PS3 YLOD EXPLAINED 🔧🕹️- YELLOW LIGHT OF DEATH PROBLEM FIXED🚀💡
Vložit
- čas přidán 4. 04. 2022
- PS 3 YLOD Permanent Fix.
PS3 FAT, and why it is YELLOW LIGHT OF DEATH, I will also talk about possible repairs, fixes, and examples of how to fix and repair the YLOD. Also a lot of overheating prevention methods like refreshing the thermal paste.
Thank you for watching, feel free to check out the other content on this channel, lots of different game-related content with solutions to fix and repair it.
ps3 yellow light of death
ps3 ylod
ps3 yellow light of death fix
ps3 fat ylod
ps3 ylod fix
Enjoy!
One of the best on youtube. thank you.
computer booter ..! gang !
Glad you think so!
By far the best console tech I've seen online
WOW Thanks!
god bless you brother plz continue and thank u for sharing this video with us , and i hope one day you can teach us how to use the Oscilloscope,
Sure I will. Thanks indeed.
@@idreestech Thanks alot sir for your guidance and support cuz you save me alot and Also makes me perfect on the PS3 repair but i have thesame console ps3 with this one and always gives headache with only red light of death not yellow light, i enjoyed your videos alot GOD bless you and your family sir.
i hope i can see you doing a light reflow (with just a heating gun) on a PS3 fat someday. to see how it should be properly done. keep the good work!
As re-flow with heat gun did not work even board gets worst due to the bend in the motherboard. The bend in the motherboard causes a break of the solder ball pads circuit. So I have to spend a lot on purchasing the machine.
I already bend my cpu by the process of reflow using a heat gun which i dont even it's name THE MACHINE or REWORK STATION MACHINE
Great, thank you!
Glad it was helpful!
Shop timing? I want to visit to you iam so inspired of your work and to be honest I have never seen someone repairing ps3 this deeply Iam inspired of your work idrees bhai
Thank you so much 😀 Please place a call before you come to me.
Keep it Up :)
I will try my best
thank you sir
All the best
Excellent, would solder mask have been useful to ensure no accidental short on those wires?
Yes, absolutely
Peace be upon you, my friend. I have a device with the same malfunction. I wanted to try your method, but before I took off the taecon, I noticed that there were shorts between the ground and the positive. Is it possible that the taecon is the one that made these shorts?
No it cannot, but the ohms redings could be around 3 to 4 Ohms.
Hey Idrees nice video can u recommend a cheap reballing station and link please
www.wdsbga.com/
@@idreestech Which one and how much? No price on website?
Call their servece members.
Yes sir very helpful, but the two capastors on the backside of the GPU that is missing was not replace
We need not replace them, they are just weak not short circuits.
Same issue with my fat ps3
Sir is that an oscillator scope you’re using ??
The oscilloscope has an internal device, called a sweep oscillator, which moves the beam across the screen at a constant rate.Hence you can say it a simple oscilloscope. Oscillators are essential components that produce a periodic electronic signal, typically a sine wave or square wave.
how can i buy these capicitors koi naam hai is ka
Hello Idrees. I bought same PS3 with same YLOD problem and I found VERY FUNNY THING. When you disconect BR drive from motherboard, YLOD is gone and PS3 starts normally. Could it be NEC/TOKIN problem, how do you think? Or it might be PSU, but fans start and work well even with BluRay connected.
It is really funny. But the fault seems to be from the BR Drive Daughter board.
@@idreestech Might it be that PSU is half dead?
I thought you only needed the link wires if you remove capacitors both sides of the board ?
Capacitors too..
Yeah that's right you only use wires if replaced both side of the board and even then you only use two wires .
I doubt it's the token's anyway usually the heat from installing the tokind get things going again for a few days them Boooooom beep beep beep back to square one the RSX is shot
Can you fix my PS3
Can i send my ps3 to you for repairs?
Can you ?
How to contact you
whatsApp
میتونم باهاتون در تلگرام در ارتباط باشم استاد؟
WhatsApp
@@idreestech خب لطفاً آدرس بدید
Now do GLOD
Re-Flow the GPU.