A dainty ring, wire wrapping tutorial, beginner difficulty
Vložit
- čas přidán 28. 08. 2024
- in this tutorial I am going to show you how to make this ring.
💜materials needed to make this ring.
*20 or 21 gauge base wires 2 pieces cut into 5 to 6 inch portions. adjust length according to the size you'd like
*30 gauge weaving wire 2, pieces cut into 1 foot portions. adjust according to the size ring you want to make.
*21 or 24 gauge half round weaving wire. one 1-2&1/2 foot portion. adjust according to size the size ring you'd like to make.
8mmx4mmx2.5mm cabochon
💜tools needed to make this ring.
*ring mandrel
a.co/d/2IlHmCz
or wooden dowel that is the size ring you'd like to make.
*flush cutters
a.co/d/2IlHmCz, or side cutters
*pliers I used tweezer nose pliers
a.co/d/1kvyEpe
please consider joining my Patreon for full library access, exclusive pre release designs starting at just 1$ a month 💜
/ erikascrogginsjewelry
Hope you redo this tutorial so all of it can be seen. Ring is awesome. Very talented
Can I just say it made me so happy to hear those babies in the back.
Awwe! Thank you 💜
You already know we can't see most of your work. The ring tho....is beautiful!!! Love it!!
A very lovely design but I bet it’s not as easy as you make it look. Thank you for not jabbering all through the video! And thank you for sharing your design 😊
Pretty ring but could you protect the field of view a little better because a lot of it was on the edge of the screen bottom or out of view. Thanks bcz it really is pretty. Merry Christmas 🌲
I so wish I could've made this but I just can't see the maneuvers!
Draw a square in the area you are working on and check the camera before with your movements within that square - so this way you will know to be in view all the time@@kelseyharper4225
Can't see what you are doing
I am screaming in delight. I love this ring and you make it look so simple. Thank you so much for showing this. Its awesome.
Thank you 💜
Off camera too much. Ring is beautiful
Agreed. Same issue on other tutorials. You can’t learn if she isn’t talking and off screen.
Very nice, but please, next time would you adjust your camera so we may see the whole process.
Love it! Thanks for sharing...can't wait to try this one!
im new to your channel and wirewrapping, can i suggest something like remaking these videos, ive looked at alot of them and theres times where your not in camera frame doing something, this is very confusing to those of us that are new to wire wrapping. This is constructive critism not me being a troll, i really love the rings your showing how to make i just think people may go to someone else videos to make their rings if they cant see all the steps .
all the rings you make are beautiful, please help us newbs out!
Such a beautiful ring! Thank you for sharing your talent with us!
Thank you & your most welcome 💜🤩💜
YES!! THIS IS GORGEOUS! THANK YOU SOO MUCH! Keep going! You're doing great! & looks like you've gained followers since I last looked at your YT main page! Congrats! Toy should DEFINITELY mention your etsy tutorials more! I'm SURE PEOPLE WOULD BE SUPER DUPER INTERESTED!! I know yours are going to be some of my next purchases! I was really excited, impressed and SURPRISED by the number of tutorials you have there! [The beauty/ talent is already implied from your YT tutorials & goes without saying!!] Anyhow, just a suggestion because I just really stumbled upon them when looking at other stuff!! - OR - as MANY, MANY others do - do your own mini-commercials! & "preview" your unique little beauties that you have the pdf tutorials for on etsy!
Anyhow, love it!
Aloha & Mahalo Nui Loa! 💜🤙🤗🤙💜
P.S. In addition to just mentioning the etsy stuff [& I don't know all/any of the rules, make sure to check that before doing it] you should at least put links to your etsy shop.... it MUST be allowed because I've seen SOOOOOOOOO MANY OTHERS WHO DO IT! Def. check it out though! Couldn't hurt to cross-promote! Especially with your talents!
Please stay on screen as your doing a step then hold it still to show what it looks likewhen your finished :(
Thank you for your feedback, I got a new recording set up come and check it out!!! 💜💕
Reset camera need to center your work.
Off cam . Still love it
This is an excellent tutorial...new subbie and thank you sooo much!
This is a great ring! Thanks for the tutorial!
Tysm 💜
It was 8mm by 4mm and 2.5mm thick .
Great job! Really beautiful
Thank you so much!
Can't see what you're doing.
Very pretty. TY for the great video.
Beautiful ring I love the way the light can shine through the stone it make the stone sparkle its a fabulous design,
I do have a question about the base wire did you use half hard or dead soft wire? I apologize If you said which you use in the video I didn't catch it. 😊
Beautiful!!!!! ❤
Very pretty, thank you ❤
Thanks
Yvw 💜
Thank you it's beautiful
I ❤️ watching your videos.. just one thing you go off camera several times and it’s hard to see what you’re doing
So much out of view and no explaining of what’s happening. What did you do for the weave?? One and one then both? This is a beautiful ring and you make it seem simple - maybe you could redo this one or record voice overs to explain?
Beautiful ring. Where do you get your wire? Also link for "tools" only goes to the dowel. 🙂
Hermoso anillo 🥰🥰
Hi Erika, your base wires don't look round? Did you hammer them flat? Thanks
Not at all they are square wire ❤️
Please make a new one so we can see. And tell us what you're doing.
Would've been much better if camera had been directed on project and without the screaming demons in the background.
Que mal enfocas no se bien el proceso ,lo unico bueno que el anillo quedó bonito 🤩
Erika Scroggins.....I loved your video. HELP.... You said to place your two marks on the wire and wrap from one point to the other BUT how did you figure out where to put the marks for the different ring sizes. Do you have a tutorial for that because it was not included in this video and I want to make these rings for my daughters for Christmas gifts.
I will make a short tutorial on where to mark your wires for ring sizes :)
@@ErikaScrogginsJewelry I will watch for it. Your design is fabulous but I do not know how to measure for each ring size or how you figure out the measurements for different size rings. So it will be super helpful for newbies❤️❤️
Can't see what she's doing a lot of the time..needs more explanations
Erika, what size cab did you use for your ring?
7-10 mm can be used in this ring 💜
Can I ask what weave you did please
It is a wrap I believe ❤️
555
777 ✨
im sorry, but i just cant see what you are doing. and the whole bring it in and bring it out doesn't make any sense to me. in and out of what?? definitely not very informative. its like you are telling yourself what you already know. Try to remember that this is a tutorial and people haven't tried this design before so you need to be a bit more elaborative when giving instruction, or at least show on camera... and what does 2 by 2 weave mean??? 2 what?? inches, milllimeters, wraps around each wire?? very confusing... but it is a nice ring.
Mo se ve mada lo tapa mucho que lastima
Can't see what you're doing and you don't explain
YES!! THIS IS GORGEOUS! THANK YOU SOO MUCH! Keep going! You're doing great! & looks like you've gained followers since I last looked at your YT main page! Congrats! Toy should DEFINITELY mention your etsy tutorials more! I'm SURE PEOPLE WOULD BE SUPER DUPER INTERESTED!! I know yours are going to be some of my next purchases! I was really excited, impressed and SURPRISED by the number of tutorials you have there! [The beauty/ talent is already implied from your YT tutorials & goes without saying!!] Anyhow, just a suggestion because I just really stumbled upon them when looking at other stuff!! - OR - as MANY, MANY others do - do your own mini-commercials! & "preview" your unique little beauties that you have the pdf tutorials for on etsy!
Anyhow, love it!
Aloha & Mahalo Nui Loa! 💜🤙🤗🤙💜