My RV Leveling system got stuck at the camp sight. Here is how I fixed it!
Vložit
- čas přidán 1. 10. 2023
- This 99 Fleetwood Bounder has a hydraulic leveling system. The problem is that it won't go back up once it is in the down position. In this video I will show you how to diagnosis the issue and hot to replace the back induction coil.
Deltrol 10238-66 12VDC Solenoid Coil 16W Hydraulic Power Unit Lift Dump
amzn.to/3Q092gP
Deltrol DSV-080-2NCP-N Solenoid Cartridge Valve, SPX Stone/Fenner VF-4009
amzn.to/45eEKeB - Auta a dopravní prostředky
I have a 1997 Bounder with the exact same system, minus your jacks in the centre of vehicle!
My jacks still extend and retract fully, but the PowerGear system recently stopped detecting that the jack was fully retracted (I checked that it was fully up). So the system is beeping constantly when I drive, because it thinks I'm driving with jacks down. Any idea how those detection systems work, and how to solve?
Thanks!
i have the same problem. what is the part nuber. mine was missing when i bought it.
Check the description I have the part numbers and Amazon links loaded.
How did you manually get yours retracted? I have a broken wire snapped at the “leg valve assembly” right above where you talked about the dump valve and I have a jack stuck downward I can’t get retracted until I get a replacement part
Try a wire splice or an alligator clip with good wire.
I tried a wire to jump from the positive connection to where it broke off but I couldn’t get enough of a connection to trigger it at all. Found the owners manual from the prior owner and the company printed on the manual has since closed. Trying to look up the part number and haven’t had any hits yet on all the major selling sites.
I had to break the line loose and drain off the pressure.
Awesome, that worked to get it to retract. Thanks!
@@danwilliamson3977 for something mass produced you’d think the parts would be easily available. It’s not the space shuttle! I’m speaking through experience