How to Diagnose and Replace the Fuel Pump in a Can Am Quad
Vložit
- čas přidán 21. 08. 2024
- You can find a new fuel pump for about $75 on Amazon amzn.to/3Nid4wc
Special thanks to Cyberlink Power Director editing software for wasting 3 hours ruining the Suzuki video I tried to edit- AND for freezing up twice on this video. ☺ After four hours and it being 1am on a Saturday night- it was time to just get something posted for Sunday. As I start doing these long videos with several edits I can see that it's time to get an Apple computer.....
How to Diagnose and Replace the Fuel Pump in a Can Am Quad
This is the best video for this job. If you watch this you will be ready to replace the pump. 😊 I followed the easy steps and all worked perfect. Thank you Brian.
I like the way you walk us though your diagnostic thinking as you dismantle the vehicle. Great video, Brian!
Everyone on here he told you and walk you threw all the troubleshooting steps. In shop this will cost you $500. He did everything a shop will do. If you got and of these issues the fuel pump will be replace. So stop all the if's it cant get any better than this as a DIY job. Thank you for taking the time to show all this information.
You're welcome!
One of the most straightforward repair videos I’ve ever seen, I’m about to start doing the same job on my bike later on today and won’t have to watch any other videos on the topic.
thanks for the video cheers!
Welcome Jimmy!
A great help in resolving my current Can Am issue. Engine died while on the run. Tried starting again, battery was fine motor turned over but would not fire. A Very informative video, many thanks.
Another great video. I dont even own a quad but still watched. Thanks for sharing your knowledge...you are appreciated.
FAST AND ACCURATE DIAGNOSIS BRIAN! AWESOME VID MAN!
Got a pump for my gen 1 outlander 650 on eBay for $9.99 with free shipping. Thanks for the help!!!
Great job. Saved me a lot of labor and parts cost. The dealer cost quotes on replacement pump and scanning services are higher here in Utah. I enjoy your teaching style having taught 25 yrs.
Thanks- You know I'm in Cedar Valley, Utah right?
I live in Utah. Do you do replacements for a CanAm DS 450 Fuel Pump for hire? Dealership is asking WAYYYY too much and I could try to do it just don't want to screw anything up and haven't done this before, just basic stuff.
Thanks for the feedback- I've had a lot of requests for that and for vehicles starting at the end. So why not?
What name this fuel pump??
Thank you JJ- I appreciate your contribution to the channel!
Great analysis, Can Am should hire you
Great info man! My girlfriends family has an 06 no start or fuel gauge op! Found this I am very thankful. Thank you
Thank you Brian! I was able to complete the same work on our 08 Outlander MAX 650 by following your lead. You always have had great content. Please continue and Happy Easter!
This video is extremely helpful. My pump isn't completely out however I suspect fuel pressure is low. I'm prolly guna end up replacing I suspect. Thank you for the video
Excellent video that would help someone replace an in-tank pump on any vehicle, it can be trickier then you think,great stuff Brian.
One of the best how to videos I have seen.
I love hearing it! Thanks!
Very helpful diagnosing a similar machine and failed fuel pump! Thank you!
Thankyou, you made the jod so much simpler, better than the manual.
Thanks for taking the time to make this video. You've certainly helped me out and taught me a few more things about my machine. I will be subscribing to your channel to see more.
That's a good idea. I considered it. I was concerned that a shorter radius due to length being consumed by the "V-bend" would cause feedback issues.
I went with Polyurea- I still have to do a video on it. It's super slippery when oily. (what isn't?) The decorative chips help give traction and they DO tear up paper towels if you ice skate with them, but it is SO SO SO SO SO much easier to keep everything clean!
Welcome- thanks for being a part of this
your the best. such a clean shop and very detailed vids. thanks for taking the time to do this. you seem like the kinds guy i would be friends with. very well done dude.
Thanks for this very helpful video.
good stuff....heading out to the garage to find my bent screw driver and install my fuel pump.
thank you!!!!!
Wow well done !! Thank you from British Columbia Canada
Just did mine and got a ton of purple sludge in the tank, thanks for the video!
guys a nice guy bro ! ... i listen cause hes not being a dic .. tqkes his time does it very well cant ask for much better than that ... sweet dude thx
Great video bro, appreciate the detail.
I'did mine without removing gaz tank or any other parts. Simply cut out the seat bracket to gain acces to the fuel pump and remove it. Then drill two holes on the frame and made threads. To fix the seat bracket with two 1/4" bolts.
Nice!
Excellent video, thank you for making a quality no bs video
Gotta love the Power Probe
Appreciate you making this
Some things sure do. The ATV's I grew up with didn't even have fuel pumps, but I'd rather be riding this new stuff. It's WAY better in terms of performance etc.
800r RENEGADE, worked great! Thanks!
great video! I just got done replacing my 08 outlander fuel pump. helped a ton once I had the tank off!
Thanks- way to go man!
Fisherman Pieps hey bro, before you replaced that, do you have any problems on your can am?
If the wire for the float is close to contacting the strainer, you could bend the wire so there is more clearance. Bouncing around on an ATV you might want more clearance than you have.
Great video. Thank you for the instructions. It saves time!
Gracias por tu video y tu paciencia para explicar paso a paso todo que Dios los cuide.
This was extremely helpful. Can't thank you enough
Another great repair video brian. Well done! I just purchased an 08 800 on ksl. The fuel indicator reads empty with low fuel light flashing. But the bike runs perfectly fine. I'm wondering if the float fell off down into the tank. Hoping that's my problem. Thanks for sharing this great video. Now i know how to remove the tank.
Thanks- I've honed that a bit over the years.
Thanks Brian, learned a lot, as always.
Good vid and you should do a toolbox tour next
Thank you- this one was a struggle to edit for sure.
Thanks Brian.
You can either repair the old one or buy a new one as a complete unit.
great job once again
Thanks for the video!! I'm attempting the same job, same year , 500cc Outlander and having a difficult time getting the tank with tank cover aligned back up. It just doesn't want to slide all the way back in. Any suggestions for me? Thanks in advance.
J'ai acheté deux pompes à 50$ sur Amazon et les deux ont rendu l'âme dans le même été. Maintenant je vais essayer avec une Bosh à 100$ en espérant être la bonne.
THANKS! Great video !!
The older ones look like they are way easier to work on
Thanks for the video. I’m hoping you or anyone else can help. I took rear back rest off myv2 up seat to use a rear box. However putting it back on the rear seat won’t latch fully n lock in. I must have the arm or spring out of place. Can anyone post pictures or video on how their rear seat is set up? Parts diagram didn’t help. N I’ve taken apart n adjusted a few times now. Also if anyone loses power steering when in deep water the large yellow plug under seat needs dialectical grease as it gets wet.
You do great videos! Good job
Thanks that helps me a lot...
4:11 ones for lights and top is your fan relay
I’d lose my mind with one of those atv’s! I will keep my Honda and Bayou Kawasaki
that canam is sick bro i got the 500 its sick like pull drqg and out do my honda anyday ... fuel pump lol this guy made it look easy
. sure ill still fu@k it up lol
Awesome video. I had some dirty/muddy water flow through the gas tank vent into the tank. It would not start. I pop the injector lines off, cycled the pump on and off with fresh gas in the tank and put the lines back on. It still acts like water In the fuel. I changed the in line fuel filter. It was pretty dirty. It's a 2008 outlander 800. Do you have any recommendations. Should I pull my pump and clean the pre filter? Would it be the injectors? If so how do you pull them to clean?
Thank you. It’s a great video. Can you tell me the name of brand of your voltmeter and your gadgets/Divice you used in this video I want to buy them . I greatly appreciate it
Great vid as usual. Seeing Spanky reminds me -hOe is the new family member coming along?
Good stuff ! Thanks !
excelente video ! congratulations, great help !
Hi Brian! I'm the guy that bought you John Deer riding mower, still runs great. Question replaced my 2007 canam outlander 800. I bought a oem pump it all of a sudden quit priming the fuel. you can hear it when you turn the key on . Is it locked up?
I have a 07 renegade 800 but I here fuel pump turn on but if you take the fuel line hoses off the injectors an hit start but nothing comes out of the fuel hoses
I WOULD LIKE TO SPEAK WITH YOU ABOUT YOUR AMAZON THING YOU HAVE GOING
just subscribe! been checking your channel since last summer and i find it very informative found you thru ericthecarguy link thanks brian.
i should watch all the way though first......lol
That's not the diagnostic connection by the right rear wheel, just a couple fuses. Diagnostic port is in front near fuse block panel.
i have a 2012 650. my. 5 amp fuse keeps blowing but it runs on a 7.5 amp fuse. the dealer is going to contact cam am to see if this is ok to keep it in and run it. instead of replacing the fuel pump. this fuse controls the dash and starting function. i'm worried about what damage that may cause to other components if the fuel pump is not the issue. i know my 2016 uses a 7.5 amp fuse. any thoughts . great video by the way
how many hours are on that thing it looks very clean
informative!! was wondering about the stop motion photography, was that just me and my crappy centurylink dsl?
Hey Brian I have a 2011 Can Am 800 Max Ltd similar to the one in this video. I have a weird situ. I have not done the tear down yet but when my fuel level gets below 3/4 of a tank it starts to sputter, and will stall out if I don't fan the throttle, If I fill the tank up to full and then it runs like a top. Any ideals? If I fan the throttle and hold it wide open it will usually stay running but not into rocketing down a trail doing 60 or more. I have siphoned all the fuel out and replaced it, but still the same deal with the fuel level, 3/4 it will start to sputter, top it up and good to go.
Hey i had the same problem changed feul pump and the wires inside are insintigrated??? Everything back working but worried about that raw wires back in the tank??? Can i send a pic and let me know what you think?
Nice video, do you have an idea of how much is the gas pump?
hey good job
What kind of fuel pump did you install? You stated that it was an automotive fuel pump.
Hey Brian, do you remember what the brand and part number of the replacement fuel pump was?
I know this is a really old video but is there a way to test the fuel pump to see if it’s working without dropping the whole tank? I’m not sure what it should sound like when it turns on
I show how to do that at the 4:47 mark. And later what that would be on the pins under the tank. It can be done with the tank in, but that doesn't mean it's going to be easier.
mine is 2011 and blue :) and it started to act up. i wonder if its the pump or possibly plugs UPDATE. my pump is different than yours and doesn't have inline filter :) and it is easier to get to from the top w/o taking the tank out yeeey. great vid
Having issue with mine no start. Starting fluid won’t start it. Has spark and fuel does shoot out the spark plug hole
everything just seems to get harder and harder to work on..
my tank has a rounded looking thing on top with evap hoses would that be the pump on 2011 outlander?
my question would be under fuel related, my gas guage doesn't work, i'm thinking its a fuse the f7 accessories 20a, just got off graveyard shift, so I cant wake up the neighbors and start replacing fuses,lol, i'm hoping you'll know for sure, maybe you've come across this problem, thnx.
the nissan 90 yr fuel pump works too and way cheap
Cool
Ever torn one down where every piece of that assembly is corroded?
Hi, I have an outlander 400 max xt 2008, The float gas goes down with full tank.and they don't sell only the gauge... What do you recomend me?
Regards...
Hello i have a problem with my can am oitlander 1000 2018, i recentmh changed the repleaced !! but it works bad, it can runs for 20km without problema but after that it works
Bad, im going in 5000rpm and fells to 2000
And immediatly up to 5000 and the moto stops, i need to spent 10 mins and works good,
You bet.
Man ...you are a cOoL dude ....You never even said one cuss word the whole time ! ....and Now ..i wont be cussing the whole time threatening to set that sonbitch on FIRE when i do my fuel pump on the exact same machine ! Thanks
You should check your computer's performances and updates.
You're editing long hd files it sucks on the RAM a lot.
Maybe you need an upgrade.
Mac or are not better they are very expensive can't even been upgraded.
PC are as able as apple or even more on video editing the owners are the problem they are just machines.
excellent video. Thanks I needed this! :)
In the description for the fuel pump it says for a 650??
ive got the same bike with a no crank what it thatt issue ??
for some reason my wont crank and notice i dont even hear the fuel pump come on when you turn the key
Which noid light fits?
hey thank on vid nice i took out my tank replaced all the fuel lines did nothing with the pump ?? im not convinced its the pump ??... this is what i got starts up runslike a bear gos like a raped ape then it just stops weight a few 5-- 10 minuites and away we go just as fast ..park it shut it off crankes and crankes wont start leave it for a hr fires up runs like a raped ape ... fuel pump what do you think brian thanks great video O and i could not get codes 2007 outy 800 Max Xt HO
Meliss Dear I am currently experiencing the same problem
Fuel pump isn't getting power any suggestions
I'm getting a p0232 code on my Outlander 800 how do I fix this problem
$300.00 you would think they would throw in a 5 cent retaining ring.