Simple editing, but he obviously put a lot of time and effort into making it look as natural and perfect as possible. You don't quite believe what you saw the first time, you have to back up and watch it again more carefully. Simple or complex, many editors don't bother with that extra effort. And it shows.
!!!! Wow Amazing Project Now wondering do Ya Share your Plans or do we have to Bye them ya hav not shown us how to build this in Measurements ? Just asking thks again for Sharing wood be nice to make this cause could use it On the Farm Carry on hope to hear from ya
Super vielen Dank für die Inspektion und Arbeit ❤ good?!Free Ukrainá ❤ good Job Tak Respekt for your Inspektion Cool ❤ Power too the Peapel are help Normalà ❤😂 Tanks for this old school Gun
don't think its fair to say "DIY" with the i'm guessing thousands of dollars worth of tools. that being said.. the production is damn entertaining and was cool to watch. made me envious that i was never taught how to work with wood like that
************************* BONJOUR AMI DU BOIS, ET DE LA RÉALISATION DE FILMS ! YOU HAD MADE A VERY GOOD SHORT MOVIE : GOOD SHOOTINGS, GOOD EDITING, NO STUPID NOISY MUSIC. I LIKE YOUR DIRECTION AND ACTING. I KEEP THIS MOVIE IN MY COLLECTION OF DOCUMENTARIES. HAVE A NICE, AND CONTINUE YOUR ART. MERCI. PAM. **************************' ....
But since I don't have so many facilities and tools, I made my own gun based on air pressure, using a small bicycle air pump, using white water pipes for the air pressure tank, from a pressurized plastic sprinkler that is connected to a water hose, For immediate air evacuation, i.e. as a gun trigger that I have connected to it through multilayer gas transfer tubes and aquarium glue, I made the gun tube from two parts. The first part is the metal tubes of car or radio antennas. And the end part of it I used the compression spring of the door, when I didn't use the spring when I was recovering very slowly, I could see the metal bullet that was shot, but after I put the compression spring at the end of the barrel of my gun, because in The end of the metal bullet travels through the tube in a circular rotation and as it comes out of the gun barrel, its speed increases so that I can no longer see the shot metal bullet with slow motion , meanwhile, at the beginning of the gun barrel,I attached a small magnet is placed under the barrel until I armed the rifle with a metal bullet, and the bullet is held by the magnet in the beginning of the barrel of my gun, and the bullet never comes out of it by bending my gun.
The wire loops are set into rivets. The rivets are inserted within the rubber tube then crimped on with zip ties. He arranged it so that the zip ties would cover the most surface area, compressed rubber provides a very strong friction grip/fit. Maybe he also invisibly added a drop of superglue into each end, but I think that would chemically damage and weaken the rubber.
Ur work was good n great but i became dissapointed in the last clip where u finished making the gadget or tools but didnt show us properly the way it works. U should have shown us the gun clearly n than shoot 3 4 times with clear view.. 13 min waited to see how it looks n works but within 1 sec ends up why?? It feels lyk i hav wasted 13min for an overall 1 sec outcome After making n not showing perfectly it doesnt make any sense though, so keep in mind the feedback i have given. Thank you🤗
************************ WHEN YOU SHOOT THE WATER BALLOON, WHAT IS YOUR DISTANCE IN METERS ? I BEG YOUR PARDON FOR MY POOR ENGLISH, BUT I HOPE YOU UNDERSTOOD ME. MERCI. PAM. ****************************
I was kind of interested in seeing how you assembled the launching mechanism (at 11:30 and after.) Too bad you were more interested in smartass video jokes.
Сегодня же сделаю. Такой же!! И в сейф
combined with magic, very good!
Best slingshot design, I like it
Great presentation. Funny too!
NICE WORK BRO ITS AMAZAING 💖
Un trabajo bastante limpio y bien realizado me gusta aunque se mira con poca potencia de disparo
Bien elaborada gracias por el video
Great wood work!! I want one myself))
Amazing woo
bravoo artiste bricoleur une belle vidéo
Editing Champion of the World right here!!
Lol just simple editing, i dont see anything unusual in there
Simple editing, but he obviously put a lot of time and effort into making it look as natural and perfect as possible. You don't quite believe what you saw the first time, you have to back up and watch it again more carefully.
Simple or complex, many editors don't bother with that extra effort. And it shows.
good job, well done. its wonderful gadget.✌👍👍👍
Brilliant!
Great wood work!
very cool work, the master knows how to do, cool operator movements🥰🥰😍
good...job
Cool, great job!
Beathiful Very Nice 😃
!!!! Wow Amazing Project Now wondering do Ya Share your Plans or do we have to Bye them ya hav not shown us how to build this in Measurements ? Just asking thks again for Sharing wood be nice to make this cause could use it On the Farm Carry on hope to hear from ya
*That's it, my friend, you look so crazy*
😮 magic
Thanks for this. That's my neighbours cat sorted.
Super vielen Dank für die Inspektion und Arbeit ❤ good?!Free Ukrainá ❤ good Job Tak Respekt for your Inspektion Cool ❤ Power too the Peapel are help Normalà ❤😂 Tanks for this old school Gun
Nice 👍
Could you please give us the template? Highly loved!!!
Great 👍
I wonder if u can do the riffle like that🤔
don't think its fair to say "DIY" with the i'm guessing thousands of dollars worth of tools. that being said.. the production is damn entertaining and was cool to watch. made me envious that i was never taught how to work with wood like that
Very funny, i want my 13 mins back.
quá hay
*************************
BONJOUR AMI DU BOIS,
ET DE LA RÉALISATION DE FILMS !
YOU HAD MADE A VERY GOOD SHORT MOVIE :
GOOD SHOOTINGS,
GOOD EDITING,
NO STUPID NOISY MUSIC.
I LIKE YOUR DIRECTION AND ACTING.
I KEEP THIS MOVIE IN MY COLLECTION OF DOCUMENTARIES.
HAVE A NICE, AND CONTINUE YOUR ART.
MERCI.
PAM.
**************************'
....
very cool. love your work. fantastic workmanship…. 🛠️🔩⛏️🔧⚔️👏👍🍻🍻
But since I don't have so many facilities and tools, I made my own gun based on air pressure, using a small bicycle air pump, using white water pipes for the air pressure tank, from a pressurized plastic sprinkler that is connected to a water hose, For immediate air evacuation, i.e. as a gun trigger that I have connected to it through multilayer gas transfer tubes and aquarium glue, I made the gun tube from two parts. The first part is the metal tubes of car or radio antennas. And the end part of it I used the compression spring of the door, when I didn't use the spring when I was recovering very slowly, I could see the metal bullet that was shot, but after I put the compression spring at the end of the barrel of my gun, because in The end of the metal bullet travels through the tube in a circular rotation and as it comes out of the gun barrel, its speed increases so that I can no longer see the shot metal bullet with slow motion , meanwhile, at the beginning of the gun barrel,I attached a small magnet is placed under the barrel until I armed the rifle with a metal bullet, and the bullet is held by the magnet in the beginning of the barrel of my gun, and the bullet never comes out of it by bending my gun.
is this awesome or AWESOME?!
Can I buy a copy, sir? i love it very much
Tôp 👍
can u please give us the blueprints? id love to try to do one like this
Pppppp
😮😮
打猎也行!
Круто
where did you get the metal bit that goes into the rubber
The wire loops are set into rivets. The rivets are inserted within the rubber tube then crimped on with zip ties. He arranged it so that the zip ties would cover the most surface area, compressed rubber provides a very strong friction grip/fit. Maybe he also invisibly added a drop of superglue into each end, but I think that would chemically damage and weaken the rubber.
Cho hỏi nhờ day chun đó mua ở đâu vay
Where can I buy this bungee cord
Hay
12:42
Ur work was good n great but i became dissapointed in the last clip where u finished making the gadget or tools but didnt show us properly the way it works. U should have shown us the gun clearly n than shoot 3 4 times with clear view.. 13 min waited to see how it looks n works but within 1 sec ends up why?? It feels lyk i hav wasted 13min for an overall 1 sec outcome
After making n not showing perfectly it doesnt make any sense though, so keep in mind the feedback i have given.
Thank you🤗
All the work to show how he punches a water balloon...!?!?!?
************************
WHEN YOU SHOOT THE WATER BALLOON, WHAT IS YOUR DISTANCE IN METERS ?
I BEG YOUR PARDON FOR MY POOR ENGLISH, BUT I HOPE YOU UNDERSTOOD ME.
MERCI.
PAM.
****************************
no entendi el mecanismo
I was kind of interested in seeing how you assembled the launching mechanism (at 11:30 and after.) Too bad you were more interested in smartass video jokes.
Why not, i like the jokes lol
This guy's magic is next level 😲😲😨😨
Sıfır
AMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMAaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIINNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
Sweet dude, i'm gonna shoot my neighbor's dog with this!
You skip too many steps
Woodworking with gloves on? Dangerous.
一
Довго і не зрозуміло.
And then he punched the metal on the vise jaws vs the anvil portion of the vise... Boo...