You missed the most important instructions of using these breakers. Firstly the top 1/3 of the chisel needs to be liberally greased with EP2 when you insert it. Then you need to pump grease into the hammer cavity using the zerk with the big arrow pointing to it. This should be regreased every few hours of use, usually 5 to 10 pumps. All the zerks on the breaker pins and digger pins/bushes need to greased and never use the breaker with the boom or the dipper cylinders on full extension. Doing this will greatly extend the life of the breaker and the service life of the digger. Your other demonstration video is poor, you need to give instruction on how to operate the breaker correctly.
What is the diameter of the chisel tool? Can you fit a fence post driver tool in this hammer? if you could, then the jackhammer attachment can drive fence posts without having to deal with the auger bit and its problems. In rocky substrate, like the shale rock you have on your farm, a longer chisel tool could drive a pilot hole in the ground before pounding in the fence posts.
Hi Nick great job , 👏 , do you need any special leaver to activate the jack hammer or is just plug and thats it , i saw there some kubota that have a leaver , is the case in these machines
The breaker's hydraulic ports are marked IN and OUT. With the majority of these Chinese excavators if you connect the hoses left to left and right to right (without crossing them over) then the breaker will operate by pressing the auxiliary circuit foot operated rocker pedal downwards. These breakers are fitted with check valves so they can't be operated backwards.
4:50 Please note that the Back Head pressure is not 14 to 16 psi, it's 14 to 16 bar which is around 200 to 230 psi.
I'm glade you showed how to pressure up the jack hammer. How often do you have to charge it
this kind of educational video is the best advertisement
Maybe next time y'all might want to rehearse the implement installation.
EXCELLENT info! thanks Nick!
You bet!
You missed the most important instructions of using these breakers. Firstly the top 1/3 of the chisel needs to be liberally greased with EP2 when you insert it. Then you need to pump grease into the hammer cavity using the zerk with the big arrow pointing to it. This should be regreased every few hours of use, usually 5 to 10 pumps. All the zerks on the breaker pins and digger pins/bushes need to greased and never use the breaker with the boom or the dipper cylinders on full extension. Doing this will greatly extend the life of the breaker and the service life of the digger. Your other demonstration video is poor, you need to give instruction on how to operate the breaker correctly.
We plan to make better instructional content this year.
Thank you simon
How much for the spring loaded quick attach?
Need andrew camarata to test 1
Wouldn't last an hour in Camarata's hands. Haha.
Everything i needed to know. Thanks!
Glad it was helpful!
What is the diameter of the chisel tool? Can you fit a fence post driver tool in this hammer? if you could, then the jackhammer attachment can drive fence posts without having to deal with the auger bit and its problems. In rocky substrate, like the shale rock you have on your farm, a longer chisel tool could drive a pilot hole in the ground before pounding in the fence posts.
Worst salesman ever award goes to……
THIS GUY!
Thanks for your comment and for the award! Glad to hear you like the content! ;)
Hi Nick great job , 👏 , do you need any special leaver to activate the jack hammer or is just plug and thats it , i saw there some kubota that have a leaver , is the case in these machines
Its fully controlled from the cab and attached by the hydraulic lines
@@groundhogequipment thanks for your reply but do you have the bypass handle or not
What i mean is like so the hame will only work in one direction and not backwards
Excellent info...but, how does one know which way to connect the hoses for proper operation? I'd love to see a video on that. Please and thank you!
The breaker's hydraulic ports are marked IN and OUT. With the majority of these Chinese excavators if you connect the hoses left to left and right to right (without crossing them over) then the breaker will operate by pressing the auxiliary circuit foot operated rocker pedal downwards. These breakers are fitted with check valves so they can't be operated backwards.