HOW TO: Install OneWheel GT Enduro Tire & Float Life Savers

Sdílet
Vložit
  • čas přidán 15. 08. 2022
  • This video will show you exactly how to do a OneWheel tire swap. Specifically the Enduro tire on the Onewheel GT. Also threw on the Float Life Savers! Hopefully you will be able to learn something and laugh at my struggles
  • Zábava

Komentáře • 21

  • @baileyanderson2166
    @baileyanderson2166 Před rokem

    i dropped a like for the part where you took the tire off

  • @juliosapere8010
    @juliosapere8010 Před rokem

    That’s an awesome easy approach you showed that you can do it with just your hands

  • @KaizenOz
    @KaizenOz Před rokem +2

    You don’t need to take it fully apart, remove front bumper, unplug motor cable, remove axle bolts and motor drops out

  • @RichieValentine
    @RichieValentine Před rokem

    I appreciate the trial/error and humor! This is going to be helpful when I get my Enduro... I just ordered it today!

    • @ohiohuncho
      @ohiohuncho  Před rokem +1

      If I can do it with bare minimum tools, you can too! Good luck 👍🏼

  • @RemingtonTerritory
    @RemingtonTerritory Před rokem +1

    You’re really funny man, keep up the good work. maybe we could shred in the future.

    • @ohiohuncho
      @ohiohuncho  Před rokem +1

      Thanks my friend!

    • @RemingtonTerritory
      @RemingtonTerritory Před rokem

      @@ohiohuncho my green bang bumpers reflect on the ground at night so it looks like I have a green light. Do those blue ones do the same thing?

  • @jeremyshearer
    @jeremyshearer Před rokem

    You don’t need to take off sensor.. flip board over remove front bumper then unplug the motor off the sensor then the axle bolts

  • @lico464
    @lico464 Před rokem

    Mine set at a high psi too. It was set at 60. It doesn’t scrape but I get pretty bad speed wobbles and the stability is sketchy. I’m thinking it could be warped too.

    • @c0pyimitati0n
      @c0pyimitati0n Před rokem

      Lol 60psi is extremely low
      Try setting a stock Vega tire 😂 That fucker usually takes over 100psi to set. (And it's perfectly fine, people worry too much but the tire can absolutely handle setting at that high of psi)

    • @RemingtonTerritory
      @RemingtonTerritory Před rokem

      @@c0pyimitati0n I think you’re high. My first bead set at 36 and the other at 42. I would suggest using bead buddy or tire lubricant if you are setting above 50 on a regular basis.

  • @luciaabreu6011
    @luciaabreu6011 Před rokem

    struggling putting it back on :(

  • @c0pyimitati0n
    @c0pyimitati0n Před rokem

    Yo, where in Ohio are you? I'm in Dayton if you ever wanna float

  • @rocketman724
    @rocketman724 Před 11 měsíci

    I hope this guy is a lot better at riding than he is at modifying a Onewheel……

  • @theartistsplane3575
    @theartistsplane3575 Před rokem +2

    Do not remove the power cable! Remove the motor cable! If you disconnect your battery you will brick your board!!!!!!

    • @Tactical_Taco
      @Tactical_Taco Před rokem +3

      A lot of people are misinformed on this. It only bricks if you go to change out the battery. As in opening the battery box using specialized tools and disconnecting the battery from the BMS.

  • @zollie3576
    @zollie3576 Před rokem

    քʀօʍօֆʍ ❤️

  • @deemontes7265
    @deemontes7265 Před rokem

    Keep that bad tire and round it out with a thick file tool