LBP3 Tutorials [3D Layer movement]
Vložit
- čas přidán 27. 08. 2024
- LBP3 Tutorials by Danx87 Fed up with the little hop sackboy does when changing layers? the solution is 3D layer movement... and heres how to do it.
P.S The Thermometer is high because of the custom photos not because of any of the logic.
Its been 7 years but i dont care: i managed to understand how it works and make it into a working character that actualy moved in and out instead of a sackbot
how?
first time i actually sat down and studied something related to lbp.
Same!
Would it be that hard for the developers to just simply make this a feature you can turn on and off?
Dawuud Gibson should be fairly simple to turn this feature on / off yes.
Dawuud Gibson the game is abandoned
Dawuud Gibson i know right! 🙁
LittleBigPlanet 3 Tutorials
How do you make it so the when you press L3 it makes the Sackbot move 1.5x faster? I did it so that you have to hold L3 to make him go 2× faster , but I want it so that you have to press it to go 1.5× faster and after a short amount of time you will stop sprinting and if you switch rotate your L3 it stops you from sprinting. like if I'm going north and I start going east I want it to cancel your sprint and if you're going Northeast and I start going Eastsouth I want to cancel your Sprint too.
Do you know how to do that? I tried using timers and stuff but I'm not sure how to do this.
( I found that Sackboy speed was about 3.8 of whatever measurement the game uses )
LittleBigPlanet 3 Tutorials nvm I got it :D
you're really doing a service to people here, danx87. I never would have figured this out on my own. now to combine it with the dash & glide mechanics I was doing.
Can you just publish this as a level and let us pick up the item so we can do this easily?
I have been trying to find a video like this for a very long then for the totorial keep up the good work
this was very useful thank you
Late to the scene as always, but hey, I didn't have enough money to buy the game until now. Anyway... this all worked perfectly for me. Until a minute or so passed, then all of a sudden whenever I jumped, my sackbot froze in mid-air. I checked everything, and it all appears to be correct, but I just in case I was inclined to ask if you knew why this occurs, and how to fix it. Thank you so much man, your tutorials are amazing.
+I Really Am Sora Sounds like the state sensor on-wards is not set up correctly. rewatch from about 6mins to check.
LittleBigPlanet 3 Tutorials Alrighty, I'll see about that. Also, it's incredible that you respond to people so quickly. Thanks a lot, man.
+LittleBigPlanet 3 Tutorials Hmm... nope. Nothing's wrong there. Maybe the game just glitched out, I'll start from the beginning of this tutorial and try again. Thanks anyway, man.
I Really Am Sora humm, if you cant get it sorted, then I will come have a look, (if your on ps4) if not I will make a copyable level containing it, So you can copy to your moon and capture it ;D
LittleBigPlanet 3 Tutorials Nah, I figured it out. Thank you, though, I appreciate the offer!
0_o Forget the sackbot I need to know how to do that thing with the room
+TheMightySwooj The room was already made, The wall just moved from the front layer - to the back (& during movement had no collisions) ;D
+LittleBigPlanet 3 Tutorials hmmm ok well thanks for replying you've been a big help so far in your vids
How do i did everything but I cant control my sackbot
I know its not letting me control it!
Bruh
Hey, quick question, may just be something on my part, but when I try to go into a controllinator, it doesn't show the prompt or let me go in to in with triangle. Can you help? And yes, I've tried it in create and play mode.
damn i dont know either i killed myself doing this just to realize this :(
Are there ways to make objects move in 3D as well? Or at least is it possible to say make a car that U-turns? (If I make the front of a car facing right, I want it to be able to U-turn so the front can face the left too. I don't want to drive to the left in reverse). Thanks! :)
Hook rail
Sadly no
Of course! You can just use the in/out mover to change the block's layers, then loop it so it moves smoothly. You can also change the speed of that logic piece, so that's even more convenient.
LittleBigPlanet 3 Tutorials How do you ride the Sackbot?
the speed of sack-boy is 4.4 so you can set the in and out speed to that.
I thought it was 4
it would be close
Ey Danx, great tutorial, I was planning to make 2 levels with a story! the first one is without 3d movement but the second one with the 3d movement will blow their minds! :)
Sounds awesome!
Yup! I'm excited.
@@MistaBunssLikesTurtles How’s it been?
Update?
@@garrynewman6211 lmao i stopped playing
wow,
nice way to make some room for that logic.
For some reason on mine it didn't let me get in the sackbot...
Me too!
2020
Hey danx is there a way to set it so that which ever the sackbot ends up faci ng the direction he last traveled in? Example he stays facing right when he walked right.
this is like lbp2,they make the most simplist things complicated to do at all
Can you please make a tutorial on how to do this with the broadcast chip? I can't get the controlinator to work right for some reason.
The character moves weirdly when moving left/right and I can only seem to move between only two layers.
+JGamezOfElzam set the controlinator to be a receiver of the nearest player. With the B-chip being put on the player.. the nearest will be the owner of each B-Chip! ;D
No... it works! it REALLY WORKS! omg! O^8
LittleBigPlanet 3 Tutorials Alright, it works with sackboy but I cannot jump to the front of the screen, also, when I use it with Oddsock, Toggle, or Swoop, they do not have moving animations when they move directly front or back.
Is there a way to have them jump directly forward towards the screen, and how/is it possible to have Oddsock, Toggle, & Swoop get their moving forward and back animations?
JGamezOfElzam On the character animation tweaker you will need to tweak/add a new animation for each of the other sack things... as toogle can only do toggle animations & so on. So change the Character Type and select the animation you want to use.
The jump directly forward is being disabled due to pressing down and jumping is already used as a mechanism (in LBP) as jumping down off of the platform your on. you could add your own jump (using logic)if you really wanted. ;D
JGamezOfElzam as swoop this also adds 3D flying XD
Great video very informative! Can you do a tutorial (if possible) about 3d moving objects?
I just have a simple question. How do i do the wierd blue square on the sackbot? I can't even control him manually but he follows myovements. The code is correct but i can't control him with the controller. Pls help
The blue square is sticker panel set to 0% opacity. Place a controlinator on it and set to transmitter. Place a 100 speed follower in the circuit board. Also place a max speed gyroscope. In the sackbot's circuit board, place a controlinator set to receiver. Make sure the two controlinators are set to the same color. Also place a tag on the sackbot circuit board and set the follower to follow the tag (green, labeled sackbot).
Thank you it was super easy!😉
it doesn't let me ride the bot
Me to
Its not working
Thank you for the help, managed to do it on my first try. Great teacher, nice video mate
LeoKing2450 are you British?
Did u make a video about an complete 3D camera (not third person, should be first person)? I search for a longer time now but didn't find anything usefull so far. Would be awesome if u can help me out!
How do i attach controler thing to bot outside of him
Yay! It works perfectly, thank you so much.
koladegato your welcome ;)
Everything works perfectly, but when I move my character/sackbot Through layers, they just slide forward.
actually you just misunderstood what he did sorta
nice furry pfp btw, changing mine when i find out how to edit my page
Can't get into the sackbot
you can take out the sackbot by taking something invisable THEN take all the logic from the sack bot put it in a brodcast microchip on the invisable block and BOOM it works with health bars 3d movement even sackpocket will activate
Awesome! I can make some great levels. Love the Tutorials!! ❤
How did you place the controllinator
dylan crippen Check my channel for sackbot camera follower ;D
Yeah how
Place it, using the sticker panel material and change the Opacity down to 0℅ to be clear
Super simple :D
For some reason it won't let me choose the animation, it doesn't come up in the tweak menu, anyone else have this problem?
Yeah it doesn't show for me too (ps3) Ive been over the video 3 times and I cant work out why this isn't working for me, even without having the running animation its not working at all?
StoneRR31 odd, must be a missing element in ps3 version. Sorry I cant help anymore than that guys! ;D
No problem, I'll see if I can tweak it, I'll let you know if I get anywhere
Yeah thanks anyway! I found a giveaway level with one, although its done alot different. Picked up your top down 360cam also =D
StoneRR31 Cool glad you found a solution. That 360' topdown sack bot took me a Loooooong time ;)
:( PLEASE HELP ME!!!! i did the hole code but i cant interact (or do the triangle thingie) how do i do it?????
He is using a controllable sackbot. He shows how to make it in his other video czcams.com/video/O_eFLPessZo/video.htmlsi=fwGXL4yy_4ieHt7Z
Everything's working correctly but the sackbot is still moving from later to later rather than moving in 3D. Should I just watch the video again?
Mine didn't work on my player but it did on the sackbot
Absolutely brilliant.
For some reason when I move to the back and front layer it makes me not run but when I move left or right I'm running. Can ya'll explain that please I'm confused.
For a second I was confused because on my screen the inverter turned on until I found out I was unpaused!
it can be copied over to your sackperson as well this is cool
It looks cool and i followed it, but it didn't work, does the tag have to be a certain setting? How do i even enter it?
He's using a controllable sackbot. LBP2ScorpSkull has a video on how to make one czcams.com/video/UuCxF1WgYZM/video.htmlsi=YtHEPcFdygY5aRQl&t=111
My sackbot moves back and forth yay but IT WONT MOVE SIDE TO SIDE i follow the directions so perfectly
For some reason, the sack bot would just switch layers like normal, and not smoothly, can you help me with that?
I can't seem to jump from the back layer to the front. But I can do the opposite
i did everything you said to but it didn't work. i still have to jump to other layers within the sackbot.
Apparently when I use the advanced layer mover it just hops instead of smoothly going through the layers, why?
LysanderDaBest sounds like you havnt set up the animations and state sensors properly.
I had same problem. Had to add gameplay tweaked and disable automatic and manual layer switching. Hope this helps someone
Hello, great tutorials. Would you have anything in regards to tips for a swimming level in regards to 3D Layer Movement. Like, how to use swimming movement in the water? THANK YOU
That doesn’t work when you do that stuff when I did it
I tried this on a level I was making. Thing is there was a ladder fairly early on and when I stopped climbing my character would flip and then just appear to be holding onto nothing with its back to the climbable surface.
Is there more logic required to resolve this or did I just do something wrong?
hummm... i will test and get back to you
I'm also having the same problem
I have also noticed this bug in game, happens a lot to me in create. Bit of a pain but save an exit and go bk in sorts it ok for me.
For me it seems to be a little bit twitchy like if you stop moving between two layers it will snap to one or the other instead of resting in between the two. Also collision seems a little weird. Is there a workaround. did I mess up, or are those corks that can't be worked around?
Bro...amazing
How do you get inside the sack bot and control it ? Please help
my camera doesn't follow th sackbot? the still camera isn't on
It worked!!!!!!!!!!!!!!!!! Thank you
So, I did this exactly how you did, but when I'm running into different layers sack boy still does the layer skipping animation.
I tried to copy when you do it but I can’t make him moves
Weird question, but would letting the state sensors have a normal output and setting the AND gate to have an inverted output work too?
How would we make one that flies in 3D movement? I’ve been trying to create a cool vampire sack bot using ur tutorials but having trouble figuring out triggering flight.
So is it possible to make the sackbot keep facing the direction it leaves off?
Yes it is. But how to do it is the question
Followed the instructions to a tee but the layer change clipping still happens despite the in/out mover
How exactly could you make it so you don't need any sackbots. I think it is possible doing something with broadcast microchips but I don't really understand how
Me when watching your vids 0:39
Wait? Wha!? How did you? The more that I see the more and less I know!
So I tries to recreate it and succeed but I can't actually touch the obstacles...
Oh uhm the video really helped me until I realised I already had a 3D movement chip
P.S. Could you do like Boss battles next as in fases and such?
The Camera won't move with the sackbot for some reason.
Cool Man as long as the controlinator that you are sat in is set to follow the sackbot then the camera will follow as normal.
Is it possible to create a small area and/or surface that will disable 3D Layer movement if the player goes over it? So for example:
____________________ *______________* _____________________________
Area A Area B Area C
So when a player is in Area A or C, they can use 3D Movement, but if a player goes into Area B, they cannot use 3D Movement unless they leave that area (go to Area A or C).
+JGamezOfElzam +JGamezOfElzam Of course, add a microchip into the B-chip & place the controllinator inside it. Then add a impact sensor (set it to touching & ((tag Blue lable no 3D)) & invert it) to the B-chip & its output into the activeation of the microchip, Lastly add some sticker panel / holo material (invisable) to the area that you want it to disable 3D movement & place the ((Blue tag lable no 3D)) onto the material.
Then when you are inside the material 3D should disable ;D
Ah cool!, thanks for all the help! 8^D
JGamezOfElzam your welcome ;D
What is all the or gates for? It works without as well...
I went on ps4 and did all the steps to the character animation thing but it Wont let me change the animation
this video is made in 2015, thats why it’s not working (edit: it does work, it’s just that i did it wrong)
Does this work with LBP2 Muppet DLC's attract-o-gel ( or tweaker).
T Johnson not sure (have not tested) I cant see why It wouldnt.
my character animation tweaker doesnt allow me to choose the animation...WTF!!!!
How did you place a controlinator in the sackbot?
by opening the sackbots microchip, hover your popit over the sackbot and press R1.
No i mean how do you place a controlinator "on"
The sackbot. So you can control it.
It don't show triangle when I'm near sackbot.
Brandan Gaming ah I see you want to know how to control a sackbot! luckily for you I have already covered this in a tutorial! here you go: czcams.com/video/O_eFLPessZo/video.html
Thanks!!!!!
Level link?
I did everything right and I followed your steps but it wouldn't let my sack person go though layers like yours did i still had to push up to get the sackbot to move in and out of the layers
Which controller do you put remote on?
Haven't got Character rotation tweaker and state sensor?Help please!
+Super Mad Gamer nevermind LOL -_-
Is it possible to project all this logic unto a sackperson using a broadcast microchip?
+ThatOrangeDragon Yes indeed! =D
+ThatOrangeDragon mind you would have to change the controllinator to be controlled by the nearest player ;D
LittleBigPlanet 3 Tutorials DUH!!!!!!...I totally remembered that...
ThatOrangeDragon hehe ;P
If you have any problems. It's not possible! It's just not! Deal with it!
So i tried this with a punching sackbot (Acrobats5) so when i did it nothing happend and plus the modafication only took away the square button or buuton (the way zom zom says it)
can't you put the whole thing inside the sackbot
For the character rotation tweaker it wouldn't let me change it to positional.
I can't control it
I can't actually go Into the sackbot. There is no triangle sign showing to enter. Does this work on ps3?
Can anyone tell me what the hell is that thing on the sack or I finish the thing its just I can get in and I'm assuming it's that bule thing
Nothing happens when I enter the sackbot, tips?
Does it work with odd sock?
Thanks.
nvm i put 2 different controllanters then added another
Wow it works! Thank you!
My sackbot doesn't move in and out smoothly. It just comes to a halt when going between layers.I have not one idea why, but I'm sure I'm doing something so obviously wrong. Any help?
you gotta turn off layer shifting in world settings
wow I didn’t even know lbp still had an alive and kicking community
my character is not rotating correctly...
how do i controll the sackbot
So This is how dreams was created wow!
I already have a community chip with this programation sorry but I don’t did it :/
Hi :) first thanks heaps. I notice you can't jump dewards the screen (pressing down and jump) unless you jump in a different direction first but using the double jump you can double tap jump to do it. Do you know how to fix it so you don't need double jump to do it? Also if I have the creatanator I run funny
Is there a tutorial that shows how you made the objects appear out from the wall.
How do you enter and get the sackbot to move? I tried everything
How did other people do it
Make a piece of sticker panel (or hologram) put a controlinator on it put in a sackbot put a tag on it, put a follower into the controlinator make it so it has 100 speed 100% power (or acceleration) make it follow the tag that the sackbot has in it put in a con... Just watch a tutorial on how to do it
Thanks I can make a Gta level
I’m assuming your done with it by now, what’s it called?
How did you make the sackbot
R stands for restricted
Tm stands for trademarked
i cant use the controllinator