How to change a Door Seal on a Beko Washing Machine
Vložit
- čas přidán 5. 07. 2024
- this video will show you how to remove and replace the door seal on a beko washing machine, this does not apply to all beko models!
applies to WM, WMA, WMC, WMD ranges, may do others
please take a look at my amazon wish list:
www.amazon.co.uk/hz/wishlist/... - Zábava
A brilliant and realistic video. Much appreciated.
Thanks for the tip about washing up liquid.
I almost was going to call a company to fit it up, but the explanation in this video helped me (fitting the inner and outer lips is the key) everything fixed together easily after that. Thanks!
Thank you so much, the metal spring and wire had come off mine, and I've just managed to put it back together, I was panicking thinking I'd have to buy a new machine.
Found it much easier to refit the spring clip by starting at the bottom (with join at the top) - once a third of it is in place, you can "stand up" from the knees to stretch the spring back over the drum. Much easier than trying to pull it down as shown in the vid. Hope this helps, and many thanks for the brilliant video 👍
I did this for the first spring but second one is a nightmare
I have been stressing for 3 days having removed the door seal, could not get the bugger back on. Considered getting an engineer to sort and fit the new lock but you are a hero. Just went downstairs and tried your method from the video, the springy round coil is a bitch but all done. thank you so much. J
Great. Very useful, real-world, practical guide. Getting front panel off was slightly different on my model but the seal basics were identical. Many thanks. Was a massive help!
Watched the video and then did a lot of pausing as I wasn’t as quick 😅 excellent tutorial and now doesn’t leak 👍
Glad it helped!
Great Instructional video, I'm totally hopeless at things like this but, after alot of pausing and rewinding (and swearing) I managed it, cheers dude 👍🍻
oh, and my thumbs hurt! 🤣
Like to say I’ve fixed my washer machine thanks to this video, took an hr tho lol
Really useful, just changed mine without any problems
Thank you!!! i was about to buy a new washing machine this morning because i pulled the seal all the way out while stupidly trying to clean it and not knowing it has a back tight ring as well, i saw your video and i have a different brand machine but it was enough for me ,,, thanks again for your video! worth gold i was looking for a clip in Hebrew (live in Israel) but they all have a lame explanation with a bad camera angle
Top bloke! Thanks for the video. Job done
Fixed my machine. Thanks for the vid
You made it look so easy, but enough advice for me to tackle my own if I had to. Great vid as always x
well presented your directions where easy to understand and no special tools needed use to do this long time ago but good to be refreshed excellent hope you do well thanks again xx
Thankyou for this video was massively helpful :)
Really really useful, Thank you!
Thanks so much for the tips it worked 💪👷😀god bless stay safe 🙏
Thank you so much for the detailed video
Great instructions. Thanks
Many Thanks for this vid! I'm about to do this task soon. Wash liquid and pointing out the locating arrows very good tip! Just a thought - would the handles of two spoons (used like tyre levers) be useful in siting the inner spring? It looked like your fingers were nearly garrotted!
One would do yes
Very helpful. Thank you
I just can’t get that final spring on it
I'm struggling to get the circle spring back on. I am pretty close, but it keeps pulling the seal out. Any tips on technique?
Washing up liquid, work slow or have someone hold it in one side while you do the other, otherwise use a couple of tiny flat blade screwdrivers to help lever it on
Does this work for all beko models? I hope so. Other videos take the top of the washer off and I don’t want to have to do that due or it’s location
Older bekos yes, current ones have a slightly different front that you need to take the lid and fascia off to remove
Is it possible to do it without taking the front panel off?
Yeah if you’ve got small hands