How to Derestrict your Electric Scooter
Vložit
- čas přidán 15. 06. 2024
- This is an instructional video on how to derestrict your scooter for off-road use
Not every scooter is the same so do so at your own risk
I hope this video can help anyone trying to do this
Also works on the solar p1 pro with the same display 👍 - Sport
change power output in p settings amd unrestict speed it will be p8 in p setting
Nice video ive a yugan rx10 tops out around 40 mph, same display not sure on batt voltage think its 52 v but some say 60 will this work om my scooter? Thank you.
Great video champ. I've never come across other scooters with these grey cables. Normally just have to update the P settings. Are those grey cables common amongst other scooters?
I haven't seen them before but I haven't worked on many scooters
You don't need to but the wires. Jst change in the settings to 100
If it has been derestricted that works
But it makes no difference if it hasn't yet unfortunately.
It would definitely make things easier
may i know where those three wires will go? going to throttle or going to lcd?, thank you
I'm not sure but my guess would be they go to the display
Hihi, nice one👍
Can you do this for any e scooter or is it just this one, oh and what make and model is this one thanks
As far as I know it's any with this display
The scooter is a vyron
It's the same as the dragon raptor
does this damage the battery?
It shouldn't as it's quite a large battery and the batterys bms should always protect from too high discharge
But that being said the harder you are on something the shorter it's life
Can you show us how to do it on a ride e scooter pls
Sorry I only made the video because my gf got the scooer
Hey buddy, im in the UK and own a Solar P1 Pro (like kugoo g booster etc), i have this display but my O settings are different. Will cutting these work for my scooter? Im limited to 19kph currently and its ANNOYING
Sorry but I have no idea
You could always try it and see if it does and if it doesn't then re solder it
It's unlikely to break anything
But it's still a possibility
@@The-Stranga thank you, i managed to cut my brown and black wire, which is the EU limiter. Im now comfortably doing 52mph!!!
Do you know how to do it on a egret one???
Only if it has the same display model sorry
@@The-Stranga it's ok
What wattage was your motor and also if you wanted to add your own limit to prevent burning out the motor is that possible
They have dual 1000w motors with a peak of 1600w each
In my opinion the motors seem to not get super hot
I don't think it would be easy to put a limiter on it but I think the controller would burn up before the motor although there's probably a temp sensor in the controller
But if we're riding super steep long hills I just touch to motor with the back of my hand to gauge how it's doing
But when in dual there both working half as hard so they seem to not get so hot 👌🏼
@@The-Stranga this!!!!!!!! Many people assume the single motor mode doesnt drain more power but it does. I can tell you after various test rides in all modes with and withoutnoower start and in both single and dual modes.
DO NOT ISE ECO MODE! It’s essentially a limp home mode that draaaaiiinnnnnnns the battery! So does using single motor mode
Does this damage your battery ?
No it shouldn’t as the bms should protect it
How ever the harder you push something the more strain it’s under so if your flooring it all the time all components will mostly ware quicker
How do I do this mines different
Sorry I have no idea
If yours is different
I'm sure the info will be available somewhere
Any idea how to unlock speed limit in my yadea ks5 pro? I cant go more than 25 km in Sport mode
No idea sorry
I call bulshit , you put it on eco mode the first time round
I guess the only way you will know is if you do it your self but It made a huge a huge difference for mine