Great video, really appreciate you eliminating all the BS so many CZcams video have. Super efficient use of camera time! Cheers to the champagne of beers!
Great video! Makes me thirsty! My 2001 Tracker has a rubbing left rear brake. Now occasional thumping in rear end assembly. I suspect they're related. The brake work looks over my paygrade. Sure don't want the rear end to fail... $$$$$
Your year has an adjuster that is known to come loose after expanding too far. It can end up lodged in the drum and get mangled. The part can be difficult to locate in good shape. Best to inspect both before its too late. Thanks for watching! Glad you enjoy our video's!
Hello Hwy83 Great video I have a question if you could help me out I need to know the axle gear ratio for a geo tracker 1996 2 door automatic My is 12 bolt ? Thank you
I have a 1995 tracker 5 speed makes a clunk noise when going from first to reverse of some times in between gears . Done checked the u joints thx for any info. Thanks for the videos.
Hey there! I’m in Australia with a 93 LWB Vitara. Any ideas on the rear diff bolt count (10 or 12) and front diff spline count (26 or 22) saves me taking it apart to order lockers then remove again in 8 weeks after order :-)
Great video, really appreciate you eliminating all the BS so many CZcams video have. Super efficient use of camera time! Cheers to the champagne of beers!
Thanks for the positive feedback! 🍻👍🏼
Awesome video. Informative and straight to the point with a sense of humor.
Thanks for the positive feedback!
Great, thanks i appreciate (sorry i don't speak English)
I like this guy
Need one on pinion bearing replacement
5:35 kicking the tire method is not working 😢. Slide hammer worked. Now to find all the bolts on the bell housing to take out the engine!
Great video! Makes me thirsty! My 2001 Tracker has a rubbing left rear brake. Now occasional thumping in rear end assembly. I suspect they're related. The brake work looks over my paygrade. Sure don't want the rear end to fail... $$$$$
Your year has an adjuster that is known to come loose after expanding too far. It can end up lodged in the drum and get mangled. The part can be difficult to locate in good shape. Best to inspect both before its too late. Thanks for watching! Glad you enjoy our video's!
@@Hwy83SUZUKI Thanks for reply, Hwy! Gonna take the wheel off and look in there. Hope the weather holds up. Hope you're having a great weekend!
I toast you with a ice cold Shiner Bock beer. Good video.🍺
Cheers! 🍻
@@Hwy83SUZUKI I hope the rear axle bearing replacement is like the older Trackers. My 2002 Tracker right rear axle bearing is shot.
The galactic empire approves.
The problem is I can’t get axle seals anywhere! Aswell as the front axle spindle bushing, are there alternatives or part numbers you could provide?
I have a 2002 tracker 4dr i wanna put a rear locker in but i keep hitting dead ends any ideas
Hello Hwy83 Great video I have a question if you could help me out I need to know the axle gear ratio for a geo tracker 1996 2 door automatic My is 12 bolt ? Thank you
I have a 1995 tracker 5 speed makes a clunk noise when going from first to reverse of some times in between gears . Done checked the u joints thx for any info. Thanks for the videos.
I have a 1994 5 speed makes the same noise! I would like to know too????
Does the Tracker shop manual require me to drink Miller while I work?
Not mandatory but highly recommended 🙂🍻
Would you salvage a center link? I have a 95 parts car and looking for advice on what to keep for my 96 2 door
What is the measurement from face to face of the rear end?
Everything works better with a couple of beers
Hey there! I’m in Australia with a 93 LWB Vitara. Any ideas on the rear diff bolt count (10 or 12) and front diff spline count (26 or 22) saves me taking it apart to order lockers then remove again in 8 weeks after order :-)
In America 93 is 12 bolt rear and 22 spline front. No guarantee they are the same for other countries.
@@Hwy83SUZUKI cheers for the quick reply mate. Love the vids! Very detailed.
Is that the same techniques to work on a gen2 tracker ??
Yes, same procedure
Where do you get the Japanese 3/8 adapter?
It's a 10mm square head. Available at auto parts stores or good tool store
Bought mine on Amazon....