hello Mr! i have an opel astra 1.9 150hp and i am about to take the inlet manifold out because my car is smoking black while hard accelerating, i already tested injetors and they are fine, egr e out with a blind "seal". it might be the manifold full of "coal" and the sensor too... because i noticed the old blind seal was already broken in half from previous owner but the egr valve was not letting gas pass throught it anyway because it was closed.... i think what lasts to check is to clear the manifold and take out the flaps because they already have a tiny leak... what do you think? i tried to remap it to 200 hp but it only made 160 and a bunch of black smoke the remaper told me to leave it stock and fix the problem and then we remap it
@@MeFixingEverything thank you, I am looking to do this operation on my Signum this week. Do you also have to delete the EGR valve If You blank off the manifold?
Please do you have a purchase link with the correct measurement? Those who sell on Aliexpress comment that they are 18mm and are large for opel z19dth zafira b. What is the correct measurement? Some comment that they come off over time, is that true? Greetings
hello Mr! i have an opel astra 1.9 150hp and i am about to take the inlet manifold out because my car is smoking black while hard accelerating, i already tested injetors and they are fine, egr e out with a blind "seal". it might be the manifold full of "coal" and the sensor too... because i noticed the old blind seal was already broken in half from previous owner but the egr valve was not letting gas pass throught it anyway because it was closed.... i think what lasts to check is to clear the manifold and take out the flaps because they already have a tiny leak... what do you think? i tried to remap it to 200 hp but it only made 160 and a bunch of black smoke the remaper told me to leave it stock and fix the problem and then we remap it
Does this require any modification in the ECU (software) as well, or will the check engine light just stay on?
no check light after the mod.
@@MeFixingEverything thank you, I am looking to do this operation on my Signum this week. Do you also have to delete the EGR valve If You blank off the manifold?
Please do you have a purchase link with the correct measurement?
Those who sell on Aliexpress comment that they are 18mm and are large for opel z19dth zafira b.
What is the correct measurement?
Some comment that they come off over time, is that true?
Greetings
Unfortunately , don't remember and only you can see what I said the video
@@MeFixingEverything It could be useful to use some type of cold solder like Nural on the base.
As you saw I had a bolt in each one. Liquid metal on top.of them.is good as well. The best option is to weld them
Sürdüğünüz sıvı nedir
Brake cleaner and throttle body cleaner
where can I buy it ?
I bought it from eBay, but could fine it local as well.