I know I talk a lot of shit. but honestly, you do have the best all-around SB channel right now. you guys put in that solid work, keep it fun, and dont house around.
would love to see a vans boot breakdown - specifically the og high standards vs. the pros. I've owned both & I'm honestly not sure there's much of a difference, but would love to learn with the help of power tools
That partially explains why my 5 years old with 150ish days K2 Maysis stinks so bad after a week at Timberline in summer. I think some water also got inside the boots. Thank you for an excellent boot video!
Its crazy how much goes into making a pair of snowboard boots. Ride Fuses have been my favorite, but they get soaked on warmer days. The water seems to be coming in through the heel area of the boot. Might give the K2 Evasion a go.
I've heard that about Insanos too. I have the Lick the Cat Ride Fuses, so a little bit older, and have never had leaking. Been wanting to get newer ones just because the toecap is more structured now and doesn't get pinched like on mine.
@@AngrySnowboarder In the spring we get some soggy lift lines in so-cal, but even on average days my liners are still really wet. The tops of my socks are dry which makes me think its a issue with the sole. There is a cut-out just under the heel, and I think water is coming in there when snow packs into the void. Other boots that share the same sole had the same complaint (Lasso and 92). All boots get wet to some degree on slushy days, but I noticed it a lot more with the Fuses.
I wish ride did a better job with the way the tongue is attached to the boots. Seams aren't enough on the insano. The tongue is so stiff that when you push into it it creates leverage on the seams. 30 days later seams are torn into shred and the boot is done. My old (2018) isnano did 150 days before it happened. 3 pairs under warranty last year. Too bad the fit is amazing. Good job on the video 👍
Good stuff! I've gone through three pairs of Insanos and each one I've broken the stitches that connect the tongue to the toe box of the shell. Now I drill a couple of holes and put some flat backed leather screws in them. No more tongue sliding forward into the toe box.
Have you ever tried Ride's The 92? I wonder if it's just me or the "floating tongue" (basically tongue can move around quite a bit to adjust to your feet) does crush your feet when you push a bit harder? Does anyone else get this problem?
Know this is a boot vid, but gotta ask. I have officially blown the camber out of my '21 Berserker and im looking for a similar board to replace it and put the Ride on rock duty. Alchemist, BSOD, and Super Flagship are on my short list, what else should i look at?
Do you guys have k2 thraxis and ortons as they are like the most popular boot and are about to sell out 2025s on big sites like evo right now and you guys could earn a bunch of commission
The only reason Evo's 2025 stock is low is because it's the middle of the fucking summer. Take a chill pill and wait for October, when everything is in stock.
The best snowboarding channel. Period.
I know I talk a lot of shit. but honestly, you do have the best all-around SB channel right now. you guys put in that solid work, keep it fun, and dont house around.
Fun fact
What a dope video. Just when it’s starting to feel a bit too summery, can always count on you fellas to bring it back
would love to see a vans boot breakdown - specifically the og high standards vs. the pros. I've owned both & I'm honestly not sure there's much of a difference, but would love to learn with the help of power tools
That partially explains why my 5 years old with 150ish days K2 Maysis stinks so bad after a week at Timberline in summer. I think some water also got inside the boots. Thank you for an excellent boot video!
Love all my Ride boots ❤
I'm gonna re-enact a wacky and silly thing from this episode
crank your life away like you're in junior high again, Jorkothy?
The videos you destroy stuff are the best
Coming up 190**days on my ride insanos.
I reckon they're good for another 50 easy.
Yes, I've done some
Minor repairs and taken care of them.
Yes!!! This is what I want to see. Excellent content, looking forward to more!
Its crazy how much goes into making a pair of snowboard boots. Ride Fuses have been my favorite, but they get soaked on warmer days. The water seems to be coming in through the heel area of the boot. Might give the K2 Evasion a go.
I've heard that about Insanos too. I have the Lick the Cat Ride Fuses, so a little bit older, and have never had leaking. Been wanting to get newer ones just because the toecap is more structured now and doesn't get pinched like on mine.
My Ride Lassos would feel like I walked through water in the spring.
Uh are you just standing in pools of water?
@@AngrySnowboarder In the spring we get some soggy lift lines in so-cal, but even on average days my liners are still really wet. The tops of my socks are dry which makes me think its a issue with the sole. There is a cut-out just under the heel, and I think water is coming in there when snow packs into the void. Other boots that share the same sole had the same complaint (Lasso and 92). All boots get wet to some degree on slushy days, but I noticed it a lot more with the Fuses.
@@AngrySnowboarder Spring slush in the Midwest gets soggy. Left foot was good, my skating foot was soaked in after an hour.
I wish ride did a better job with the way the tongue is attached to the boots. Seams aren't enough on the insano. The tongue is so stiff that when you push into it it creates leverage on the seams. 30 days later seams are torn into shred and the boot is done. My old (2018) isnano did 150 days before it happened. 3 pairs under warranty last year. Too bad the fit is amazing. Good job on the video 👍
Good stuff! I've gone through three pairs of Insanos and each one I've broken the stitches that connect the tongue to the toe box of the shell. Now I drill a couple of holes and put some flat backed leather screws in them. No more tongue sliding forward into the toe box.
I think that's the urethane in the tongue cracking that's doing that.
This is actually a pretty cool experiment, I’d like to see more brands for sure 👍🏼
Shoutout to Rose Anvil
Just bought some ride torrents, hopefully they worth the price
They are worth the price bro.
They are been rocking them for 2 yrs testing on Sleds and boards. They hold up to abuse great.
Do the stiffer less padded boots pack out a lot less?
They take longer to, but all boots will pack out.
Say nope to dope
Have you ever tried Ride's The 92? I wonder if it's just me or the "floating tongue" (basically tongue can move around quite a bit to adjust to your feet) does crush your feet when you push a bit harder? Does anyone else get this problem?
I don’t like the way TC is looking at me.
Can you suggest a less overbuilt but stiff boot? Foot size is 10.5 but my 32 tm2 diggers come in at 12inches.
The one that fits your foot and fits your needs. Time to go to the shop and try some stuff on
“We put liquid paper on a bee” #science
Is dc making the ply for 2025? If not what board would you say is similar?
Are they even making snowboards anymore?
Know this is a boot vid, but gotta ask. I have officially blown the camber out of my '21 Berserker and im looking for a similar board to replace it and put the Ride on rock duty. Alchemist, BSOD, and Super Flagship are on my short list, what else should i look at?
203 BBC
@@AngrySnowboarder and who makes that? Should I just track down the nearest dude named Requis
Do you guys have k2 thraxis and ortons as they are like the most popular boot and are about to sell out 2025s on big sites like evo right now and you guys could earn a bunch of commission
It's not even August I'm sure we'll be fine.
The only reason Evo's 2025 stock is low is because it's the middle of the fucking summer. Take a chill pill and wait for October, when everything is in stock.
I guess the black insanos I sent you didn’t make the cut. Too much foot slime in there?
why use old when you get brand new? I'm sitting on piles of gear for shit i don't even know what we're going to do with.
Def not wool.
thank god i've been waiting for someone to do this like @anvilrose