscriber here feom cebu.GODBLESS you always sir.thanks
Nasa description ung link sir.. iba2 po sila ng colo coding. Minsan may pareho. Pero usually naman sir meron silang diagram katulae ng sinundan ko.. thanks sa subscribe po. Godbless din.
Sir di ko makita sa wigo tru test bulb yun humihingi negative signal .
Good video! How do you cut the remote key?
sir panu po hanapin lock atvunclock ginaya ko po ung tester body ground pero ayaw po react ng acquator
boss ask kolang po. yung car ko kase ayaw yung key remote pero ok bat. the pag sinusihan mo at nag off yung central lock sa driver side lang gumagana. kaya po ba hindi gumagana kase yung 3 door hindi rin?
madali masira keyless...
Tiyempuhan siguru Sir. Since mura nga lang siguro nga hindi premium ung quality. Pero ung akin so far ok naman simula ginawa ko yang video hanggang ngayon..
San ako pwede magclip ng positive wiring galing module master?
Sir pano konek sa break ang locking system
Galing boss god bless
ayos ang video kumpleto ang paliwanag. boss safe po kaya ang receiver ng keyless, iniisip ko lang kasi universal sya kaya baka madali makopyahan ng same codecs ng remote at madali mabuksan ng ibang remote? salamat..
Yan hindi ko masasagot sir. Pero i believe safe naman yan, matagal na ung mga universal keyless entry system. Hindi naman basta2 macocopya ung code nun unless hawak nila ung remote mo to copy using a device..
Sir , sana meron din yung connection ng para sa mga van na may sliding door na may electrical contact.
Boss bakit walang kulay pink for siren ang module na Yan?
WOW yes you
Pwede po pa demo yung sa Fig.3 naman. if positive signal ang kailangan? thanks!
Magkano pagawa ng susi, after market ang remote, hiwalay ang susi sa remote. sa montero glx model 2015.
Sir pwde po b gawin yan sa hi ace 3.0 2021 model
Boss may honda crv ako ayaw gumana keyless entry system ko, ano kaya sira?
thanks po
Tnx😊
Salamat its clear
Thank you din po.
boss paano wiring ng trunk pano paganahin?